灌区管理信息系统的研制开发

在计算机技术日益向农业生产管理领域渗透的大背景下,针对灌区管理的普遍需求和项目区实际特点建立了功能简捷适用、结构科学合理的灌区管理信息系统。系统的主要功能有:基本信息服务、实时监测与自动控制、需水预测、用水调度、图形报表、办公自动化管理、数据库管理、系统维护。结合系统在项目区的应用,证明了系统的开发建设是成功的,具有应用推广价值,也可以为同类系统的建设提供参考。     

Y-Ba-Cu-O超导涂层的研制

用等离子喷涂工艺制备了 Y-Ba-Cu-O 高临界温度超导涂层,涂层的初始转变温度为101K、零电阻温度为86K。电阻率与磁化率的测量结果表明这种超导涂层具有与烧结超导块体相类似的性能,X 光衍射谱显示出涂层主要由 YBa_2Cu_3O_(?)单相化合物组成。     

Mechanical properties of iron processed by severe plastic deformation

In the present study, the mechanical properties of Fe processed via severe plastic deformation (equal-channel angular pressing (ECAP)) at room temperature were investigated for the first time. The grain size of annealed Fe, with an initial grain size of about 200 μm, was reduced drastically during ECAP. After eight passes, the grain size reaches 200 to 400 nm, as documented by means of transmission electron microscopy (TEM). The value of microhardness during pressing increases 3 times over that of the starting material after the first pass and increases slightly during subsequent pressing for higher-purity Fe. Examination of the value of microhardness after eight passes as a function of post-ECAP annealing temperature shows a transition from recovery to recrystallization, an observation that resembles the behavior reported for heavily deformed metals and alloys. The tensile and compression behaviors were examined. In tension, a drop in the engineering stress-engineering strain curve beyond maximum load was observed both in the annealed Fe and the ECAP Fe. This drop is related to the neck deformation. The fracture surface, examined by scanning electron microscopy (SEM), shows vein patterns, which is different from the dimples found on the fracture surface of annealed Fe. In compression, an initial strain-hardening region followed by a no-strain-hardening region was observed in the ECAP Fe. The yield strength in tension of the ECAP Fe was observed to be higher than that in compression. The strengthening mechanisms and softening behavior are discussed.     

大变量逻辑函数最佳覆盖问题研究

逻辑函数的最佳覆盖，一直是逻辑综合领域的关键环节。尤其是大变量逻辑函数最佳覆盖，对复杂的逻辑综合更为重要，但也更加困难。本文在对逻辑覆盖算法研究的基础上，提出了适合大变量逻辑函数最佳覆盖的Beister改进算法。经过大量算题的测试表明，改进的列覆盖算法在时间复杂度和选择效果方面均优于Beister算法。     

长庆油田苏平1井固井技术研究与应用

苏平l井完井方式运用了技术套管一次上返、悬挂尾管和筛管技术。该井技术套管段井眼大、裸眼段长，加上大斜度、小间隙的尾管段．对水泥浆体系的性能要求较高。总结分析了长庆天然气水平井苏平l井的固井技术问题，介绍了苏平l井的井身结构与地层性质。通过研究．确定采用低失水GSJ水泥浆体系。该体系成功地应用在三次工程建井过程中，解决了长裸眼、大灰量、大斜度、尾管小间隙等固井技术问题。固井质量达到工程要求。     

A bibliometric study of China’s semiconductor literature compared with other major asian countries

In this paper we compare the scientific research in the semiconductor-related field in China with some other major nations in Asia. It is based on the bibliometric information from SCI-Expanded database during the time period of 1995–2004. We show that China has been developing fast in semiconductor research, and become the second productive country in Asia as reflected by the publication profile. The evidences indicate a significant increasing trend in the research efforts and readership among Asian countries. Similar to the scientists in Japan and South Korea, Chinese scientists were more inclined to work in larger groups, typically 4 or more authors. The assessment of research quality is further conducted based on citation-based measures. As benchmarks, two western countries, namely USA and Germany, have been compared in the citation analysis. It is revealed that the impacts of research outputs in the Asian countries, except for Japan, have been badly incommensurate with their devoted research efforts compared with USA and Germany. Like most of other Asian countries the research results of Chinese scientists in semiconductor have a low international visibility despite their strong research efforts and increasingly large domestic readership. The application of Leimkuhler curve illustrates vividly the inequality of citation times among the compared countries. Furthermore, the Gini Indices of each country and each pair of countries are calculated which illustrates again the inequality of informetric productivities.     

煤粉粒度对高炉风口前燃烧性能的影响

安钢炼铁厂在喷吹瘦煤后，将小于0．074mm的比例由70％放宽到30％，使磨煤能力提高了21％。采用自行设计的风口取样器，研究了风口前气体成分和煤粉燃烧率的变化。当煤粉粒度变粗后，风口前循环区变长，放宽煤粉粒度与高富氧、高风温配合，能使高炉得到较好的经济效益。     

唐钢ER70S-6焊丝钢的生产工艺研究及质量分析

介绍了唐钢ER70S-6焊丝钢的特点，对盘条质量进行了分析。对该钢化学成分、冶炼和轧制工艺进行了优化研究，使其综合性能明显改善。     

基于B/S和C/S的高中校园一卡通系统

结合广东潮州高级中学的实际情况,介绍了高中校园一卡通系统的设计和应用.     

PRO——一种新的地震资料处理方法

PRO(影像的参数展开)技术是由俄罗斯地球物理学家开发的一种崭新的地震资料处理技术。本文从PRO基本原理入手,简单介绍了PRO的速度分析原理。PRO速度分析和成像均以信号的椭圆展开和参数展开为基础,其中参数展开方法考虑波型转换、介质的横向不均匀造成传播速度的变化。该技术抛开了传统共中心点叠加的思想,从根本上解决了以CMP方法为基础的传统地震处理技术遇到的困难。通过模型与实例分析对比,PRO比传统CMP方法更优越。