Solvothermal synthesis of Hg1−xCdxTe nanostructures—Their structural and optical properties

This article describes a facile, low-cost, solution-phase approach to the large-scale preparation of Hg_1−xCd_xTe nanostructures of different shapes such as nanorods, quantum dots, hexagonal cubes of different sizes and different compositions at a growth temperature of 180 °C using an air stable Te source by solvothermal technique. The XRD spectrum shows that the crystals are cubic in their basic structure and reveals the variation in lattice constant as a function of composition. The size and morphology of the products were examined by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The formation of irregular shaped particles and few nano-rods in the present synthesis is attributed to the cetyl trimethylammonium bromide (CTAB). The room temperature FTIR absorption and PL studies for a compositon of x = 0.8 gives a band gap of 1.1 eV and a broad emission in NIR region (0.5-0.9 eV) with all bands attributed to surface defects.     

Stenotrophomonas,Mycobacterium, and Streptomyces in home dust and air: associations with moldiness and other home/family characteristics

Respiratory illnesses have been linked to children's exposures to water‐damaged homes. Therefore, understanding the microbiome in water‐damaged homes is critical to preventing these illnesses. Few studies have quantified bacterial contamination, especially specific species, in water‐damaged homes. We collected air and dust samples in twenty‐one low‐mold homes and twenty‐one high‐mold homes. The concentrations of three bacteria/genera, Stenotrophomonas maltophilia, Streptomyces sp., and Mycobacterium sp., were measured in air and dust samples using quantitative PCR (QPCR). The concentrations of the bacteria measured in the air samples were not associated with any specific home characteristic based on multiple regression models. However, higher concentrations of S. maltophilia in the dust samples were associated with water damage, that is, with higher floor surface moisture and higher concentrations of moisture‐related mold species. The concentrations of Streptomyces and Mycobacterium sp. had similar patterns and may be partially determined by human and animal occupants and outdoor sources of these bacteria.     

Distributed parameter model updating using the Karhunen–Loève expansion

Discrepancies between experimentally measured data and computational predictions are unavoidable for complex engineering dynamical systems. To reduce this gap, model updating methods have been developed over the past three decades. Current methods for model updating often use discrete parameters, such as thickness or joint stiffness, for model updating. However, there are many parameters in a numerical model which are spatially distributed in nature. Such parameters include, but are not limited to, thickness, Poisson's ratio, Young's modulus, density and damping. In this paper a novel approach is proposed which takes account of the distributed nature of the parameters to be updated, by expressing the parameters as spatially correlated random fields. Based on this assumption, the random fields corresponding to the parameters to be updated have been expanded in a spectral decomposition known as the Karhunen–Loève (KL) expansion. Using the KL expansion, the mass and stiffness matrices are expanded in series in terms of discrete parameters. These parameters in turn are obtained using a sensitivity based optimization approach. A numerical example involving a beam with distributed updating parameters is used to illustrate this new idea.     

Processing of advanced Al/SiC particulate metal matrix composites under intensive shearing – A novel Rheo-process

Particulate metal matrix composites (PMMCs) have attracted interest for application in numerous fields. The current processing methods often produce agglomerated particles in the ductile matrix and as a result these composites exhibit extremely low ductility. The key idea to solve the current problem is to adopt a novel Rheo-process allowing the application of sufficient shear stress (τ) on particulate clusters embedded in liquid metal to overcome the average cohesive force or the tensile strength of the cluster. In this study, cast A356/SiC_p composites were produced using a conventional stir casting technique and a novel Rheo-process. The microstructure and properties were evaluated. The adopted Rheo-process significantly improved the distribution of the reinforcement in the matrix. A good combination of improved ultimate tensile strength (UTS) and tensile elongation (ε) is obtained.     

Tunnel Oxide Growth on Silicon With “Wet Nitrous Oxide” Process for Improved Performance Characteristics

In this letter, the authors present the process, growth kinetics, and electrical characteristics of tunnel oxides grown by furnace oxidation of silicon at 800 degC in an ambient of nitrous oxide (N₂O) and water vapor. Tunnel oxides of thickness 82-92 Aring are grown by this "wet N₂O oxidation" process, and the electrical characteristics such as the capacitance-voltage, current-voltage, voltage ramp, time-dependent dielectric breakdown, and charge to breakdown are evaluated using MOS capacitor as the diagnostic device. The results obtained clearly demonstrate superior performance characteristics of this oxide for Flash memory applications, with excellent charge to breakdown and minimum change in the gate voltage during constant current stressing     

No evidence for linkage of a novel CA repeat polymorphism for apoptosis antigen 1 (APO-1 or fas) with type I diabetes in a Caucasian population

Abstract DNA typing of four tetrameric repeat loci (HUMVWA, HUMTH0I, D21SII and HPRT) was carried out in a Chinese Han population from Shanghai (East China) and one from Guangzhou (South-East China) using a quadruplex PCR amplification and detection of the fluorescent-labeled alleles on the ALF DNA sequencer. All loci were in accordance with Hardy-Weinberg equilibrium except for D21S11 in the Guangzhou population. A test for population differentiation showed no statistical difference in the allele frequency distribution between the two populations. Comparison of the allele frequency data with other Chinese Han populations from North and South-West China for the STR loci HUMVWA and HUMTH01 revealed heterogeneity between Northern Chinese Han and Southern Chinese Han, which is in accordance with previous studies on the basis of protein markers.     

Stability of Interesterified Fats

The stability characteristics of a number of interesterified fat products made from vegetable oil-mixtures were studied and compared to those of a commercial hydrogenated stuff, vanaspati. It was found that the interesterified products, after addition of antioxidants had comparable stability to vanaspati in most cases, and, hence would not offer any storage problem.     

Dominant design variables in pyrolysis of biomass particles of different geometries in thermally thick regime

In this study, a simultaneous chemical kinetics and heat transfer model is used to predict the effects of the most important physical and thermal properties (thermal conductivity, heat transfer coefficient, emissivity, reactor temperature and heat of reaction number) of the feedstock on the convective-radiant pyrolysis of biomass fuels for different geometries such as slab, cylinder and sphere. The pyrolysis rate is simulated by a kinetic scheme involving two parallel primary reactions and a third secondary reaction between volatile and gaseous products and the char. Finite difference pure implicit scheme utilizing the Tri-Diagonal Matrix Algorithm (TDMA) is employed for solving heat transfer model equation. Runge-Kutta fourth order method is used for solving the chemical kinetics model equations. Simulations are carried out for different geometries considering the equivalent radius ranging from to , and the temperature ranging from to .For conversion in the thermally thick regime (intra-particle heat transfer control), it is found that variations in the properties mainly affect the activity of primary reactions. The highest sensitivity is associated with reactor temperature and emissivity. Applications of these findings in reactor design and operation are discussed. The results obtained using the model used in the present study are in excellent agreement with many reported experimental studies, much better than the agreement with earlier models reported in the literature.