Field Validation of DNDC Model for Methane and Nitrous Oxide Emissions from Rice-based Production Systems of India

The DNDC (DeNitrification and DeComposition) model was tested against experimental data on CH₄ and N₂O emissions from rice fields at different geographical locations in India. There was a good agreement between the simulated and observed values of CH₄ and N₂O emissions. The difference between observed and simulated CH₄ emissions in all sites ranged from −11.6 to 62.5 kg C ha⁻¹ season⁻¹. Most discrepancies between simulated and observed seasonal fluxes were less than 20% of the field estimate of the seasonal flux. The relative deviation between observed and simulated cumulative N₂O emissions ranged from −237.8 to 28.6%. However, some discrepancies existed between observed and simulated seasonal patterns of CH₄ and N₂O emissions. The model simulated zero N₂O emissions from continuously flooded rice fields and poorly simulated CH₄ emissions from Allahabad site. For all other simulated cases, the model satisfactorily simulated the seasonal variations in greenhouse gas emission from paddy fields with different land management. The model also simulated the C and N balances in all the sites, including other gas fluxes, viz. CO₂, NO, NO₂, N₂ and NH₃ emissions. Sensitivity tests for CH₄ indicate that soil texture and pH significantly influenced the CH₄ emission. Changes in organic C content had a moderate influence on CH₄ emission on these sites. Introducing the mid-season drainage reduced CH₄ emissions significantly. Process-based biogeochemical modeling, as with DNDC, can help in identifying strategies for optimizing resource use, increasing productivity, closing yield gaps and reducing adverse environmental impacts.     

Nitrogen incorporated diamond-like carbon films by microwave surface wave plasma CVD

Nitrogen incorporated diamond like carbon films have been deposited by microwave surface wave plasma chemical vapor deposition (MW-SWP-CVD), using methane (CH₄) as the source of carbon and with different nitrogen flow rates (N₂ / CH₄ flow ratios between 0 and 3). The influence of the nitrogen incorporation on the optical, structural properties and surface morphology of the carbon films were investigated using different spectroscopic techniques. The nitrogen has been incorporated into DLC:N films which was confirmed by the X-ray photoelectron spectroscopy (XPS) measurement. Moreover, the nitrogen incorporation was accompanied by a variation in the optical gap, which was attributed to the removal or creation of band tail states.     

Synthesis of nitrogen incorporated diamond-like carbon thin films using microwave surface-wave plasma CVD

Nitrogenated diamond-like (DLC:N) carbon thin films have been deposited by microwave surface wave plasma chemical vapor deposition on silicon and quartz substrates, using argon gas, camphor dissolved in ethyl alcohol composition and nitrogen as plasma source. The deposited DLC:N films were characterized for their chemical, optical, structural and electrical properties through X-ray photoelectron spectroscopy, UV/VIS/NIR spectroscopy, Raman spectroscopy, atomic force microscope and current–voltage characteristics. Optical band gap decreased (2.7 to 2.4 eV) with increasing Ar gas flow rate. The photovoltaic measurements of DLC:N / p-Si structure show that the open-circuit voltage (V_oc) of 168.8 mV and a short-circuit current density (J_sc) of 8.4 μA/cm² under light illumination (AM 1.5 100 mW/cm²). The energy conversion efficiency and fill factor were found to be 3.4 × 10^{− 4}% and 0.238 respectively.     

Sodium alginate–poly(hydroxyethylmethacrylate) interpenetrating polymeric network membranes for the pervaporation dehydration of ethanol and tetrahydrofuran

Interpenetrating polymeric network (IPN) membranes of sodium alginate (NaAlg) and various amounts of poly(hydroxyethylmethacrylate) (PHEMA) have been prepared and tested for the pervaporation dehydration of ethanol and tetrahydrofuran (THF). The presence of hydrophilic PHEMA in the IPN matrix was found to be responsible for increase in membrane selectivity to water. NaAlg–PHEMA IPN membrane containing 20 wt % of PHEMA exhibited a selectivity of 571 to water for the water–ethanol mixture and 857 for water–THF mixture. These data are much better than those observed for the pristine NaAlg membrane. However, flux of the IPN membranes was smaller than that of pristine NaAlg membrane. Comparatively higher flux values were observed for water–THF mixture than for water–ethanol mixture. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3324–3329, 2006     

Lipid adsorption on commercial silica hydrogels from hexane and changes in triglyceride complexes with time

The structures of and lipid complexes with two commercial silica hydrogels (Trisyl and Sorbsil 40), which contain about 60% moisture, were examined by diffuse reflectance Fourier transform infrared spectroscopy. The spectra suggested that Trisyl contained less moisture than Sorbsil 40. However, the silanol groups of Sorbsil 40 were more active in adsorbing oleic acid, triglyceride, and phosphatidylcholine (PC) from hexane than those of Trisyl. Both adsorbents strongly bound PC through the PC carbonyl and phosphate groups. Lipid adsorption from hexane solution by Trisyl depended solely on trapped moisture, while Sorbsil 40 used moisture and silanol groups on the silica surface. Spectra of triglyceride-silica hydrogel complexes, obtained 24 and 72 h after obtaining the initial spectra, showed that Sorbsil 40 adsorption was by Van der Waals forces, but the triglyceride reoriented over time with an increase in hydrogen bonding. In contrast, Trisyl initially adosorbed triglyceride by hydrogen bonding which was stable for at least 72 h.     

Mode of oleic acid adsorption on rice hull ash cristobalite

Fourier transform infrared spectroscopy was used to investigate the adsorption of oleic acid (OA) onto dry rice hull ash (RHA) silica. Adsorption partially occurred by surface hydrogen bonding of the carboxylic acid. There was also formation of carboxylate ions by reaction of OA with residual potassium oxide. These ions were strongly bound by the ash. Isopropanol inhibited OA adsorption by H-bonding and encouraged desorption of H-bonded OA, but without itself being significantly bound. RHA with 40% moisture also adsorbed a small amount of OA by H-bonding and reacted with OA to form and adsorb carboxylate ions.     

Abutilon indicum Seed Oil — Characterisation of HBr-Reactive Acids

The seed oil of Abutilon indicum (Malvaceae) contains three HBr-reactive fatty acids. These are shown to be cis-12,13-epoxyoleic (vernolic) acid, 1.6% 9,10-methylene-octadec-9-enoic (sterculic) acid, 0.9%; as well as 8,9-methylene-heptadec-8-enoic (malvalic) acid, 2.3%. Quantitative results are obtained by combining informations about the HBr-titration, the preparative thin layer separation of oxygenated and non-oxygenated acids, and gas liquid chromatographic analysis.     

Diffuse reflectance fourier transform infrared spectroscopy of phospholipid adsorption onto silicic acid

Diffuse reflectance Fourier transform infrared spectroscopy was used to study the mode of adsorption of phosphatidylcholine (PC) in hexane onto silicic acid (SA). PC adsorption was mainly through the charged phosphate group with minimal binding through the ester carbonyl. When the SA surface with adsorbed PC is washed with hexane, containing a small concentration of isopropanol, the desorbed PC is recovered without structural change, i.e., there is no evidence of PC hydrolysis in the adsorption process. Adsorbent misture probably promotes PC adsorption due to the increased availability of surface water hydroxyl groups for interaction with the PC phosphate groups. Isopropanol promoted PC binding by destabilizing PC reverse miscelles in solution, thus promoting its adsorption.     

Preparation and characterization of novel semi‐interpenetrating 2‐hydroxyethyl methacrylate‐g‐chitosan copolymeric microspheres for sustained release of indomethacin

A novel semi‐interpenetrating (semi‐IPN) graft copolymer of 2‐hydroxyethyl methacrylate (HEMA) with chitosan (CS) has been prepared in the form of microspheres, using water‐in‐oil (W/O) emulsion technique. Microspheres were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and X‐ray diffractometry (X‐RD) to confirm the crosslinking and polymorphism of indomethacin (IDM). The X‐RD and DSC techniques indicated a molecular‐level dispersion of IDM in the IPN matrix. Scanning electron micrographs (SEM) taken at the cross section of the microspheres have shown rough surfaces around the microspheres. The sustained release characteristics of the matrices for IDM, an anti‐inflammatory drug, were investigated in pH 7.4 media. Particle size and size distribution of the microspheres were studied by laser light diffraction particle size analyzer. The drug was released in a sustained manner for up to 12 h. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Deformation behavior of styrene-block-butadiene-block-styrene triblock copolymers having different morphologies

Deformation behavior of styrene-block-butadiene-block-styrene (SBS) triblock copolymers having different morphologies was investigated. Due to the combination of different methods which provide information on different deformation levels (macroscopic, microscopic and molecular) complex deformation mechanisms for each type of SBS block copolymer (including glassy-rubber alternating lamellae, rubber cylinders in glassy matrix and hard domains in soft matrix morphology) could be revealed. In combination with tensile tests, Fourier transform infrared (FTIR) spectroscopy was successfully applied to study the change of orientation in individual phases using the absorption bands at 1493 and 966 cm⁻¹ for polystyrene (PS) and polybutadiene (PB) phases, respectively. For all the block copolymers investigated the PB phase always oriented stronger than the PS phase because of its lower Young's modulus. However, differences in orientation in both phases were influenced by an appropriate stress distribution within the specimens during deformation, which, in fact, depends on the morphology of the polymers. Additionally, atomic force microscopy revealed local morphological changes during uniaxial stretching, which, in fact, depend on the arrangement of the structural units.