Functionally modified gelatin microspheres as a growth factor’s delivery system: development and characterization

One of the advances in biotechnology has been the development of the capability to produce large quantities of highly purified polypeptides and proteins. Unfortunately, the circulatory half-lives of many of these agents are short, usually of the order of minutes and the time required for a response in tissues is usually long compared to the half-life. Hence, there is always demand for polymeric systems which can deliver the proteins for prolonged period and also to protect the molecules from degradation. The present work was attempted to develop heparin-functionalized gelatin microspheres (HMS) to deliver heparin-binding growth factors particularly for wound-healing applications. The heparin conjugation was carried out using EDC/NHS coupling protocol. Heparin-binding EGF-like growth factor (HB-EGF) was loaded in HMS and its in vitro release behaviour in an environment with or without proteases was studied. The bioactivity of the HB-EGF released from the microspheres was assessed using NIH 3T3 mouse embryonic fibroblast culture. The extent of heparin modification was found to be 1.97 μmol/g of HMS and demonstrated significant protection against enzymatic degradation and sustained release of HB-EGF for more than 10 days. The bioactivity of HB-EGF released from the HMS was retained during the observed release period. The HMS was also found to be non-toxic as determined by calcein AM fluorescent staining. The overall study suggests that the HMS could be used as a growth factor’s delivery component in tissue engineering scaffolds particularly for wound-healing applications.     

High‐pressure microfluidisation pretreatment disaggregate peanut protein isolates to prepare antihypertensive peptide fractions

High‐pressure microfluidisation (HPM) pretreatment was applied to increase in vitro antihypertensive activity of peanut peptide fractions (PPF). The morphology of protein in aqueous dispersion revealed that peanut protein isolate (PPI) disaggregated at relatively low pressure (≤120 MPa) and re‐aggregated at relatively high pressures (150–210 MPa). The treated pressure of 120 MPa could lead to the most disaggregation of PPI. Small peptides contents, trichloroacetic acid‐nitrogen soluble index (TCA‐NSI) and degree of hydrolysis (DH) of peanut protein hydrolysates (PPH) all reached the highest at 120 MPa. Consequently, it possessed the highest angiotensin converting enzyme (ACE) and renin inhibitory activity. The highest surface hydrophobicity occurred at 120 MPa pretreatment samples. Thirty‐nine oligopeptides at 120 MPa pretreatment were identified by ultra‐performance liquid chromatography‐quadrupole time‐of‐flight (UPLC‐Q‐TOF) mass spectrometer combined with Progenesis QI for Proteomics software compared with 29 and 35 at control and 210 MPa, respectively. This meant that disaggregation of PPI at 120 MPa resulted in the release of new hydrophobic peptide.     

Transport phenomena in the electrodeionization of cesium from AMP-PAN

Electrodeionization (EDI) of cesium from cesium-sorbed ammonium molybdophosphate-polyacrylonitrile (AMP-PAN) was investigated by passing eluant through the packed bed of ion-exchange resin in an electrodialysis cell. The deionized cesium from the packed bed was recovered in catholyte by migration and in the eluant by convection. Recovery percentage of Cs by migration increased while the recovery by convection decreased with increase in current density from 20 to 40 mA/cm². Increased eluant concentration resulted in low migration percentage of cesium. Increased catholyte concentration had a negligible effect on total recovery. Apparent diffusion coefficients evaluated using the Nernst–Plank relation increased with increase in current density and catholyte concentration while a decreasing trend was observed with increase in eluant concentration.     

NdFeAsO1−xFx Superconductor – Impact of Fluorine Variation on Microstructure and Transport Properties

Polycrystalline samples of NdFeAsO_1?xF_x (Nd1111) with x = 0, 0.1, 0.2, 0.3, and 0.4 were synthesized using a solid‐state method at ambient pressures. A maximum transition temperature (T_C) of 52.0 K and a J_C of 1050 A/cm² at 12 K were observed for x = 0.3 and 0.4, respectively. The transport and magnetic properties observed for each stoichiometry have remarkable correlation with their corresponding structural and microstructural aspects. Moreover, the superconducting properties exhibited in this material, processed at a relatively low temperature of 1000°C, are competitive as compared to the existing reports wherein high pressures/temperatures are inevitable.     

Strength Recovery in a High-Strength Steel During Multiple Weld Thermal Simulations

BlastAlloy 160 (BA160) is a low-carbon martensitic steel strengthened by copper and M₂C precipitates. Heat-affected zone (HAZ) microstructure evaluation of BA160 exhibited softening in samples subjected to the coarse-grained HAZ thermal simulations of this steel. This softening is partially attributed to dissolution of copper precipitates and metal carbides. After subjecting these coarse-grained HAZs to a second weld thermal cycle below the A _c1 temperature (at which austenite begins to form on heating), recovery of strength was observed. Atom-probe tomography and microhardness analyses correlated this strength recovery to re-precipitation of copper precipitates and metal carbides. A continuum model is proposed to rationalize strengthening and softening in the HAZ regions of BlastAlloy 160.     

Effect of Milling Time on the Microstructure and Thermoelectric Properties of P‐type TAGS‐90 Alloys by HEM and SPS

In this study, p‐type TAGS‐90 powders were fabricated using high‐energy milling (HEM), subsequently sintered by spark plasma sintering (SPS). And then, the effects of milling time on the microstructure, mechanical, and thermoelectric properties were investigated. The powders were quickly decreased to fine particles of ~1 μm in size and uniformly agglomerated with the increasing of milling time. XRD results indicated that all milled powders and SPSed samples showed single GeTe phase. Also, EDX results showed almost no contamination and exact composition after milling. The maximum figure of merit, ZT = 1.08, was obtained for 30‐min‐milled sample at 723 K.     

Effect of Sintering Temperature on Thermoelectric Properties of p‐Bi2Te3 Alloys Produced by Gas Atomization

In this research, p‐type Bi₂Te₃–75% Sb₂Te₃ thermoelectric alloy powders were produced by gas atomization and subsequently sintered by hot pressing at different temperatures. The grain growth of the hot‐pressed samples was observed with increasing sintering temperature from 380°C to 460°C. The compressive strength increased with increasing hot‐pressing temperature due to the high relative density of bulk samples obtained at high temperatures. The effect of sintering temperature on thermoelectric (TE) properties was studied. The maximum power factor 3.48 mW/mK² was obtained for the sample hot pressed at 420°C due to the resulting high electrical conductivity and enhanced Seebeck coefficient values.     

Electrical and Dielectric Properties of Non-magnetic Al<Superscript>3+</Superscript> Substituted Ni–Zn Nano Ferrites for High Frequency Applications

The effect of Al substitution on electrical and dielectric parameters of Ni–Zn ferrite has been discussed in the present work. The phase identification, surface morphology was studied using X-ray diffractometer (XRD), scanning electron microscope (SEM), respectively. The XRD patterns confirm the single-phase formation of these ferrites. With Al³⁺, substitution lattice parameter decreases due to smaller Al³⁺ ions replacing Fe³⁺ ions. The average grain size obtained from SEM results are in the range of 390–27 nm. The DC resistivity was observed to increase with increasing Al³⁺ ions concentration due to the unavailability of Fe³⁺ ions. Dielectric constant (\(\upvarepsilon ^{\prime }\)) and dielectric loss tangent (tan δ) have been studied as a function of frequency (1 kHz–10 MHz) and temperature (50–300 °C). The observed results are explained on the basis of interfacial polarization as predicted by Maxwell and Wagner.     

A Qualitative Review on Tunnel Field Effect Transistor- Operation,Advances, and Applications

Silicon - Tunnel Field Effect Transistor (TFET) has become one of the promising devices to be part of Integrated circuits as the technology advances to the nanoscale. A TFET has many advantages...