Mathematical formulation of provisioning of connections with advance reservation in metro WDM ring networks using reconfigurable OADMs (ROADMs) with tuning constraint

Optical add/drop multiplexers (OADMs) can significantly reduce the cost of metro optical wavelength-division multiplexing (WDM) ring networks by allowing traffic to bypass intermediate nodes without expensive opto-electro-opto (O-E-O) conversion. Some traditional OADMs, called fixed OADMs (FOADMs), can only add/drop traffic on a specific wavelength. Reconfigurable Optical Add/Drop Multiplexers (ROADMs) are emerging, which can add/drop traffic onto/from different wavelengths at different time. ROADMs provide desirable flexibility, enable fast provisioning of dynamic traffic, and save capital expenditure (CapEx) and operational expenditure (OpEx). In order to be cost-effective, some ROADMs employ architectures that tune the ROADM continuously from one wavelength to another, crossing through all the wavelengths in-between, which may cause interference to the connections, if any, on those wavelengths being crossed. In order to prevent existing connections from being interrupted, a constraint needs to be imposed that ROADMs cannot cross working wavelengths when tuning. In this study, the design and the benefits of metro optical WDM network architectures using ROADMs and the impact of this tuning constraint on the performance of the network are investigated. Mathematical formulation of the problem of provisioning of connections with advance reservation, in which the arrival time and departure time of all the connections are known in advance, is presented, and results for a small network are shown.     

PYRENE ENCAPSULATED ALGINATE BEAD TYPE FOR SUSTAINED RELEASE IN BIODEGRADATION: PREPARATION AND CHARACTERISTICS

A novel method for preparation of pyrene encapsulated alginate beads for controlled release delivery of pyrene is reported in this study. Five different bead types that varied on the organic phase for pyrene delivery, presence or absence of polyvinyl alcohol (PVA) and boric acid treatment were prepared. Based on the pyrene release profile, silicone oil encapsulated in PVA-alginate bead was selected where encapsulation efficiency was more than 99% without any solvent leakage. Silicone oil encapsulation was further confirmed in microscopy observations. Pyrene release behavior from the beads was explained by a diffusion controlled first order release (R² > 0.96). Reusability of this bead was demonstrated, where pyrene was loaded from an external medium in a non-destructive way. Application of the system was finally established in a biodegradation study using Mycobacterium frederiksbergense, where simultaneous release and removal of pyrene along with appearance of pyrene metabolites was observed.     

Optimization of flank wear using Zirconia Toughened Alumina (ZTA) cutting tool: Taguchi method and Regression analysis

In this study, Taguchi method and Regression analysis have been applied to assess machinability of AISI 4340 steel with newly developed Zirconia Toughened Alumina (ZTA) ceramic inserts. Several experiments have been carried out based on an orthogonal array L₉ with three parameters (depth of cut feed rate, cutting speed) at three levels (low, medium and high). Based on the mean response and signal to noise ratio (SNR), the best optimal cutting condition has been arrived at A₂B₁C₁ i.e. cutting speed is 280 m/min, depth of cut is 0.5 mm and feed rate is 0.12 mm/rev considering the condition smaller is the better approach. Analysis of Variance (ANOVA) is applied to find out the significance and percentage contribution of each parameter. It has been observed that depth of cut has maximum contribution on tool wear. The mathematical model of flank wear has been developed using regression analysis as a function of the above mentioned independent variables. The predicted value from the developed model and experimental values are found to be very close to each other justifying the significance of the model. A confirmation run has been carried out with 95% confidence level to verify the optimized result and the values obtained are within the prescribed limit.     

A Call-Admission Control (CAC) Algorithm for Providing Guaranteed QoS in Cellular Networks

Future broadband wireless access systems are expected to integrate various classes of mobile terminals (MTs), each class with a different type of quality of service (QoS) requirement. When the load on a wireless network is high, the guarantee of QoS for each class of MTs is a challenging task. This study considers two classes of MTs—profiled MTs and nonprofiled or regular MTs. It is assumed that profiled users require a guaranteed QoS. The measure of QoS is the probability of forced termination of a call that was allowed to access the network. Two previous handoff prioritization schemes—(i) prerequest scheme and (ii) guard channel scheme—decrease handoff failure (and hence forced termination). In this work, we compare and contrast both the schemes through extensive simulation and we find that neither guard channel nor channel prerequest scheme can guarantee a desired level of QoS for the profiled MTs. We then propose a novel call-admission control (CAC) algorithm that can maintain any desired level of QoS, while the successful call completion rate is very high. In the proposed algorithm, the new call arrival rate is estimated continuously, and when the estimated arrival rate is higher than a predetermined level, some new calls are blocked irrespective of the availability of channels. The objective of this new call preblocking is to maintain a cell's observed new call arrival rate at no more than the predetermined rate. We show that the proposed method can guarantee any desired level of QoS for profiled users.     

Macro-to-micro porous special bioactive glass and ceftriaxone-sulbactam composite drug delivery system for treatment of chronic osteomyelitis: an investigation through in vitro and in vivo animal trial

A systematic and extensive approach incorporating in vitro and in vivo experimentation to treat chronic osteomyelitis in animal model were made using antibiotic loaded special bioactive glass porous scaffolds. After thorough characterization for porosity, distribution, surface charge, a novel drug composite were infiltrated by using vacuum infiltration and freeze-drying method which was subsequently analyzed by SEM-EDAX and studied for in vitro drug elution in PBS and SBF. Osteomyelitis in rabbit was induced by inoculation of Staphylococcus aureus and optimum drug-scaffold were checked for its efficacy over control and parenteral treated animals in terms of histopathology, radiology, in vivo drug concentration in bone and serum and implant-bone interface by SEM. It was optimized that 60P samples with 60-65% porosity (bimodal distribution of macro- to micropore) with average pore size ~60 μm and higher interconnectivity, moderately high antibiotic adsorption efficiency (~49%) was ideal. Results after 42 days showed antibiotic released higher than MIC against S. aureus compared to parenteral treatment (2 injections a day for 6 weeks). In vivo drug pharmacokinetics and SEM on bone-defect interface proved superiority of CFS loaded porous bioactive glass implants over parenteral group based on infection eradication and new bone formation.     

Provisioning of dynamic traffic in mixed-line-rate optical networks with launch power determination

In mixed-line-rate (MLR) networks, different line rates on different wavelengths can coexist on the same fiber. MLR architectures can be built over transparent optical networks, where the transmitted signals remain in the optical domain along the entire path. Along the transparent optical path, a signal experiences various physical layer impairments (PLIs), and its quality degrades as it travels through each optical component. One of the major factors that affect the transmission quality is the launch power of the optical signal. The power must be large enough to ensure noise resiliency at the receiver, but it must be below the limit where fiber nonlinearities distort the signal. Moreover, high launch power is disruptive not only for the actual lightpath itself but also for neighboring lightpaths, and this effect is particularly critical in MLR networks since advanced modulation techniques used for high line rates are highly susceptible to PLIs. In this study, we investigate the problem of determining the appropriate launch power for provisioning of dynamic connection requests in MLR networks. By setting the appropriate launch power for each connection, we aim to maximize the number of established connections. We propose two different heuristics to determine the appropriate launch power of a lightpath. Worst-case best-case average (WBA) is based on optical reach of signal in a transparent optical network. In impairment-aware launch power determination (I-ALPD), current state of the network and impairments are evaluated to determine the launch power. The proposed approaches are practical and can adapt to the needs of network operators. Simulation results show that the performances of the proposed approaches show better results than the existing schemes in terms of blocking probability and bandwidth blocking ratio.     

Software-defined optical networks (SDONs): a survey

This paper gives an overview of software-defined optical networks (SDONs). It explains the general concepts on software-defined networks (SDNs), their relationship with network function virtualization, and also about OpenFlow, which is a pioneer protocol for SDNs. It then explains the benefits and challenges of extending SDNs to multilayer optical networks, including flexible grid and elastic optical networks, and how it compares to generalized multi-protocol label switching for implementing a unified control plane. An overview on the industry and research efforts on SDON standardization and implementation is given next, to bring the reader up to speed with the current state of the art in this field. Finally, the paper outlines the benefits achieved by SDONs for network operators, and also some of the important and relevant research problems that need to be addressed.     

Disaster-aware service provisioning with manycasting in cloud networks

Cloud services delivered by high-capacity optical datacenter networks are subject to disasters which may cause large-area failures, leading to huge data loss. Survivable service provisioning is crucial to minimize the effects of network/datacenter failures and maintain critical services in case of a disaster. We propose a novel disaster-aware service-provisioning scheme that multiplexes service over multiple paths destined to multiple servers/datacenters with manycasting. Our scheme maintains some bandwidth (i.e., degraded service) after a disaster failure vs. no service at all. We formulate this problem into a mathematical model which turns out to be an Integer Linear Program (ILP), and we provide heuristic optimization approaches as ILP is intractable for large problem instances. Numerical examples show that exploiting manycasting by intelligently selecting destinations in a risk-aware manner for service provisioning offers high level of survivability against link and node failures that may be caused by disasters and post-disaster failures at no extra cost compared to the other survivable schemes.     

Chemical structure of coal macerals in Balmer 10 coal and fusinite from Illinois coal as indicated by reductive alkylation

A Canadian Cretaceous coking coal from the Balmer 10 seam, Fernie, British Columbia, was separated by sink-and-float methods into vitrinite and a semifusinite-rich fraction. A portion of the vitrinite fraction was oxidized in air at 100 °C for 72 h to destroy the coking properties. The fresh vitrinite, oxidized vitrinite, and semifusinite of the Balmer coal, and the fusinite from Illinois coal, were each subjected to the reductive alkylation procedure of Sternberg, to cleave the ether linkages and octylate the products. The oxygen functional groups before and after ether cleavage were determined, as were the extractabilities by benzene of the octylated products. Thus the molecular weights of the benzenesoluble fractions of the octylated cleavage products were: fresh vitrinite 1930, oxidized vitrinite 1830, and fusinite 1490. The molecular-weight distribution of the octylated cleavage products was estimated by volatility analysis, which demonstrated the presence of much lower-molecular-weight material. Dilatation analysis of fresh and oxidized vitrinite showed that after cleavage of the ether linkages with potassium in tetrahydrofuran, the two could be brought to the same state. The dilatation behaviour of semifusinite after cleavage of the ether links and octylation showed only contraction, whereas the oxidized vitrinite treated in a similar manner exhibited a large dilatation.     

Cefuroxime-impregnated calcium phosphates as an implantable delivery system in experimental osteomyelitis

The study aimed to investigate the effectiveness of porous calcium phosphates viz., hydroxyapatite (HAp) and a bi-phasic calcium phosphate (BCP) with predominately β-tricalcium phosphate (β-TCP) prepared by aqueous solution combustion method impregnated with cefuroxime axetil for the treatment of experimental osteomyelitis and compared with parenteral treatment. In vitro release of the drug was tested for its sustained elution characteristics for 21 days in PBS (pH 7.2) and measured by HPLC. In the in vivo study, bone infection was induced in tibia of rabbits by inoculation of 1 ml (3 × 10⁶) CFU Staphylococcus aureus. On the 21st day, after the development of osteomyelitis, six animals were treated by filling the cavity with cefuroxime-impregnated HAp blocks (Group II), six animals with the same drug-impregnated β-TCP (Group III) and in six others, only cefuroxime (15 mg/kg twice daily) was injected parenterally 6 weeks (Group IV). Group I with six animals was kept untreated. Histologically, the signs of infection were found to subside by 3 and 6 weeks. Radiological evaluation with cefuroxime-impregnated HAp and β-TCP pointed out the disappearance of sequestrum and existence of newly formed bony specules. Concentration of cefuroxime in bone and serum as estimated by HPLC showed highest value on day 21 itself which reduced marginally by day 42 in both the groups and these values were higher than minimum inhibitory concentration (MIC) against S. aureus. Our findings suggest that bi-phasic calcium phosphates with predominately β-TCP content is a very efficient carrier material for antibiotic compounds even for refractory infections by S. aureus.