Reduction of hexavalent chromium by Bacillus sp. isolated from chromite mine soils and characterization of reduced product

BACKGROUND: The reduction of highly mobile and toxic hexavalent chromium by bacterial strains is considered to be a viable alternative to reduce Cr(VI) contamination, in soils and water bodies, emanating from the overburden dumps of chromite ores and mine drainage. The present study reports the isolation of Cr(VI) resistant bacterial strains from an Indian chromite mine soil and their potential use in reduction of hexavalent chromium. RESULTS: Among the isolates, a bacterial strain (CSB‐4) was identified as Bacillus sp. based on standard biochemical tests and partial 16SrRNA gene sequencing, which was tolerant to as high as 2000 mg L^?1 Cr(VI) concentration. The strain was capable of reducing Cr(VI) to Cr(III) in different growth media. Under the optimized conditions pH ～7.0, 100 mg L^?1 Cr(VI), 35 °C temperature and stirring speed 100 rpm, CSB‐4 reduced more than 90% of Cr(VI) in 144 h. The time course reduction data fitted well an exponential rate equation yielding rate constants in the range 3.22 × 10^?2 to 6.5 × 10^?3 h^?1 for Cr(VI) concentration of 10–500 mg L^?1. The activation energy derived from temperature dependence rate constants between 25 and 35 °C was found to be 99 kJ mol^?1. The characterization of reduced product associated with bacterial cells by SEM‐EDS, FT‐IR and XRD was also reported. CONCLUSION: Reasonably high tolerance and reduction ability of indigenous Bacillus sp. (CSB‐4) for Cr(VI) under a wide range of experimental conditions show promise for its possible use in reclamation of chromite ore mine areas including soils and water bodies. Copyright © 2010 Society of Chemical Industry     

Energy reduction schemes for multiple effect evaporator systems

In the present work different energy reduction schemes (ERSs), used to reduce the consumption of steam for a multiple effect evaporator (MEE) system, are developed. These ERSs are condensate-, feed- and product-flashing and vapor bleeding. Further, a new scheme is proposed where condensate of vapor chest of an effect is used to preheat the liquor, which is entering into that effect using a counter current heat exchanger. This work also presents a comparative study between existing ERSs and selects the best ERS amongst these based on steam consumption as well as number of units involved. Further, in the present paper a simple graphical approach named “modified temperature path (MTP)” is developed for the analysis of different feed flow sequences of a MEE system to screen best possible feed flow sequence. To study the effect of different ERSs on steam consumption and MTP analysis an example of septuple effect flat falling film evaporator (SEFFFE) system, employed for concentrating weak black liquor in an Indian Kraft Paper Mill, is considered. The results show that ERSs reduce the steam consumption up to 24.6%.     

Continuous cooling transformation diagrams applicable to the heat-affected zone of HSLA-80 and HSLA-100 steels

Continuous cooling transformation (CCT) diagrams for HSLA-80 and HSLA-100 steels pertaining to fusion welding with heat inputs of 10 to 40 kJ/cm, and peak temperatures of 1000 °C to 1400 °C have been developed. The corresponding nonlinear cooling profiles and related γ → α phase transformation start and finish temperatures for various peak temperature conditions have been taken into account. The martensite start (M _s ) temperature for each of the grades and ambient temperature microstructures were considered for mapping the CCT diagrams. The austenite condition and cooling rate are found to influence the phase transformation temperatures, transformation kinetics, and morphology of the transformed products. In the fine-grain heat-affected zone (FGHAZ) of HSLA-80 steel, the transformation during cooling begins at temperatures of 550 °C to 560 °C, and in the HSLA-100 steel at 470 °C to 490 °C. In comparison, the transformation temperature is lower by 120 °C and 30 °C in the coarse-grain heat-affected zone (CGHAZ) of HSLA-80 steel and HSLA-100 steel, respectively. At these temperatures, acicular ferrite (AF) and lath martensite (LM) phases are formed. While the FGHAZ contains a greater proportion of acicular ferrite, the CGHAZ has a higher volume fraction of LM. Cooling profiles from the same peak temperature influence the transformation kinetics with slower cooling rates producing a higher volume fraction of acicular ferrite at the expense of LM. The CCT diagrams produced can predict the microstructure of the entire HAZ and have overcome the limitations of the conventional CCT diagrams, primarily with respect to the CGHAZ.     

Phase-field investigation of multicomponent diffusion in single-phase and two-phase diffusion couples

Interdiffusion in hypothetical ternary single-phase and two-phase diffusion couples are examined using a phase-field model by numerically solving the nonlinear Cahn-Hilliard and Ginzburg-Landau equations. For diffusion couples assembled with a regular single-phase solution, constant chemical mobilities were used to examine the development of concentration profiles including uphill diffusion and zero-flux plane. Zero-flux plane for a component was observed to develop for a diffusion couple at the composition that corresponds to the activity of that component in one of the terminal alloys. Experimental thermodynamic parameters and composition-dependent chemical mobilities were used to examine the morphological evolution of the interphase boundary in solid-to-solid, two-phase diffusion couples. Instability at the interphase boundary was introduced initially (t=0) by a small compositional fluctuation at the diffuse interface, and its evolution varied largely as a function of terminal alloys and related composition-dependent chemical mobility. This article was presented at the Multicomponent-Multiphase Diffusion Symposium in Honor of Mysore A. Dayananda, which was held during TMS 2006, the 135th Annual Meeting and Exhibition, March 12–16, 2006, in San Antonio, TX. The symposium was organized by Yongho Sohn of University of Central Florida, Carelyn E. Campbell of National Institute of Standards and Technology, Richard D. Sisson, Jr., of Worcester Polytechnic Institute, and John E. Morral of Ohio State University.     

Autonomous navigation for high altitude satellites

The determination of the orbit of high altitude satellites with an accurate horizontal charge coupled device (CCD) sensor is considered using the extended Kalman filter. The measurement nonlinearity is removed by using a coordinate transform, and the corresponding steady state error is less than the steady state error in the Cartesian coordinate system. The performance of both of the navigational filters is evaluated for a reference geosynchronous orbit as a function of measurement error. The reduction of measurement uncertainty decreased steady state errors in position and velocity.     

Mass classification method in mammograms using correlated association rule mining

In this paper, we present an efficient computer-aided mass classification method in digitized mammograms using Association rule mining, which performs benign–malignant classification on region of interest that contains mass. One of the major mammographic characteristics for mass classification is texture. Association rule mining (ARM) exploits this important factor to classify the mass into benign or malignant. The statistical textural features used in characterizing the masses are mean, standard deviation, entropy, skewness, kurtosis and uniformity. The main aim of the method is to increase the effectiveness and efficiency of the classification process in an objective manner to reduce the numbers of false-positive of malignancies. Correlated association rule mining was proposed for classifying the marked regions into benign and malignant and 98.6% sensitivity and 97.4% specificity is achieved that is very much promising compare to the radiologist’s sensitivity 75%.