Robust partial pole assignment problem for high order control systems

In this paper, we consider the partial pole assignment problem (PPAP) for high order control systems. It is shown that solving the PPAP is essentially solving a pole assignment for a linear system of a much lower order, and the robust PPAP is then concerning the robust pole assignment problem for this linear system. Based on this theory, a rather simple algorithm for solving the robust PPAP is proposed, and numerical examples show that this algorithm does lead to comparable results with earlier algorithms, but at much lower computational cost.     

数字化电气信息采集对继电保护可靠性的影响

数字化电气信息采集为数字化变电站乃至智能电网信息化提供直接支撑.针对电子式互感器和合并单元的特点,给出数字化电气信息采集系统的功能模块.从互感器结构、数字传输、数据验证、采样频率和系统配置方面,分析数字化电气信息采集对继电保护可靠性的影响,着重说明了数据同步对差动保护的影响.指出由于存在电子式互感器的稳定性以及网络通讯可依赖性问题,目前数字化变电站继电保护系统在很大程度上仍沿用传统保护的设计思路,有待进行深入研究和突破.     

Accurate mirror-based camera pose estimation with explicit geometric meanings

An accurate closed form solution is proposed to estimate camera pose by several mirrored reference object images acquired via a planar mirror under different unknown poses. Compared with state-of-the-art methods, our method is more accurate when there are more than three images and has explicit geometric meanings. This method also properly handles cases in which some of the mirror poses are parallel. The central idea is to minimize an error metric based on all reflections of rotation, which enables the camera rotation to be estimated directly by SVD of sum of mirrored camera rotations. After that, the camera translation is computed by solving a large system of linear equations to minimize object space collinearity error. Both synthesized data and real data experiments show the advantages of our approach.     

全站仪进行跨海面高程测量的应用及验证

海面高程的传递是水准测量中的难题.以宁波市象山县某围堤工程变形测量为例,对全站仪进行跨海面高程测量进行了成功应用,并用GPS拟合高程测量方法和平均海平面法进行了验证,结果合理.     

玻璃中离子注入的进展

玻璃中离子注入的进展王承遇，王波，陶瑛（大连轻工业学院玻璃及无机新材料研究所１１６００１）ＴｈｅＤｅｖｅｌｏｐｍｅｎｔｏｆＩｏｎ－ＩｍｐｌａｎｔｉｏｎｉｎＧ１ａｓｓｅｓ￥ＷａｎｇＣｈｅｎｇｙｕ；ＷａｎｇＢｏ；ＴａｏＹｉｎｇ（ＩｎｓｔｉｔｕｔｅｏｆＧｌ...     

Preparation of BaTiO3-Based Nonreducible X7R Dielectric Materials Via Nanometer Powders Doping

Nonreducible X7R dielectric materials, which can be cofired with Ni electrode, were obtained by doping nanometer additives to BaTiO₃ powders synthesized by employing a sol-gel method. The crystallization process, structure and constituent of nanometer additives, as well as morphologies were studied via differential thermal and thermogravimetric analyses (DTA/TG), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The effects of the calcining temperature of dopants on the dielectric properties were also discussed. The experiment results proved that higher-performance X7R dielectric materials could be obtained via nanometer doping compared with conventional doping. At room temperature, dielectric constant is more than 3000; dielectric loss lower than 1.0% and insulation resistance more than 10¹¹Ω ⋅cm.     

Machinability of Metal Matrix Composites Reinforced by 3-D Network Structure

Metal matrix composites reinforced by three-dimensional (3-D) continuous network structure reinforcement (3DCNRMMC) are difficult to machine due to serious tool wear and poor surface roughness caused by the brittle and hard reinforcement which interpenetrate into ductile matrix. In order to achieve the approach of low cost of 3DCNRMMC, the machinability of it needs to be understood. The influences of three cutting parameters and volume fraction of reinforcement on cutting force were analyzed in detail. The results indicate that: (1) Due to the brittle phase(s) introduced into ductile matrix of composites, there is a large fluctuation of cutting force causing deterioration of machinability. The fluctuation ranges of cutting forces, initially increase rapidly with the increase of volume fraction of reinforcement and then decrease finally, are largest at the range of the volume fraction of 55–65%; (2) The influence of cutting parameters on cutting force is obvious. With the increases of cutting speed, cutting force decreases gradually unless cutting speed exceeds the value of 209 m/min. Cutting forces increase with increasing feed rate and depth of cut; (3) Owing to the large fluctuation of cutting force, there were some cratered surfaces caused by Si₃N₄ reinforcement pulling-out and flaking-off. Some brittle phase protruding from the machined surface caused the deterioration of machined surface.     

超细片状铝粉和铝银浆的制备

超细鳞片状铝粉和铝银浆由于其特殊的二维平面结构，具有良好的遮盖力、显著的屏蔽效应、光学反射能力；超细鳞片状铝粉和铝银浆颜料的制备方法很多，本文采用机械化学法制备超细鳞片状铝粉和铝银浆。     

多元回归分析在电热式平板硫化机热板温度场中的应用

分析电热平板硫化机热板温差大的主要影响因素,重点研究热源分布情况对温差的影响.以400×400电热平板硫化机为例,应用多元回归的二次响应曲面模型及其子模型,对热源间距(电热管间距)与热板表面最大温差之间的函数关系进行预测,检验并分析预测结果(拟合曲线)的可靠程度,从而得出较合理的数学模型,即完整二次响应曲面模型.此模型可为工程设计提供参考依据.     

A 3-GHz 70-mb SRAM in 65-nm CMOS technology with integrated column-based dynamic power supply

Column-based dynamic power supply has been integrated into a high-frequency 70-Mb SRAM design that is fabricated on a high-performance 65-nm CMOS technology. The fully synchronized design achieves a 3-GHz operating frequency at 1.1-V power supply. The power supply at SRAM cell array is dynamically switched between two different voltage levels during READ and WRITE operations. Silicon measurement has proven this method to be effective in achieving both good cell READ and WRITE margins, while lowering the overall SRAM leakage power consumption.