Automated synthesis of multiple analog circuits using evolutionary computation for redundancy-based fault-tolerance

Analog circuits are one of the most important parts of modern electronic systems and the failure of electronic hardware presents a critical threat to the completion of modern aircraft, spacecraft, and robot missions. Compared to digital circuits, designing fault-tolerant analog circuits is a difficult and knowledge-intensive task. A simple but powerful method for robustness is a redundancy approach to use multiple circuits instead of single one. For example, if component failures occur, other redundant components can replace the functions of broken parts and the system can still work. However, there are several research issues to make the redundant system automatically. In this paper, we used evolutionary computation to generate multiple analog circuits automatically and then we combined the solutions to generate robust outputs. Evolutionary computation is a natural way to produce multiple redundant solutions because it is a population-based search. Experimental results on the evolution of the low-pass, high-pass and band-stop filters show that the combination of multiple evolved analog circuits produces results that are more robust than those of the best single circuit.     

Digital parallelism, perpendicularity, and rectangles

The slope of digital line segments is defined and an algorithm to evaluate it is presented. Parallelism and perpendicularity of two digital line segments are also defined. Finally, rectangular digital regions are defined and characterized, and an algorithm that determines whether or not a given digital region is a digital rectangle is presented.     

Enantioselectivities of Chiral Ti(IV) Salen Complexes Immobilized on MCM-41 in Asymmetric Trimethylsilylcyanation of Benzaldehyde

A new heterogeneous system for catalytic trimethylsilylcyanation of benzaldehyde has been developed by immobilizing Ti(IV) salen onto ordered mesoporous silica (MCM-41). The immobilization was performed according to different methods: (i) direct condensation of silanol on the silica surface with Ti(IV) salen and (ii) multigrafting of salicylaldehyde derivatives and diaminocyclohexane using 3-mercaptopropyl-functionalized MCM-41 as a starting material. The heterogenized salen catalysts showed a high enantioselectivity for the addition of trimethylsilyl cyanide to benzaldehyde.     

Poly(butylene terephthalate)/organoclay nanocomposites prepared by in situ interlayer polymerization and its fiber (II)

Intercalated nanocomposites with poly(butylene terephthalate) (PBT) incorporated between the montmorillonite layers were synthesized from dimethyl terephthalate and 1,4-butane diol by using an in situ interlayer polymerization. The PBT nanocomposites were melt-spun at different organoclay contents to produce monofilaments. The samples were characterized by using wide angle X-ray diffraction, electron microscopy, thermal analysis, and tensile testing. The extent of the clay layer in the PBT was confirmed by using X-ray diffraction and electron microscopy, and the clay layer was found to be highly dispersed on a nanometer scale. The addition of only a small amount of organoclay was enough to improve the thermo-mechanical properties of the PBT hybrid fibers. The hybrids were extruded with various draw ratios (DRs) to examine the tensile mechanical property of the fibers. At DR=1, the ultimate tensile strength of the hybrid fibers increased with the addition of clay up to a critical content and then decreased. However, the initial modulus monotonically increased with increasing amount of organoclay in the PBT matrix. When the DR was increased from 1 to 6, for example, the strength and the initial modulus values of the hybrids containing 3 wt% organoclay decreased linearly.     

Microstructural Evolution of Gas-Pressure-Sintered Si3N4 with Yb2O3 as a Sintering Aid

Microstructural evolution of gas-pressure-sintered Si₃N₄ with Yb₂O₃ as a sintering aid was observed. Microstructures typical for in situ toughened Si₃N₄, i.e., large elongated grains randomly distributed in a fine matrix, were observed. However, the size of the elongated grains near the surface was much larger than that at the center, resulting in two distinct regions: an inner region and an outer region. The smaller the amount of Yb₂O₃ added, the larger the difference in the size of the elongated grains between the outer and inner regions. The difference between microstructures was diminished when 16 wt% Yb₂O₃ was added. The microstructural change with Yb₂O₃ content was attributed to the evaporation of Yb-containing liquid phase from the surface.     

A power-efficient vertical handover with MIH-based network scanning through consistency check

We propose an power-efficient scanning scheme considering the consistency of the Information Element (IE) for the Media Independent Handover (MIH) based Vertical Handover. Since the Green IT is one of the key issues of the science, we suggested the power saving scheme by extending the information and the event service of the MIH framework to reduce the number of full scanning. We proposed the criteria to select the update MT to quantify the power consumption alongside various network scanning methods. Since the frequent and multiple network scanning incurred by small mobile terminals (MT) is considerable, the scanning avoidance is essential for the framework we suggest. The MIH Information Service (MIIS) provides many usable factors and features for the scanning avoidance. However, because of the absence of the criteria to select the update node, these values are not actually usable. Therefore, we suggest an Energy Efficient Function, which tests the validity of MIIS values and makes a decision on whether to avoid the scanning or not.     

Hydrodynamic characteristics of a FCC regenerator

The hydrodynamic and gas mixing characteristics have been determined in a FCC regenerator (0.48 m I.D.x3.4 m high) with FCC particles. Solids holdup in the dense bed decreases with increasing gas velocity, but it increases in the freeboard region. The bubble/void fraction increases with an increase along the bed height at a given gas velocity and increases with increasing gas velocity at a constant bed height. Backmixed tracer gas at the wall region is higher than that at the center region of the bed. The gas backmixing coefficient decreases with increasing gas velocity.     

Blends of chlorinated isotactic polypropylene with poly(ethylene-co-vinyl acetate) I. Effect of component polymers composition on the blend miscibility

Chlorinated isotactic polypropylenes (CPP) having various chlorine contents were blended with poly(ethylene-co-vinyl acetate)s (EVA) having various vinyl acetate (VA) contents. The blends were made by casting films from dilute THF solutions and miscibility of the blends was identified by single glass transition temperature, which was confirmed by DSC and dynamic mechanical measurements. Based on the miscibility data from a large number of CPP/EVA combinations, a miscibility map was depicted where CO equivalent weight (CO-EQW) of EVA was plotted against chlorine equivalent weight (Cl-EQW) of CPP. Though an attractive interaction between CPP and EVA could be detected in all the miscible and immiscible blend pairs, miscibility of the CPP/EVA blends could solely be observed in a relatively narrow range of Cl-EQW ca. 65–100 and CO-EQW ca. 170–230.     

Effect of Twin-Plane Reentrant Edge on the Coarsening Behavior of Barium Titanate Grains

When BaTiO₃ ceramics were sintered at relatively low temperatures (≤1250°C), the grains with reentrant edges caused by a (111) double twin grew exclusively. As a result, a microstructure with a bimodal grain-size distribution composed of platelike large grains and fine matrix grains was obtained. In contrast, at the usual sintering temperature between 1250° and 1350°C, grains containing a (111) double twin did not exhibit any growth advantage. In this case, a coarse and uniform microstructure was obtained. When this coarse-grained specimen was further heat-treated at 1365°C, the grains possessing a double twin were observed to grow exclusively again. The results were explained in terms of a coarsening process controlled by two-dimensional nucleation.     

Face detection based on skin color likelihood

We propose a face detection method based on skin color likelihood via a boosting algorithm which emphasizes skin color information while deemphasizing non-skin color information. A stochastic model is adapted to compute the similarity between a color region and the skin color. Both Haar-like features and Local Binary Pattern (LBP) features are utilized to build a cascaded classifier. The boosted classifier is implemented based on skin color emphasis to localize the face region from a color image. Based on our experiments, the proposed method shows good tolerance to face pose variation and complex background with significant improvements over classical boosting-based classifiers in terms of total error rate performance.