Fractionation studies of palm oil by density gradient

The paper describes a method of fractionating vegetable, animal and fish oils, and in particular palm oil. The method involves addition of a medium comprising two common solvents to the semisolid oils. On centrifugation, the olein and stearin are separated by the medium in the middle. Thirteen media made up from binary combinations of nine solvents, viz. water, propylene glycol, glycerine, methanol, ethanol,n-propanol, isopropanol (IPA), acetone and butanone, are found to be effective in olein-stearin separation. However, only the water/IPA and water/methanol systems have been studied in detail. The aqueous IPA provides a higher yield of olein than water/ methanol but intersolubility between oil and medium is also greater. The fractionation process can be carried out at any suitable temperature. Fractionation of the special prime bleached (SPB) palm oil at 16 C yields an olein with a cloud point of 4.8 C. Some hybrid palm oils produce a large quantity of low cloud point olein which can be bleached readily. The process can be extended to include degumming and neutralization by using an alkaline medium for centrifugation. The olein fractions obtained have been found to be free of phosphatides and the free fatty acids reduced to as low as 0.02%. Metal-scavenging agents have also been added to the medium in an attempt to remove copper and iron. The development of this process into a continuous one has been demonstrated on the AlfaLaval LAPX 202 Separator. Fractionation of crude palm oil using a density gradient provides seven fractions of different characteristics. The iodine values vary from 37.5 to 57.4 and the unsaturated fatty acids range from 32.7% to 51.2%. Triglyceride analysis by carbon numbers shows great differences in the C₄₈ and C₅₂ constituents of the fractions. aThe volume ratio of oil to medium in each case was 1:1. The separation involved the oil and wax.     

Object illumination angle measurement in speckle interferometry

Errors in measurement of the object illumination angle affect fringe interpretation accuracies in speckle interferometry. To measure the object illumination angle we propose a method based on the moiré effect. The technique is easy to implement and was found to yield fast and accurate measurements.     

White-light reconstruction setup for shearograms using optical-fiber waveguides

A white-light reconstruction setup for shearograms using optical-fiber waveguides is presented. The setup is compact, is not susceptible to dust and scratches, and enables the two-dimensional fringe pattern on shearograms to be viewed directly under uniform and enhanced illumination with minimal image distortion.     

Anatomically constrained electrical impedance tomography for anisotropic bodies via a two-step approach

Discusses the inclusion of anatomical constraints and anisotropy in static Electrical Impedance Tomography (EIT) using a two-step approach to EIT. In the first step, the boundaries between regions of different conductivities are anatomically constrained using Magnetic Resonance Imaging (MRI) data. In the second step, the conductivity values in different regions are determined. Anisotropic conductivity regions are included to allow better modeling of the muscle regions (e.g., skeletal muscle) which exhibit a greater conductivity in the direction parallel to the muscle fiber. This two-step approach is used to reconstruct the conductivity profile of a canine torso, illustrating its potential application in extracting conductivity values for bioelectric modeling.     

Development of a web-based insulin decision aid for the elderly: usability barriers and guidelines

Universal Access in the Information Society - In recent years, researchers have attempted to shift patient decision aids (PDAs) from paper-based to web-based to increase its accessibility. Insulin...     

Note: A method to isolate and detect a large number of single molecules by microdroplet fluorescence spectroscopy

A laser induced fluorescence system, in combination with a glass-frit nebulizer and a photo-voltaic cell detector, is described for single molecule detection. The glass-frit nebulizer continuously generates a large number of droplets with an average droplet size of three micrometers in diameter. Rhodamine 6G molecules were detected at the 10(-12) M level. Concentrations 10(-12)-10(-10) M would provide mostly single molecules (0, 1, 2, 3, ...) in the individual droplets, as determined by Poisson distribution.     

Microstructure evolution of the Sn–Ag–y%Cu interconnect

The lead free Sn–Ag–y%Cu (y = 0.0, 0.5, 1.0 and 2.0) interconnect interfacial microstructures and the microstructure evolution under thermal treatment (isothermal aging, 150 °C/1000 h) were studied in detail by using surface microetching microscopy and cross section microscopy. The corresponding mechanical and reliability behaviors were evaluated by performing shear test and fracture mode analysis before and after the thermal treatment. The results indicate: (i) The interconnects could have different microstructures and intermetallic compound (IMC), depending on the Cu content. The Cu–Sn IMC could have microstructures that were clusters or protrusion-like, Augustine grass leaf-like, scissor-like, tweezers-like, etc. (ii) Ag₃Sn IMCs were not observed at time zero for any interconnect groups, but they occurred after the aging for all groups. The Ag₃Sn IMC could have different microstructures, again depending on Cu content. For low Cu content, the Ag₃Sn IMCs were granules or nodules; for higher Cu content, Ag₃Sn IMCs were plate-like. (iii) The growth of Ag₃Sn plates was promoted by the growth of Cu–Sn IMCs, but indirectly linked to the Cu content. (iv) High Cu content (1.0 wt% and higher) could degrade the mechanical and reliability performances of the LF interconnect by providing a brittle joint, which was mainly achieved through the substantial growth of Cu–Sn IMCs and Ag₃Sn plates.