Effect of blanching and drying treatments on quality of bamboo shoot slices

The enzymes activity, texture, pectin, microstructure and colour change in bamboo shoots (Dendrocalamus latiflorus) were examined to evaluate the effect of blanching and drying treatments on quality of bamboo shoot slices (BSS). Peroxidase (POD), phenylalanine ammonia‐lyase and polyphenol oxidase in BSS will become completely inactive at 95 °C for 6‐, 9‐ and 12‐min blanching treatments, respectively. The hardness and protopectin (PP) content decreased after the blanching treatment. Meanwhile, the content of water‐soluble pectin increased initially and then decreased gradually during the blanching. After the blanching treatment, the L* and a* of BSS decreased, while b* increased, ΔE > 2. The hardness of rehydrated BSS decreased by 43.57% after freeze drying (FD), which, however, decreased more after hot air drying (HAD). The pectin of rehydrated BSS was also determined to explain the hardness change in BSS. The BSS acquired similar microstructure of fresh samples after FD, while microstructure of BSS was severely damaged after HAD. The colour of BSS changes significantly after drying treatment. However, FD can maintain better colour of BSS than HAD. The results may provide a reference for industrial production of BSS.     

Uncooled InAs0.09Sb0.91 photoconductors with cutoff wave- length extended to 11.5 μm

Uncooled InAsSb photoconductors were fabricated. The photoconductors were based on InAs0.05Sb0.95 and InAs0.09Sb0.91 thick epilayers grown on InAs substrates by melt epitaxy (ME). Ge immersion lenses were set on the photoconductors. The cutoff wavelength of InAs0.09Sb0.91 detectors is obviously extended to 11.5 mm, and that of InAs0.05Sb0.95 detectors is 8.3 mm. At room temperature, the peak detectivity of Dλp at wavelength of 6.8 mm and modulation frequency of 1 200 Hz is 1.08×109 cm.Hz1/2.W-1 for InAs0.09Sb0.91 photoconductors, the detectivity D at wavelength of 9 mm is 7.56×108 cm.Hz1/2.W-1, and that at 11 mm is 3.92×108 cm.Hz1/2.W-1. The detectivity of InAs0.09Sb0.91 detectors at the wavelengths longer than 9 mm is about one order of magnitude higher than that of InAs0.05Sb0.95 detectors, which rises from the increase of arsenic (As) composition in InAs0.09Sb0.91 materials.     

基于频域分析的无拍频控制策略离散化方法

交直交供电模式的动车组牵引系统中,单相脉冲整流器的特性使得直流侧存在2倍频脉动分量。该脉动分量使得电机的转矩和电流均存在脉动,即拍频现象。传统方法通过硬件LC滤波器抑制直流电压脉动,该方法降低了交流器的功率密度并且增加了成本。本文首先对拍频现象做了分析,提出适用于转子磁场定向矢量控制系统的无拍频控制策略。控制器在数字系统中的控制性能依赖于离散化方法,本文对采用后向欧拉离散的传统脉动电压采样进行了优化以准确获得脉动分量,然后用八种离散化方法分别对本文控制器进行离散化处理,从离散精度、控制性能和数字实现难易程度进行了详细对比,得到针对本文控制器的最优离散化方法,最后对本文所提方法进行了仿真和实验验证。     

Preparation and IVIVC evaluation of salvianolic acid B micro-porous osmotic pump pellets

Purpose: Salvianolic acid B micro-porous osmotic pump controlled release pellets (SalB-CRPs) with suitable in vitro release profiles and good in vitro and in vivo correlation (IVIVC) were developed.

Method: Extrusion-spheronization was used to prepare the starter cores containing SalB/MCC/Kollidon®CL-SF/Flowlac®100 of 30:40:15:15 [w/w, The formulation composition of SalB immediate-release pellets (SalB-IRPs)] and complexed with lactose. The pellets were subsequently coated with Surelease aqueous dispersion to achieve controlled-release properties. Furthermore, a single-dose pharmacokinetics study was carried out in New Zealand White (NZW) rabbits.

Results: In the starter cores, the lactose content was 25% based on the SalB-IRPs constituent. The optimal coating polymer ratio of Surelease aqueous dispersion and polyvinyl alcohol–polyethylene glycol (PVA–PEG) graft copolymer (EC/PVA–PEG) was found to be 70:30 (w/w, %) with a coating weight of 5%. The prepared SalB-CRPs had similar in vitro release under three different pH release mediums. A good IVIVC was characterized by a high coefficient of determination (r?=?0.9801). The in vivo study indicated that the maximum plasma concentration (C_max) of SalB-CRPs was decreased, peak concentration time (T_max) and mean residence time (MRT) were all prolonged, as that of SalB-IRPs. In addition, the area under concentration–time curve from 0 to 24?h (AUC_0–24?h) and 0 to infinity (AUC_0–∞) were significantly higher, compared with those of SalB-IRPs.

Conclusion: Collectively, these results manifested that SalB-CRPs were likely to be a more suitable formulation in treating cardiovascular disease with improved in vivo retention, decreased plasma drug concentration fluctuation.     

混合填充式回热器单级脉管制冷机性能研究

回热器为回热式低温制冷机的关键部件,其性能对系统的影响甚大。为探索回热器内金属丝网混合填充对回热器性能的影响,文章基于回热器模拟软件REGEN3.3仿真结果的基础上,制作了单级脉管制冷装置,采用#300SS,#400SS和#500SS的金属丝网混填了四组回热器,并在不同输入功率下进行了系统制冷性能实验。实验结果表明,较之低目数丝网填充的回热器制冷机,采用高目数丝网填充的回热器制冷机性能较优;在回热器热端填充低目数,冷端填充高目数的丝网,可提高回热器冷端压比,提高整机制冷性能。     

基于交互行为的在线社会网络水军检测方法

网络水军对广告、谣言、木马和恶意链接进行传播,不仅干扰用户对在线社会网络的正常访问,还可能引发网络安全、社会稳定等方面的问题。针对网络水军信息传播的特点,提出基于交互行为的信息传播模型。模型根据不同传播主体间的交互定义特征来量化传播行为,使用决策树方法对水军传播的信息进行检测。通过新浪微博的真实数据分析传播模型并验证检测方法,结果表明检测方法能够对微博中水军信息进行有效检测。     

光纤水听器阵列在黄浦江航道监测中的应用

详细介绍了布设于黄浦江上游航道的光纤水听器阵列及其工作原理。通过光纤水听器阵列采集过往船只的声信号,结合能量阈值与特征强线谱,实现了对过往船只数量的统计。实验结果表明,船只流量监测功能已基本实现。此外,通过集成其他参量的传感器,扩展了水听器阵列的功能,实现对航道多参量(水温、水位以及淤泥厚度)实时监测。     

Augmented reality assisted facility layout digitization and planning

Journal of Mechanical Science and Technology - Facility layout planning (FLP) has an important role in manufacturing industries. There are few approaches to solve FLP such as procedural,...     

耕地、施肥、插苗、浇灌、垄埂全自动化一体机的设计

现有的传统耕种机械普遍存在着环境适应能力差和工作效率低下等问题,而这些问题也严重影响到了耕种的工作效率和工作质量.为了克服现有技术的不足,设计了一款用SolidWorks建模设计的一种耕地、插苗、浇水、施肥、隆埂全自动化一体机,该机构主要由机车、扎土装置、施肥装置、碾平装置、浇灌装置、插苗装置、补苗装置和安装垄埂装置等组成,能够很好地实现耕地、施肥、插苗、浇灌及垄埂等过程的自动化,该机通过多个装置协调运行使幼苗成活率更高,并且通过多次3Dmax仿真实验可以证明,使用此机器后插苗率可高达90％～95％,插苗基本不会存在漏苗脱耕的现象.使用此机器后即可一人一天种出50000颗树苗,植树效率大大提高.若以此机器代替传统机器,能够有效克服现有技术的不足,得到更完善的适应性和更好的经济性.