Preparation of aligned polyetherimide fiber by electrospinning

Fifteen to 20 wt % polyetherimide (PEI) solutions with 1-methyl-2-pyrrolidinone (NMP) were prepared. The electrical conductivity and surface tension of the solutions were determined. The fiber spinning technique of electrospinning was optimized in order to prepare unidirectionally aligned, structurally oriented nanofiber tows. The morphology of the PEI fibers was investigated using field emission scanning electron microscopy (FESEM). The well-aligned fibers with diameters between 0.58 and 0.90 μm (FESEM) were collected by electrospinning 20 wt % PEI solutions with NMP in the range of 8–10 kV onto a target rotating with a surface velocity 9.8 m/s. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Structure and processability of iodinated poly(vinyl alcohol). IV. Drawability of the films iodinated at solution before casting

The drawability of iodinated at solution before casting (IBC) polyvinyl alcohol films prepared by casting aqueous solutions of 10 wt % PVA containing 15.2, 39.8, 83.2, 117.0, and 140.1% was examined with a tensile tester at 20–60°C. The tensile behavior of IBC films showed that the yield and breaking loads were much lower, and the breaking elongation was even higher than those of the unoriented iodinated after casting (IAC) films as well as the untreated PVA films. The maximum draw ratios of the films with the weight gain of 15.2, 39.8, 83.2, 117, and 140.1% were 4.5, 5.5, 8.5, 8.0, and 7.5, respectively, which were achieved at 20°C in all. The crystallinity of all films increased by the maximum draw, regardless of crystallinity before drawing. The crystalline structure was recovered to the original PVA crystalline lattice by deiodination. Amorphous orientation and initial moduli increased with the maximum draw ratio, while the orientation of crystals was constant. The orientation and moduli increased up to the weight gain of 83.2%, whose highest draw ratio and initial modulus were 8.5 and of 7.1 GPa, respectively, and then decreased. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Effects of tube rupture modeling and the parameters on the analysis of multiple steam generator tube rupture event progression in APR1400

A multiple steam generator tube rupture (MSGTR) event in APR1400 has been investigated using the best estimate thermal hydraulic system code, MARS1.4. The effects of the parameters such as the number of ruptured tubes, rupture location, affected steam generator on the analysis of the MSGTR event in APR1400 are examined. In particular, tube rupture modeling methods, single tube modeling (STM) and double tube modeling (DTM), are compared. The APR1400 is found to have the capability of allowing more than 30 min to operators for the MSGTR event of five tubes. The effects of rupture location on the MSSV lift time is not significant in the case of STM, but the MSSV lift time for tube-top rupture is found to be 25.3% larger than that for rupture at the hot-leg side tube sheet in the case of DTM. The MSSV lift time for the cases that both steam generators are affected (4C5x, 4C23x) are found to be larger than that of the single steam generator cases (4A5x, 4B5x) due to a bifurcation of the primary leak flow. The discharge coefficient of Cd is found to affect the MSSV lift time only for a smaller value of 0.5. It is found that the most dominant parameter governing the MSSV lift time is the leak flow rate. Whether any modeling method is used, it gives the similar MSSV lift time if the leak flow rate is close, except in the case where both steam generators are affected. Therefore, the system performance and the MSSV lift time of the APR1400 are strongly dependent on the break flow model used in the best estimate system code.     

Monoclonal antibody-based competitive ELISA for simultaneous detection of rinderpest virus and peste des petits ruminants virus antibodies

An experimental competitive enzyme-linked immunosorbent assay (morbillivirus cELISA) using a recombinant N antigen (rRPV N) expressed in a baculovirus and a ruminant morbillivirus (RPV and PPRV)-specific monoclonal antibody (P-13A9) was developed for simultaneous detection of rinderpest virus (RPV) and peste des petits ruminants virus (PPRV) antibodies and its diagnostic performance was evaluated. A set of known reference antisera against RPV and PPRV belonging to different lineages, experimental sera from cattle vaccinated for a RPV of Asian lineage, and field sera from cattle and sheep/goat populations known to be positive (West Africa) and negative (Korea) for RPV and PPRV were used for the evaluation. Morbillivirus cELISA results on the panel of experimental RPV and PPRV antisera showed high correlation (r=0.97) between the whole virus and the rRPV N antigens, suggesting that the rRPV N contains a ruminant morbillivirus-specific antigenic determinant recognized by the P-13A9 and it may be suitable as an ELISA antigen in place of the whole virus. Morbillivirus cELISA detected anti-RPV and anti-PPRV antibodies in all reference RPV and PPRV antisera containing VN titers >/=1:8, suggesting that the assay can simultaneously detect antibodies against RPV and PPRV. Anti-RPV antibody was detected by morbillivirus cELISA in vaccinated cattle as early as the VNT and continued to be detectable by both the cELISA and the VNT until termination of the study. When applied to field samples from Africa, morbillivirus cELISA showed good agreement with a RP cELISA kit (kappa value of 0.86) in bovine sera and with a peste des petits ruminant cELISA kit (kappa value of 0.81) in caprine/ovine sera. Usefulness of morbillivirus cELISA using the rRPV N protein was discussed.     

On measures of vulnerability of interconnection networks

With the advent of distributed and multiple processing systems, the study of interconnection networks has developed into a field of its own. In most cases, the performance measures used to characterize the reliability of such networks have been primitive.It is our purpose, in this brief paper, to survey the many available measures of the vulnerability of interconnection networks. The most widely known is classical connectivity; however, measures more recently introduced in the graph theory literature are probably a better practical metric of reliability. Our objective is to make these measures more widely known, and to spur the development of good algorithms to calculate them in practical instances.     

Pore‐free mold‐pattern‐transfer method for barrier ribs of HD PDPs

Abstract— Among various barrier‐rib manufacturing processes, the mold‐pattern‐transfer method has potential to reduce processing cost as well as the manufacture of high‐resolution pixels. In this study, the effects of major processing variables of the mold‐pattern‐transfer process on the formation of air‐trapped pores within barrier ribs were examined. The results indicated that with an optimum combination of the processing variables, barrier ribs without trapped defects can be produced, demonstrating the possibility of reducing the number of processing steps and costs of barrier ribs.     

Unconstrained and constrained motion control of a planar two-link structurally flexible robotic manipulator

Unconstrained and constrained motion control of a planar two-link structurally-flexible robotic manipulator are considered in this study. The dynamic model is obtained by using the extended Hamilton's principle and the Galerkin criterion. A method is presented to obtain the linearized equations of motion in Cartesian space for use in designing the control system. The approach to solving the control problem is to use feedforward and feedback control torques. The feedforward torques maneuver the flexible manipulator along a nominal trajectory and the feedback torques minimize any deviations from the nominal trajectory. The feedforward and feedback torques are obtained by solving the inverse dynamics problem for the rigid manipulator and designing linear quadratic Gaussian with loop transfer recovery (LQG/LTR) compensators, respectively. The LQG/LTR design methodology is exploited to design a robust feedback control system that can handle modeling errors and sensor noise, and operate on Cartesian space trajectory errors. Computer simulated results are presented for an example planar, two-link, structurally flexible robotic manipulator. © 1994 John Wiley & Sons, Inc.     

Steroidal glycosides of the 14,15-seco-18-nor-pregnane series from Cynanchum ascyrifolium

Three new steroidal glycosides named cynascyrosides A-C were isolated from the roots of Cynanchum ascyrifolium. The structures of these compounds were determined on the basis of spectroscopic and chemical evidence as cynajapogenin A 3-O-alpha-D-oleandropyranosyl-(1-->4)-beta-L-cymaropyranosyl -(1-->4)-beta-D- digitoxopyranoside; cynajapogenin A 3-O-beta-D-glucopyranosyl-(1-->4)-alpha-L-cymaropyranosyl- (1-->4)-beta-L-cymaropyranosyl-(1-->4)-beta-L-cymaropyranoside+ ++; cynajapogenin A 3-O-beta-D-glucopyranosyl-(1-->4)-alpha-L-cymaropyranosyl- (1-->4)-beta-D-digitoxopyranosyl-(1-->4)-beta-L-cymaropyranosid e.     

Central GABAA and GABAB receptor modulation of basal and stress-induced plasma interleukin-6 levels in mice

The development of control strategies for loiasis is of crucial importance in endemic areas and depends heavily on the accurate identification of occult-infected individuals. A polymerase chain reaction (PCR) and nested polymerase chain reaction (nested PCR) were developed and based on sequences of the repeat 3 region (15r3) of the gene encoding a Loa loa 15-kD protein. The assays was performed on 20 blood samples from occult-infected subjects and 30 from field-collected amicrofilaremic individuals. The size of the initial PCR product was 396 basepairs (bp). When this initial amplification using primers 15r3(1) and 15r3(2) was carried out for 30 cycles, the PCR products from three of the 20 occult-infected and five of the 30 amicrofilaremic individuals were visualized after electrophoresis by staining the gel with ethidium bromide. Subsequent Southern blotting and hybridization with the specific probe revealed hybridization in 19 of 20 occult-infected and 23 of 30 amicrofilaremic samples but only after two days of exposure of the blot to the x-ray film. When the nested PCR was carried out (product size = 366 bp, primers 15r3(3) and 15r3(4)), 19 of 20 occult-infected and 23 of 30 amicrofilaremic samples that were positive by Southern hybridization of the initial PCR products were strongly positive by staining with ethidium bromide. Qualitative Southern blotting of the nested PCR products using the same probe previously described confirmed the ethidium bromide staining results after a very short exposure time of 4 hr. These results demonstrate that the nested PCR amplification product is specific and that its sensitivity in detecting occult loiasis is 95%. This approach has significant promise for the screening of large human populations for active loiasis without the requirement for blotting and hybridization of the PCR products.