Impact of Incorporating Substituents onto the P‐o‐Anisyl Groups of DiPAMP Ligand on the Rhodium(I)‐Catalyzed Asymmetric Hydrogenation of Olefins

The introduction of 1,2‐bis[(o‐anisyl)(phenyl)phosphino]ethane (DiPAMP) as a P‐stereogenic ligand for rhodium(I)‐catalyzed hydrogenation by Knowles et al. came after their evaluation of several diphosphines. However, no in‐depth study was carried out on incorporating various substituents on its P‐o‐anisyl groups. In this work, we have prepared a large series of enantiopure and closely related DiPAMP analogues possessing various substituents (MeO, TMS, t‐Bu, Ph, fused benzene ring) on the o‐anisyl rings. The new ligands were evaluated in rhodium‐catalyzed hydrogenation of several model substrates: methyl α‐acetamidoacrylate, methyl (Z)‐α‐acetamidocinnamate, methyl (Z)‐β‐acetamidocrotonate, dimethyl itaconate, and atropic acid. They displayed enhanced activities and increased enantioselectivities, particularly the P‐(2,3,4,5‐tetra‐MeO‐C₆H)‐substituted ligand (4MeBigFUS). Interestingly enough, 88% ee was obtained in the hydrogenation of atropic acid using the Rh‐(4MeBigFUS) catalyst under mild conditions (10 bar H₂, room temperature) versus 7% ee using Rh‐DiPAMP. Conversely, the ligand possessing P‐(2,6‐di‐MeO‐C₆H₃) groups proved to slow down considerably the hydrogenation. X‐Ray structures of their corresponding Rh complexes are presented and discussed.     

Robotic Assembly System in Semiconductor Industry

A sensor-based robotic production system for assembly of rectifier bridges is described. Assembly tasks in semiconductor industry require a robot with good positional accuracy having the capability of high velocities and accelerations in all degrees of freedom. An important part of the semiconductor production is to measure the diode properties. The trajectory of the manipulator end-effector is determined by the results from these measurements. A vaccum gripper with an air flow sensor is also used in this particular task. The robotic language DARL was used to control the assembly process.     

Elektrodenkinetische Untersuchungen zum Siliciumdurchtritt an der Phasengrenze zwischen einer kieselsäurehaltigen Oxidschmelze und einer siliciumhaltigen Metallschmelze

Bedeutung elektrochemischer Untersuchungen von Reaktionen zwischen flüssigen Metallen und Schlacken. Aufbau einer galvanischen Kette, deren Bruttoreaktion der Bildung von SiO₂ entspricht. Anwendung der galvanostatischen Impulsmethode zur Ermittlung der Abhängigkeit der Stromdichte von der Durchtrittsüberspannung und der Austauschstromdichte beim Siliciumdurchtritt an der Phasengrenze Metallschmelze/Oxidschmelze. Ergänzende Messungen der EMK und der Stromausbeuten in bezug auf elektrolytisch entwickelten Sauerstoff.     

Pharmacokinetics of morphine and its glucuronides after intravenous infusion of morphine and morphine-6-glucuronide in healthy volunteers

Steady-state pharmacokinetics of morphine and morphine-6-glucuronide (M-6-G) after intravenous administration of either morphine or M-6-G were determined in healthy volunteers. With a dosing regimen calculated on the basis of data obtained in a first series of experiments in four subjects (morphine: intravenous loading dose of 0.24 mg/kg for 5 minutes and an intravenous infusion of 0.069 mg.kg-1.hr-1 for 4 hours; M-6-G: loading dose of 0.011 mg/kg for 5 minutes and an infusion of 0.006 mg.kg-1.hr-1 for 4 hours), it was possible to yield plasma concentrations of morphine and M-6-G in another four subjects close to predefined targeted levels (35 and 45.5 ng/ml morphine and M-6-G, respectively). This dosing regimen may be used in further pharmacodynamic studies to compare the analgesic effects of morphine and M-6-G. In addition, metabolite kinetics of M-6-G were calculated as a function of time with use of a linear systems approach to the estimation of rate and fraction of morphine glucuronidation to M-6-G.     

"Sniffin'' sticks": screening of olfactory performance

OBJECTIVE: To study the loss of antimicrobial susceptibility in repeat (same patient, same bacterial species, and same site) aerobic gram-negative bacilli (AGNB) isolated from individual patients during their stay in the intensive-care unit (ICU). SETTING: A 792-bed, tertiary-care community hospital with a total of 107 adult, pediatric, and neonatal ICU beds. METHOD: An observational prospective study performed November 1992 through mid-July 1993. RESULTS: Of 594 consecutive AGNB from 287 ICU patients, 117 isolates (20%) from 55 patients (19%) were repeat isolates, with the majority obtained from respiratory secretions (83%). Pseudomonas aeruginosa and Enterobacter species accounted for 61% of the isolates. Forty-two (36%) of the repeat isolates from 24 patients (44%) had > or = 4-fold increase in minimum inhibitory concentration to at least one antibiotic and no longer were considered fully susceptible based on National Committee on Clinical Laboratory Standards criteria. Loss of antimicrobial susceptibility often developed within several (median 8) days and was associated only infrequently with simultaneous transition from colonization to infection in the individual patient. Use of certain beta-lactam antibiotics was associated with increasing resistance to several other antibiotics in the same class. Concurrent use of beta-lactams and aminoglycosides did not prevent loss of antimicrobial susceptibility to the former in repeat isolates. CONCLUSION: We conclude that loss of antimicrobial susceptibility in repeat AGNB isolated from ICU patients is common, usually is not associated with transition from colonization to infection, and often is associated with prior use of antibiotics. Minimizing antibiotic use in ICU patients should help reduce the risk of antimicrobial resistance in repeat AGNB isolates.     

Compressed vertex chain codes

This paper introduces three new vertex chain codes. Firstly, considering that the vertex chain code uses 2 bits to represent only three code elements, a new code is introduced without increasing the average bits per code. The second case introduces a variable-length vertex chain code. Finally, a new compressed chain code is proposed based on the Huffman method. The continuation introduces a method for quantificationally evaluating the efficiency of chain codes. The efficiencies of the new vertex chain codes are then compared theoretically and practically against the most popular chain codes. The result of the comparison shows that the new compressed chain code is the most efficient.     

Influence of treatment temperature on wettability of Norway spruce thermally modified in vacuum

Wettability of Norway spruce modified by a new vacuum thermal modification procedure was studied. The mass loss caused by this process ranged from almost 0% when treated at 140?°C to 4.3% at 210?°C. Apparent contact angles of water, formamide, and diiodomethane were measured by the Wilhelmy plate method on the specimens taken from the centers of the thermally modified wood samples. For the treatment at the highest temperature, the contact angle of water was significantly higher when compared to untreated spruce (96.6° vs. 83.6°); lower treatment temperatures, however, did not result in a clear correlation between treatment temperature and contact angle. Formamide yielded lower contact angles for treated spruce compared to the untreated one, but without clear influence of the treatment temperature and diiodomethane always gave perfect wetting. Surface energy calculations according to the Owens, Wendt, Rabel, and Kaelble method revealed that the thermal modification process in vacuum increased the surface free energy and lowered the polarity of wood significantly only at the highest applied temperature (210?°C); the treatment had only limited effect at lower temperatures of modification. These results indicate that adequate wetting and adhesion can be achieved on the surfaces of Norway spruce thermally modified in vacuum.     

Polyurethane coatings from liquefied wood containing remains of a copper‐, chromium‐, and boron‐based wood preservative

Preparation of polyurethane wood coatings based on copper‐, chromium‐, and boron (CCB) containing liquefied wood was performed, as an alternative way to manage postconsumed preservative‐contaminated wood. Additionally, we examined the possibility of improvement of selected properties of the liquefied wood‐based coatings by an addition of silica nanoparticles. The constituents of the CCB wood preservative do not exhibit an influence on a liquefaction process and on composition of the liquefied mixture. CCB also does not affect curing of the formulations containing liquefied wood and an isocyanate‐type hardener. Furthermore, influence of CCB on adhesion strength of liquefied wood‐based coatings on a wooden substrate, their hardness, and resistance to scratching and to water, acetone, and alcohol, is not exhibited. However, apart from these, from the applicative point of view, positive results, any improvement of the coating properties by the addition of silica nanoparticles is not shown. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40865.