Spectrum efficient region-based resource allocation with fractional loading for FH-OFDMA cellular systems

A practical resource management method that can significantly reduce cochannel interference (CCI) and improve spectrum utilisation in FH-OFDMA packet-based cellular networks is presented. The proposed method seeks an effective combination of dynamic resource allocation with fractional coding and bit loading to respectively minimise CCI and maximise system throughput for a desired performance.     

Stress Mechanism about Field Lightning Surge of High Voltage BJT Based Line Driver for ADSL System

In this paper, we have verified stress root caused by lightning surge in High voltage BJT based line driver of ADSL telecommunication and created failure mechanism. To reproduce damages in Line driver, we have applied STD surge waveform in operating condition, which is specified in IEC-6000-4-5, to component and board level. Visual isolation for Damage root was conducted with Real-time Electrical Stress Analysis (RTESA) utilizing Photon Emission Microscopy (PEM). The surge made with input of Tx output created junction breakdown of amplifier, which is made of HVBJT cells, and also caused current crowding from Vcc (supply voltage). In case of Positive pulse, current crowding was observed from between Collector and Vcc (+)12V. For negative pulse, at between Emitter and Vee (−)12V, current crowding was found. For both cases, device damage level was the same. All of these could be considered as transient latchup phenomenon created in BJT cell. Applying temporary clamping diode to line driver Tx, we have conducted Board level surge injection test. As a result, with the correlation between surge level from component level reproduction test and the one from system level, we have decided field lightning surge damage level and set up line driver protection margin.     

Stable single-frequency fiber ring laser for 25-GHz ITU-T grids utilizing saturable absorber filter

A stable single-frequency fiber ring laser is proposed that operates in a single mode for more than an hour by incorporating unpumped erbium-doped fiber (EDF) as a saturable absorber filter and optimizing the length of EDF used as gain medium. This laser can be continuously tuned to 25-GHz spacing that precisely matches the ITU-T grids by temperature control of etalon filter. This laser had a signal-to-source spontaneous emission ratio higher than 70 dB, and lasing frequencies of 361 channels was matched to ITU-T grids with excellent flatness. Frequency offset from the ITU-T grid was less than 0.14 GHz. The linewidth and the relative intensity noise value was less than 1.3 kHz and 130 dB/Hz (above 250 kHz), respectively.     

Decision feedback detection with error compensation for hybrid space-time block codes

Spatial division multiplexing (SDM) techniques increase the total throughput by transmitting independent information streams through multiple transmit antennas whereas space time coding (STC) techniques utilize diversity gain. Hybrid space-time block code (STBC) schemes proposed combine the above two techniques to maximize the link performance. We propose a decision feedback detection method to improve the performance of the hybrid STBC scheme for orthogonal frequency division multiplexing (OFDM). In this scheme, we take the error propagation effect into account to enhance the detection performance. Simulation results show that the proposed method outperforms the conventional hybrid STBC detection algorithm by more than 3dB at 1% frame error rate for frequency selective fading channels.     

Effects on signal integrity and radiated emission by split reference plane on high-speed multilayer printed circuit boards

Power/ground partitioning has been used to supply multivoltage levels and to isolate power/ground noise in high-speed multilayer printed circuit boards. However, the partitioning of the power/ground plane breaks the current return path of the signal current through either the power plane or the ground plane, which causes undesired effects such as signal distortion, crosstalk, and radiation. To control and suppress these undesired effects, we should understand the electromagnetic mechanism associated with them. In this paper, the mechanism of the reflection and the transmission of the signal by the slotted power/ground plane is well understood through an analysis of measurements based on time-domain reflectometry. Considering the propagation of a slot wave through the slot line on the power/ground plane, we have successfully explained the changes of the transmitted and reflected waveforms. Furthermore, we have numerically and experimentally investigated the effects of the power/ground partitioning on the radiated emission in various structures. Finally, it is confirmed that the employment of a stitching capacitor on the power/ground slot suppresses the signal distortion and the radiated emission significantly. When the size and the location of the stitching capacitor are designed, there should be a compromise between the noise isolation and the guarantee of the return current path, with considering the resonance frequencies of planes by the capacitor.     

CPW bandstop filter using slot-type SRRs

The bandstop characteristic of a slot-type split-ring resonator (SRR) on a substrate used for microwave frequencies is presented for a bandstop filter. Analogously to the conventional strip-type SRR, the slot-type SRR is very attractive for notching unwanted band because of its small dimension and high Q operation. In addition, the complementary SRR can be easily applied for coplanar configuration, which is favourable to MMIC designs. Based on the simulation and measurement results, the slot-type SRR for the bandstop filter is very effective in rejecting unwanted frequency in terms of its selectivity and size.     

Inrush current estimation and hot-swapping for safe parallel battery pack

ABSTRACT

Batteries used in electric vehicles and microgrid applications use battery modules connected in series to satisfy the voltage required for each system, and battery modules are connected in parallel to increase capacity. In this parallel connected system, in order to disconnect and reconnect a specific battery module or to reconnect a new battery module, the battery module to be newly connected should have a small state of charge (SOC) difference from the existing battery modules. In particular, when a new battery is to be connected under a load current, there is a problem that excessive inrush current may occur in a specific battery module due to the load current distributed to each module and the current due to the SOC difference. Therefore, in this paper, we propose a method of estimating the inrush current through an equivalent electrical modelling analysis for the case where a battery module is newly added in a system in which the battery modules are connected in parallel. In addition, the power management algorithm for the battery pack system with inrush current estimation is presented. The proposed method is validated through simulations and experiments of a battery pack system in which 10 battery modules of 710V and 120Ah are connected in parallel.     

Design of Millimeter Wave TFMS Bandpass Filter

In this paper, a Ka-band thin film microstrip line(TFMS) filter with multi-layer structure on silicon substrate is introduced. The simulated results show that it is possible to design compact millimeter-wave filter on silicon substrate with process compatible to current VLSI technology.     

Scalability study of the ad hoc on‐demand distance vector routing protocol

As mobile networking continues to experience increasing popularity, the need to connect large numbers of wireless devices will become more prevalent. Many recent proposals for ad hoc routing have certain characteristics that may limit their scalability to large networks. This paper examines five different combinations of modifications that may be incorporated into virtually any on‐demand protocol in order to improve its scalability. The scalability of current on‐demand routing protocols is evaluated through the selection of a representative from this class of protocols. The performance of the un‐modified on‐demand protocol is compared against that of it combined with each of the scalability modifications. Each scheme's behavior is analyzed in networks as large as 10,000 nodes through detailed simulation. Based on the observations, conclusions are drawn as to the expected scalability improvement that can be achieved by each modification. Copyright © 2003 John Wiley & Sons, Ltd.