Oxidative dehydrogenation of ethane on Pt–Sn impregnated monoliths

The oxidative dehydrogenation of ethane was studied over Pt–Sn impregnated monoliths at 1 bar, 600–900 °C and with different contents of oxygen, hydrogen and steam in the feed gas. As expected a decrease in oxygen in the feed led to a decrease in the conversion of ethane due to lower temperatures in the reactor. Adding steam to the feed showed no effect on the ethane conversion or the ethene selectivity. When the hydrogen/ethane ratio in the feed was varied from 0 to 0.5 at 700 and 850 °C, it resulted in a significant increase in the selectivity to ethene while the ethane conversion remained relatively unchanged. At 700 °C the selectivity increased from about 50% to 93% (carbon basis) with only a small decrease in the conversion of ethane. The results clearly show that both Pt and Sn have a catalytic effect. Pt caused the ethane conversion to rise and addition of Sn resulted in much better ethene selectivity. However, even though Sn alone showed some catalytic effect at lower temperatures, it cannot explain the great difference between the Pt and Pt–Sn catalysts. A reasonable assumption is therefore that there exist interactions between Pt and Sn that gives the Pt–Sn catalysts excellent properties for oxidative dehydrogenation of ethane, in particular upon addition of hydrogen.     

Transdermal and Buccal Delivery of Methylxanthines Through Human Tissue In Vitro

ABSTRACT

We examined the in vitro permeation of central nervous stimulants—caffeine, theophylline, and theobromine across human skin with the aid of six chemical enhancers. It was found that oleic acid was the most potent enhancer for all three methylxanthines. Further optimization studies with different solvents showed that caffeine transport could be enhanced to give flux values up to 585 μg/cm².hr^?1. Theobromine and theophylline delivery rates proved insufficient. An additional study involving a buccal tissue equivalent showed that this membrane was more permeable than skin for all model actives tested and would offer an alternate way of delivery.     

The influence of distribution of titanium alloyed into carbon ceramics by the intense plasma pulses on their surface wettability with liquid copper

The paper presents an analysis of wettability and structural properties of the near surface layer of carbon ceramics into which titanium atoms were alloyed using a new method based on the use of high intensity pulsed plasma beams. The influence of various parameters of ceramic pre-treatment process on their wettability with liquid copper is presented and discussed. The information obtained can be useful in designing the ceramic–metal joints and composites.     

Variations in mouse (Mus musculus) urinary volatiles during different periods of pregnancy and lactation

Mouse urine samples from different pregnancy and lactation periods were examined by capillary gas chromatography to assess variations in the volatile signals that may affect the endocrine function of other females. Statistically significant changes in the excretion of certain urinary volatiles were observed; from 26 readily quantifiable constituents, 14 appear to be under the endocrine control. These selected components, positively identified through mass spectrometry and retention data, and the synthetic standards are ketones, unsaturated alcohols, esters, and cyclic vinyl ethers.     

Ferroelectric domain structure of [N(CH3)4]2 ZnC14 single crystals

Ferroelectric domain structure of tetramethylammonium zinc chloride was revealed in the temperature range 275. 8R-279. OK by means of scanning electron microscopy. The domain patterns of lamellar type were observed. The mean width of the domains at 276.1 K amounted to 10 μm.     

Reconstruction method for jitter tolerant data acquisition system

A waveform digitizing system tolerant to deterministic jitter can be obtained by isolating the deterministic part of the jitter and calibrating the system to eliminate its effects. Calibration of the system can be made from measured nonuniform sampling times. It will be shown that this information allows reconstructing the signal at uniformly spaced sampling times. To reconstruct a signal from its nonuniform samples, we use the Shannon expansion combined with a time stretching/compressing method. Moreover, the reconstruction of a signal from a finite number of samples introduces a truncation error. We propose, using a windowing technique, to reduce the truncation error, which improves considerably the resolution, or the number of effective bits of an analog to digital conversion system.     

Sorption of aurocyanide and tetrachloroaurate onto resin with guanidine ligand—an XPS approach

The guanidine ligand attached to vinylbenzyl chloride matrix as well as its sorption ability to tetrachloroaurate and dicyanoaurate ions were investigated upon using X-ray photoelectron spectroscopy. The form of metallic gold, Au(0), was not observed on gold loaded resin surface when solutions of tetrachloroaurate or potassium dicyanoaurate were used. Complete elution of gold was achieved for both regeneration media: thiourea solution and mixture of sodium hydroxide and benzoate. The results demonstrate that XPS can also be a powerful technique for the analysis of the oxidation state of sorbed metal and can be a suitable method for the confirmation of functional groups incorporated in the polymer.     

Nanostructured Non-Ionic Surfactant Carrier-Based Gel for Topical Delivery of Desoximetasone

Psoriasis is a chronic autoimmune skin disease impacting the population globally. Pharmaceutical products developed to combat this condition commonly used in clinical settings are IV bolus or oral drug delivery routes. There are some major challenges for effectively developing new dosage forms for topical use: API physicochemical nature, the severity of the disease state, and low bioavailability present challenges for pharmaceutical product developers. For non-severe cases of psoriasis, topical drug delivery systems may be preferred or used in conjunction with oral or parenteral therapy to address local symptoms. Elastic vesicular systems, termed “niosomes”, are promising drug delivery vehicles developed to achieve improved drug delivery into biological membranes. This study aimed to effectively incorporate a corticosteroid into the niosomes for improving the drug bioavailability of desoximetasone, used to treat skin conditions via topical delivery. Niosomes characterization measurements were drug content, pH, spreadability, specific gravity, content uniformity, rheology, and physicochemical properties. Formulations used a topical gelling agent, Carbomer 980 to test for in vitro skin permeation testing (IVPT) and accelerated stability studies. The developed niosomal test gel provided approximately 93.03 ± 0.23% to 101.84 ± 0.11% drug content with yield stresses ranging from 16.12 to 225.54 Pa. The permeated amount of desoximetasone from the niosomal gel after 24 h was 9.75 ± 0.44 µg/cm² compared to 24.22 ± 4.29 µg/cm² released from the reference gel tested. Furthermore, a drug retention study compared the test gel to a reference gel, demonstrating that the skin retained 30.88 ng/mg of desoximetasone while the reference product retained 26.01 ng/mg. A controlled drug release profile was obtained with a niosomal formulation containing desoximetasone for use in a topical gel formulation showing promise for potential use to treat skin diseases like psoriasis.