Interactions of gamma rays with tungsten-doped lead phosphate glasses

Undoped lead phosphate glass of the composition PbO 50 mol%, P₂O₅ 50 mol% together with samples of the same ratio doped with various WO₃ contents were prepared. UV–Visible spectroscopic studies were measured out in the range 200–1100 nm before and after successive gamma irradiation. Infrared and Raman spectroscopic measurements were carried out for the undoped and WO₃-doped samples. All the prepared samples are observed to absorb strongly in the UV region due to the combined contributions of absorption from trace iron impurities and sharing of lead Pb²⁺ ions. The bluish WO₃-doped lead phosphate samples reveal visible absorption bands which are attributed to the existence of pentavalent W⁵⁺ ions. ESR measurements support this assumption. Infrared and Raman spectra indicate the presence of metaphosphate chains as the structural main building units and the possible presence of appreciable pentavalent (W⁵⁺O₃) of W⁵⁺ units together with hexavalent WO₄ units. Gamma irradiation reveal the shielding behaviour of the studied tungsten-doped lead phosphate glasses due to the combined presence of heavy Pb²⁺ ions and tungsten ions.     

Composition of peel essential oils from four selected Tunisian Citrus species: Evidence for the genotypic influence

The peel essential oils from four selected Tunisian Citrus species: sweet orange (Citrus sinensis Osbeck), mandarin (Citrus reticulata Blanco); sour orange (Citrus aurantium L.) and pummelo (Citrus grandis Osbeck), cultivated under the same pedoclimatic and cultural conditions have been analysed by gas chromatography (GC) and gas chromatography–mass spectrometry (GC–MS). The essential oils content ranged from 1.06% to 4.62% (w/w) in pummelo and mandarin, respectively. The qualitative and quantitative analysis led to the identification of 70 components in all oil samples. The analysed oils consist mainly in monoterpene hydrocarbons (97.59–99.3%), with limonene (92.52–97.3%) and β-pinene (1.37–1.82) being the major constituents. The remaining chemical classes were weakly represented (<1%). Both qualitative and quantitative differences between oil samples have been observed and numerous components have been proposed as marker compounds. Since the influence of different environmental factors has been eliminated, the observed chemical variability between the studied species and cultivars seems likely to results from the genetic variability.     

Formulation and in vitro evaluation of a thermoreversible mucoadhesive nasal gel of itopride hydrochloride

Itopride hydrochloride (ITO HCl) is a prokinetic agent, used in the treatment of gastrointestinal motility disorders. The aim of the study was to develop stable mucoadhesive thermoreversible nasal gel to avoid first pass effect. ITO HCl was incorporated into the blends of thermoreversible polymers like poloxamer 407 and various mucoadhesive polymers in different concentrations to increase the contact of the formulations with nasal mucosa. The compatibility between the drug and the suggested polymers was studied by Fourier transform infrared and differential scanning calorimetry (DSC). The formulations were evaluated for clarity, pH, gelation temperature, mucoadhesive strength, gel strength, viscosity, and drug content. In addition, the in vitro drug release and the dissolution efficiency (DE)% were measured. The optimized formulations that showed the highest dissolution efficiency% (DE%) in saline phosphate buffer of pH 6.4 at 35?±?0.5?°C were chosen for stability testing at temperatures of 4?±?2 and 25?±?2?°C/60?±?5% RH. It was found that F1 and F17 that contain 18% w/v poloxamer 407 and 0.5% w/v of hydroxypropylmethyl cellulose K4M or methyl cellulose (MC), respectively, showed higher stability results as indicated by their higher t₉₀ values (days).     

Search and Rescue Optimization with Machine Learning Enabled Cybersecurity Model

Presently, smart cities play a vital role to enhance the quality of living among human beings in several ways such as online shopping, e-learning, e-healthcare, etc. Despite the benefits of advanced technologies, issues are also existed from the transformation of the physical word into digital word, particularly in online social networks (OSN). Cyberbullying (CB) is a major problem in OSN which needs to be addressed by the use of automated natural language processing (NLP) and machine learning (ML) approaches. This article devises a novel search and rescue optimization with machine learning enabled cybersecurity model for online social networks, named SRO-MLCOSN model. The presented SRO-MLCOSN model focuses on the identification of CB that occurred in social networking sites. The SRO-MLCOSN model initially employs Glove technique for word embedding process. Besides, a multiclass-weighted kernel extreme learning machine (M-WKELM) model is utilized for effectual identification and categorization of CB. Finally, Search and Rescue Optimization (SRO) algorithm is exploited to fine tune the parameters involved in the M-WKELM model. The experimental validation of the SRO-MLCOSN model on the benchmark dataset reported significant outcomes over the other approaches with precision, recall, and F1-score of 96.24%, 98.71%, and 97.46% respectively.     

Distribution of the solvent-extractable organic compounds in fine (PM1) and coarse (PM1-10) particles in urban, industrial and forest atmospheres of Northern Algeria

The distribution of the solvent-extractable organic components in the fine (PM₁) and coarse (PM_1-10) fractions of airborne particulate was studied for the first time in Algeria. That was done during October 2006 concurrently in a big industrial district, a busy urban area, and a forest national park located in Algiers, Boumerdes, Blida, respectively, which are the three biggest provinces of Northern Algeria. Most of the organic matter identified in both particle size ranges consisted of n-alkanes and n-alkanoic acids, with minor contributions coming from polycyclic aromatic hydrocarbons (PAHs), nitrated polycyclic aromatic hydrocarbons (NPAHs), oxygenated PAHs, and other polar compounds (e.g., caffeine and nicotine). The potential emission sources of airborne contaminants were reconciled by combining the values of n-alkane carbon preference index (CPI) and selected diagnostic ratios of PAHs, calculated in both size ranges. The mean cumulative concentrations of PAHs reached 3.032 ng m^− 3 at the Boumerdes site, urban, 80% of which (i.e. 2.246 ng m^− 3) in the PM₁ fraction, 6.462 ng m^− 3 at Rouiba-Réghaia, industrial district, (5.135 ng m^− 3 or 80% in PM₁), and 0.512 ng m^− 3 at Chréa, forested mountains (0.370 ng m^− 3 or 72% in PM₁). Similar patterns were shown by all organic groups, which resulted overall enriched in the fine particles at the three sites. Carcinogenic and mutagenic potencies associated to PAHs were evaluated by multiplying the concentrations of “toxic” compounds times the corresponding potency factors normalized vs. benzo(a)pyrene (BaP), and were found to be both acceptable.     

Assessment of the geochemical role of colloids and their impact on contaminant toxicity in freshwaters: an example from the Lambro-Po system (Italy)

The role of colloids in regulating element transport, behavior, and bioavailability in aquatic systems is now well-established. It appears that further progress in this research field is being slowed by (i) a limited integration between the geochemical and the biological aspects of the research on colloids and (ii) a persistent gap between well-controlled laboratory studies and real field situations. This paper presents a simultaneous evaluation of the role of colloids in controlling element environmental fate and bioavailability at the confluence between a major river and a polluted tributary. Fractionation of trace elements among suspended particulate matter, colloids, and true solution suggests that colloids may play a role in the removal of trace elements from the water column to bed sediments during the mixing of the two rivers. Toxicity testing of water samples indicates that, in this specific system, contaminants associated with colloids can contribute to water toxicity for the rotifer Brachionus calyciflorus but not for the green alga Pseudokirchneriella subcapitata. To the best of our knowledge, the results for B. calyciflorus are the first ones pointing to the possible contribution of colloid-bound contaminants to water toxicity in environmental samples. Despite the uncertainties associated with field variability, the results of chemical analysis and toxicitytesting show several points of convergence. Following these observations, a few innovative research approaches are suggested to improve the understanding of trace element biogeochemistry in real field situations.     

Electromagnetic beam diffraction by a finite lamellar structure: an aperiodic coupled-wave method

We have developed a new formulation of the coupled-wave method (CWM) to handle aperiodic lamellar structures, and it will be referred to as the aperiodic coupled-wave method (ACWM). The space is still divided into three regions, but the fields are written by use of their Fourier integrals instead of the Fourier series. In the modulated region the relative permittivity is represented by its Fourier transform, and then a set of integro-differential equations is derived. Discretizing the last system leads to a set of ordinary differential equations that is reduced to an eigenvalue problem, as is usually done in the CWM. To assess the method, we compare our results with three independent formalisms: the Rayleigh perturbation method for small samples, the volume integral method, and the finite-element method.     

Enhanced confined light transmission by single subwavelength apertures in metallic films

The diffraction of light that emerges from a metallic circular aperture is studied. Near- and far-field results are presented. Spectral angular transmitted intensities are performed versus the incident wavelength for four kinds of aperture. It is shown that, for a definite configuration, a large enhancement of transmission--compared with the basic case of a single hole--occurs combined with a spectacular angular confinement of light. Such effects are, for example, of great interest in optical near-field microscopy for which the probe is a nanosource.