Zn in Athenian Black Gloss Ceramic Slips: A Trace Element Marker for Fabrication Technology

The black‐colored pottery slips produced in Athens from the 6th to 4th centuries B.C., had a consistent composition achieved through processing and refinement of raw clay. Little direct evidence has been established as to what were these refinement methods. To better understand how the slip material was prepared, the major and trace elemental compositions of 19 slips from different ceramic vessels and their corresponding bodies of Athenian red‐figure and black‐figure vases were determined using laser ablation inductively coupled plasma mass spectrometry (LA‐ICPMS). Notably higher Zn concentrations were found in the slips (271–1959 ppm) than in their corresponding body ceramics (<361 ppm). The Zn concentrations in the slips were also found to be above the natural background for typical clay (between 10 and 300 ppm) suggesting an unintentional anthropogenic enrichment of this metal. Based on the abnormally high Zn content of the slip, it is speculated that the clay was treated using vitriol (concentrated acid mine runoff which is rich in Zn), to induce flocculation and remove carbonate mineral phases from the raw material that, if present, would prevent the slip from vitrifying. This same signature of elevated levels of Zn with a corresponding Ce anomaly is also observed for black glosses produced in Corinthian and Etrurian (Italy) workshops indicating that these trace element signatures were imparted to the material by means of shared methods of manufacturing instead of being indicative of a single unique source for this material.     

Helium permeability of polymer materials as liners for composite overwrapped pressure vessels

Polymers have been identified as replacement materials for metallic liners in composite overwrapped pressure vessels (COPVs) for future space launchers. PEEK, Nylon, and PVDF plastics formed from base powder grades have been permeability tested to determine their susceptibility to the diffusion of helium through flatwise panel cross sections. Permeability, diffusion, and solubility coefficients have been obtained for each material with PVDF and PA11 grades showing the lowest permeability coefficients and hence the best barrier properties to permeation. Crystallinity percentages and internal air void contents in the polymer samples have also been used to assess the differences in permeability between materials with an analysis of void dispersion effects given through X‐ray CT scanning techniques. The measured permeability coefficients have been used to assess the ability of all materials tested to act as a functional polymer liner in a standard COPV with final leak rates predicted based on liner thicknesses and weights. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43675.     

Developing toughened aromatic polybenzoxazines using thermoplastic oligomers and telechelics,part 1: Preparation and characterization of the functionalized oligomers

The preparation and characterization of three families of thermoplastic oligomers (M_n = 2918–13263 g mol^?1) based on polyarylsulfone (PSU) differing in both molecular weight and terminal functionality and one series of polyarylethersulfone (PES) of different molecular weights is reported. Infrared and nuclear magnetic resonance spectroscopy data support the formation of both the hydroxyl terminated oligomers and conversion (67–89% depending on molecular weight) to the telechelic PSU oligomer bearing reactive benzoxazine groups. Differential scanning calorimetry reveals that the onset of homopolymerization in the telechelic PSU oligomer occurs at around 100°C (peak maximum 125°C at 10 K/min) and rescans show values of the glass transition (for the homopolymers) ranging from 124 to 167°C depending on molecular weight. The influence on the oligomer backbone and terminal functionality is examined using thermal analysis. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40875.     

Studies of temperature and time-dependent network formation in commercial epoxy resins using modified imidazole curing agents

Two commercial epoxy resins, MY750 and MY720, were cured over a range of cure temperatures with a series of novel curing agents based on modified imidazoles. A combination of techniques, including dynamic viscometry, proton nuclear magnetic resonance spectroscopy, differential scanning calorimetry, high performance and gel permeation chromatography, were used to analyse the reaction mixture. It appears that for a given formulation and given resin, the viscosity behaviour near gelation is different for different cure temperatures and the mechanism appears to be dependent not only on the nature of the imidazole curing agent, but also on the cure temperature. Higher temperature cure appears to lead to the formation of a less ‘homogeneous’ reaction mixture at the gel point, containing oligomeric chain lengths of higher polydispersity, whereas in the lower temperature cure, oligomers of a smaller range of chain lengths are present.     

Molecular Networking for Drug Toxicities Studies: The Case of Hydroxychloroquine in COVID-19 Patients

Using drugs to treat COVID-19 symptoms may induce adverse effects and modify patient outcomes. These adverse events may be further aggravated in obese patients, who often present different illnesses such as metabolic-associated fatty liver disease. In Rennes University Hospital, several drug such as hydroxychloroquine (HCQ) have been used in the clinical trial HARMONICOV to treat COVID-19 patients, including obese patients. The aim of this study is to determine whether HCQ metabolism and hepatotoxicity are worsened in obese patients using an in vivo/in vitro approach. Liquid chromatography high resolution mass spectrometry in combination with untargeted screening and molecular networking were employed to study drug metabolism in vivo (patient’s plasma) and in vitro (HepaRG cells and RPTEC cells). In addition, HepaRG cells model were used to reproduce pathophysiological features of obese patient metabolism, i.e., in the condition of hepatic steatosis. The metabolic signature of HCQ was modified in HepaRG cells cultured under a steatosis condition and a new metabolite was detected (carboxychloroquine). The RPTEC model was found to produce only one metabolite. A higher cytotoxicity of HCQ was observed in HepaRG cells exposed to exogenous fatty acids, while neutral lipid accumulation (steatosis) was further enhanced in these cells. These in vitro data were compared with the biological parameters of 17 COVID-19 patients treated with HCQ included in the HARMONICOV cohort. Overall, our data suggest that steatosis may be a risk factor for altered drug metabolism and possibly toxicity of HCQ.     

Quantification of grain boundary defect chemistry in a mixed proton-electron conducting oxide composite

Dual phase oxide membranes have shown promising hydrogen permeation fluxes in syngas applications due to their high mixed proton electron conduction (MPEC). However, the conductivity of grain boundaries can be many orders of magnitude lower than that of the bulk and so limits the total conductivity and hydrogen permeation. In this study, the three-dimensional nanoscale oxygen and cation distributions around grain and phase boundaries in a BaCe_0.8Y_0.2O_3-δ-Ce_0.8Y_0.2O_2-δ (BCY-YDC) membrane were quantified by atom probe tomography (APT) and related to average grain boundary conductivity measured by electrochemical impedance spectroscopy (EIS). Segregation varied among the general high-angle grain boundaries analyzed, but no trend from orientation analysis was determined. Correlative APT and electron energy loss spectroscopy (EELS) of one YDC grain boundary revealed composition and cerium valence information, respectively, allowing for the determination of vacancies at the grain boundary. While a specific MPEC membrane is characterized, the results are relevant to proton and electron conduction in a number of technologically important ceramics.     

Scalable measurements of tow architecture variability in braided ceramic composite tubes

The performance of braided ceramic matrix composites has been shown to depend on the spatial arrangement of tows; therefore, a new class of tools is required to measure irregularities in the composite architecture for components with intricate geometries. We report a scalable and robust reconstruction technique built upon stereoscopic digital image correlation that is able to efficiently measure the position of tows in arbitrarily shaped composites. This method was applied to triaxially braided ceramic matrix composite tubes intended for use as nuclear fuel cladding, which revealed both long‐range “systematic” tow packing defects associated with the manufacturing process and short‐range “intrinsic” defects due to the braid architecture. These findings suggested that the character of tow spacing variation in braided composite tubes was substantially more complex than in planar woven composites. These measurements are expected to lead to improved processing of braided composites and to facilitate the design of statistically representative virtual specimens for finite element modeling.