Score statistics for testing serial dependence in count data

In this study, we extend earlier work of Freeland (1998) and Jung and Tremayne (2003) , and develop a general formula for a score statistic to test for dependence in an integer autoregressive process with an arbitrary arrivals distribution. We give two statistics that cater for arrivals processes that may be under‐, equi‐ or overdispersed. The first is based on the Katz family which includes Poisson, binomial and negative binomial distributions as special cases. The second uses the generalized Poisson which includes the Poisson distribution as a special case and can also cater for under‐ and over‐ dispersion. The null distribution of the tests is provided and consistency is discussed. Size and power properties are investigated under different model assumptions by Monte Carlo simulations. The autocorrelation coefficient is also investigated as a benchmark for comparison.     

100 GHz MMIC Power Source Development Study

This paper comprises a tutorial in the development of MMIC based high frequency multiplier chains, suitable for use in high frequency power sources. The development of suitable single function building blocks is discussed. The arrangement of suitable combinations of these building blocks in more complex cascaded chains is also presented. A strategy to aid in the identification of an optimum solution for the nominal requirement is provided. Using this approach, it is shown that a 25 to 100GHz multiplier capable of delivering more than 100mW at 100GHz is feasible using existing GaAs technology. In fact it is shown that there is potential to deliver this power level for an incident level of about 10mW at 25GHz.     

Spatial distribution of lead in human primary teeth as a biomarker of pre- and neonatal lead exposure

Lead remains one of the most hazardous toxins in our environment. Because the toxic effects of lead are most prominent during early development, it is important to develop a suitable biomarker for lead exposure during the pre- and neonatal periods. In the present study, the spatial distribution of lead was measured in the enamel and dentine of ten human primary teeth using laser ablation-inductively coupled plasma-mass spectrometry. The neonatal line, visualized using confocal laser scanning microscopy, was used to demarcate the pre- and postnatal regions of the sample teeth. Lead levels in pre- and postnatally formed enamel and dentine were compared to blood-lead levels measured at birth and one year of age for four of these participants. Mean dentine-lead levels ranged from 0.17+/-0.02 to 5.60+/-1.79 microg/g, and mean enamel-lead levels ranged from 0.04+/-0.01 to 1.47+/-0.20 microg/g. The results of this preliminary study showed that the spatial distribution of lead in dentine reflected the blood-lead levels. The present study demonstrates a methodology where the spatial distribution of lead in the dentine of human primary teeth may be used to obtain temporal information of environmental lead exposure during the pre- and neonatal periods.     

Impact of dissolved organic matter on colloid transport in the vadose zone: deterministic approximation of transport deposition coefficients from polymeric coating characteristics

Although numerous studies have been conducted to discern colloid transport and stability processes, the mechanistic understanding of how dissolved organic matter (DOM) affects colloid fate in unsaturated soils (i.e., the vadose zone) remains unclear. This study aims to bridge the gap between the physicochemical responses of colloid complexes and porous media interfaces to solution chemistry, and the effect these changes have on colloid transport and fate. Measurements of adsorbed layer thickness, density, and charge of DOM-colloid complexes and transport experiments with tandem internal process visualization were conducted for key constituents of DOM, humic (HA) and fulvic acids (FA), at acidic, neutral and basic pH and two CaCl₂ concentrations. Polymeric characteristics reveal that, of the two tested DOM constituents, only HA electrosterically stabilizes colloids. This stabilization is highly dependent on solution pH which controls DOM polymer adsorption affinity, and on the presence of Ca⁺² which promotes charge neutralization and inter-particle bridging. Transport experiments indicate that HA improved colloid transport significantly, while FA only marginally affected transport despite having a large effect on particle charge. A transport model with deposition and pore-exclusion parameters fit experimental breakthrough curves well. Trends in deposition coefficients are correlated to the changes in colloid surface potential for bare colloids, but must include adsorbed layer thickness and density for sterically stabilized colloids. Additionally, internal process observations with bright field microscopy reveal that, under optimal conditions for retention, experiments with FA or no DOM promoted colloid retention at solid-water interfaces, while experiments with HA enhanced colloid retention at air-water interfaces, presumably due to partitioning of HA at the air-water interface and/or increased hydrophobic characteristics of HA-colloid complexes.     

Quality of Fresh-cut Apple Slices as Affected by Low-dose Ionizing Radiation and Calcium Ascorbate Treatment

ABSTRACT: Although ionizing radiation effectively inactivates food-borne bacterial pathogens in fresh-cut fruits and vegetables, it may adversely affect product quality. In this study, the effects of calcium ascorbate (CaA) and ionizing radiation on quality of 'Gala' apple slices under modified atmosphere packaging were investigated. 'Gala' apple slices, treated with water or 7% CaA followed by either nonirradiation (0 kGy) or irradiation at 0.5 and 1.0 kGy, were stored at 10°C for up to 3 wk. The titratable acidity, pH, firmness, ascorbic acid content, color, and microflora population were measured weekly throughout storage. Irradiation did not affect titratable acidity and pH of sliced apples. Fruit slices softened during irradiation and storage, but this decrease in firmness during storage was reduced by the CaA treatment. Although the ascorbic acid content of apple slices treated with CaA decreased rapidly during storage, the ascorbic acid content was always higher in those treated samples than in the apple slices treated with water. Irradiation decreased both L * and hue values of apple slices. Hue values decreased during the entire storage period while L * increased during the 1st wk of storage, then decreased between 1 to 3 wk of storage. CaA increased L * and hue values of apple slices, suggesting CaA reduced browning, even in irradiated samples. The microflora population of apples slices was not affected by CaA, and CaA treatment did not alter the reduction in microflora by irradiation. The combination of CaA and irradiation enhanced microbial food safety while maintaining quality of fresh-cut apple slices.     

Investigation of the mechanical and thermal fatigue properties of hybrid sol–gel coatings applied to AA2024 substrates

This research article reports on the response of various hybrid sol–gel materials when applied as coatings to pre-treated bare AA2024 substrates, to mechanical indentation and cyclic thermal stimuli, in order to determine their usefulness in aeronautical applications. Three groups of hybrid sol–gel-coated samples were prepared using various organosilanes and transition metal oxides. The characterization of the materials revealed that the presence of the organic functionalities, especially the methacrylate group, has a noticeable effect on the mechanical response of the hybrid coatings, in particular their flexibility. The presence of methacrylate group in the cured material gives it ability to flex which influenced the thermal fatigue characteristics of the coatings which are able to withstand the cyclic temperature regimes of 82 ± 3 to ?37 ± 3°C over 25 2 h cycles. This capability to maintain substrate protection is reflected in the corrosion resistance of the coatings as measured using electrochemical impedance spectroscopy and accelerated exposure testing. This result is important, as it shows that hybrid sol–gel materials can be used in applications where protecting a metal or ally substrate is paramount, especially in thermally volatile environments.     

Examining the preparation and characterization of coatings based on linear aromatic terpoly(methoxy‐cyanurate‐thiocyanurate)s

Two series of terpoly(methoxy‐cyanurate‐thiocyanurate)s based on thiodiphenol and dithiodiphenyl sulfide and on dihydroxydiphenyl ether and dithiodiphenyl ether, were prepared in good yield and purity and fully characterized. Most of the resulting polymers, formed at room temperature using phase transfer catalysis, can be cast into films with good resilience and thermal stability (some examples suffer practically no mass loss when held isothermally at 190 °C and only display appreciable losses when held continuously at 225 °C). Char yields of 53%?61% are achieved in nitrogen depending on backbone structure. Some problems were encountered with solubility, particularly with copolymers, which limited molecular weight analysis, but values of M_n = 8000–13 000 g mol^?1 were obtained for the polymers based on thiodiphenol and dithiodiphenyl sulfide, and M_n = 5000–13 000 g mol^?1 for the polymers based on dihydroxydiphenyl ether and dithiodiphenyl ether. DSC reveals polymerization exotherms with maxima at 184–207 °C (ΔH_p = 43–59 kJ mol^?1), which are believed to be due to isomerization of the cyanurate to the isocyanurate (activation energies span 159–195 kJ mol^?1). Molecular simulation shows that diphenylether and diphenylsulfide display very similar conformational energy surfaces and would therefore be expected to adopt similar conformations, but the diphenylsulfide offers less resistance to deformations that increase the proximity of the two phenyl rings and results in more resilient films. © 2013 Society of Chemical Industry     

The World of Michael Fried's Antiquity

Antiquity occupies a surprisingly central role in Michael Fried's account of contemporary art photography. More specifically, on Fried's account, photographs of antiquity by Thomas Struth and Patrick Faigenbaum stand at the vanguard of contemporary photographic practice. This essay examines the place of these photographs in Fried's work. The essay suggests that close attention to them can illuminate not only unclear turns in Fried's otherwise stunning argument, but also our understanding of the phenomenology of ‘beholding’ in antiquity, a problem that recent work in ancient aesthetics has made considerably more philosophically fraught.     

'Unfinished Business': Neoliberal Planning Reform in Australia

This paper reviews the recent and contemporary neoliberal reform agendas that have sought a reduced role for planning in Australia. Our aim is to describe these reform paths and to theorise their broader implications for urban governance in Australia. Our analysis focuses on two initiatives: first, the broad reform framework embodied in National Competition Policy that is now affecting planning regulation at the state level; and second, the new vision for a standardised development control system that has been put forward by the Property Council of Australia. As we will show, neoliberal reforms have the potential both to reduce the possibility for spatial regulation and also to undermine the other recent reform agendas that have sought a positive transformation of planning; namely, community democratic movements and environmentalism.