Dual Wide Band Circularly Polarized Microstrip Patch Antenna with Offset Feed

Wireless Personal Communications - A compact, dual band circularly polarized antenna has been proposed and investigated. It has been designed with single feed and has simple structure. The antenna...     

Resistance Compression Networks for Radio-Frequency Power Conversion

A limitation of many high-frequency resonant inverter topologies is their high sensitivity to loading conditions. This paper introduces a new class of matching networks that greatly reduces the load sensitivity of resonant inverters and radio frequency (RF) power amplifiers. These networks, which we term resistance compression networks, serve to substantially decrease the variation in effective resistance seen by a tuned RF inverter as loading conditions change. We explore the operation, performance characteristics, and design of these networks, and present experimental results demonstrating their performance. Their combination with rectifiers to form RF-to-dc converters having narrow-range resistive input characteristics is also treated. The application of resistance compression in resonant power conversion is demonstrated in a dc-dc power converter operating at 100MHz     

SrCaO Protective Layer for High-Efficiency PDPs

The sustain pulse voltage of the panel for 66-kPa Ne + Xe (5%-30%) is 20%-40% lower with a Sr_0.62Ca_0.38O protective layer than with a MgO protective layer. At a normal sustain voltage of 160-200 V, the luminous efficiency of the panel with the Sr_0.62 Ca_0.38O protective layer for Xe (30%) is about twice as high as with the MgO protective layer for Xe (10%). The luminances of these panels are almost the same. This high efficiency at normal sustain pulse voltage and normal luminance is obtained through the combined use of the Sr_0.62Ca_0.38O protective layer and high Xe content. With regard to ion bombardment, the Sr_0.62Ca_0.38O film has a 4.5 times longer life than SrO film and nearly 80% of the life of MgO film. We also calculated the values of theoretical secondary electron emission yield gamma_imin of MgO, SrO, and CaO without energy bands in the band gap for rare gas ions and found that [ gamma_imin of MgO] les [gamma_imin of CaO] < [gamma_imin of SrO] except for the one case with He. The breakdown voltage decreases with higher gamma_imin values. As expected, the discharge voltage of the panel is much lower with the SrO protective layer than with the MgO protective layer. The discharge voltages of the panels with Sr_0.62Ca_0.38O and SrO protective layers are almost the same. These findings show that the life of the SrO protective layer can be made 4.5 times longer without any increase in the discharge voltage by adding CaO (40 at.%)     

The Interaction Force Between a Permanent Magnet and a Superconducting Ring

The interaction force between a small magnet and a superconducting ring in assumptions of the Meissner state was analyzed using the dipole-dipole interaction model. Two configurations were evaluated: the vertical configuration when the magnetic moment lies parallel to the symmetry axis of the ring and the horizontal when it is perpendicular. The levitation force on the magnet increases by decreasing the distance from the center of the ring up to a maximum value and then decreases down to zero when the magnet is exactly at the center of the ring. The levitation force when the magnet is in the horizontal configuration is mostly higher than that when it is in the vertical configuration. Simulation results were compared with experimental results reported in literature.     

Synthesis of sulfur-doped ZnO nanowires by electrochemical deposition

Sulfur-doped zinc oxide (ZnO) nanowires have been successfully synthesized by an electric field-assisted electrochemical deposition in porous anodized aluminum oxide template at room temperature. X-ray diffraction and the selected area electron diffraction results show that the as-synthesized nanowires are single crystalline and have a highly preferential orientation. Transmission electron microscopy observations indicate that the nanowires are uniform with an average diameter of 70 nm and length up to several tens of micrometers. X-ray photoelectron spectroscopy further reveals the presence of S in the ZnO nanowires. Room-temperature photoluminescence is observed in the doped ZnO nanowires, which exhibits a violet emission and blue emissions besides the typical photoluminescence spectrum of a single crystal ZnO.     

A low magnetic field gyrotron—gyro-magnetron

A gyrotron device operating at a substantially reduced magnetic field is proposed. The operating beam voltage is moderately low and the waveguide circuit resembles the anode block of a conventional magnetron. The dispersion relationship is given. A proof of principle experiment is suggested.     

Achieving time-of-flight mobilities for amorphous organic semiconductors in a thin film transistor configuration

We observe bulk-like hole transport in amorphous organic semiconductors in a thin film transistor (TFT) configuration. Five different organic hole transporters (HTs) commonly used in organic light-emitting diodes are investigated. When these HTs are deposited on SiO₂ gate dielectric layer, the TFT mobilities are 1–2 orders of magnitude smaller than those obtained from bulk films (3–8 μm) using time-of-flight (TOF) technique. The reduction of hole mobilities can be attributed to the interactions between the organic HTs and the polar SiO bonds on the gate dielectric layer. Detailed temperature dependence studies, employing the Gaussian disorder model, indicate that the SiO₂ gate dielectric contributes between 60 and 90 meV of energetic disorder in the charge hopping manifold. Besides SiO₂ gate dielectric, similar effects can also be observed for other polar insulators including polymeric PMMA and BCB, or HMDS-modified SiO₂. However, when a common non-polar polymer, polystyrene (PS), is employed as the dielectric layer, the dipolar energetic disorder becomes negligible. Holes effectively experience bulk-like transport on the PS gate dielectric surface. TFT mobilities extracted from all five organic HTs are in excellent agreements with TOF mobilities. The present study should have broad applications in the transport characterization of amorphous organic semiconductors.     

Use of linear programming for dynamic subcarrier and bit allocation in multiuser OFDM

An adaptive subcarrier allocation and an adaptive modulation for multiuser orthogonal frequency-division multiplexing (OFDM) are considered. The optimal subcarrier and bit allocation problems, which are previously formulated as nonlinear optimizations, are reformulated into and solved by integer programming (IP). A suboptimal approach that performs subcarrier allocation and bit loading separately is proposed. It is shown that the subcarrier allocation in this approach can be optimized by the linear-programming (LP) relaxation of IP, while the bit loading can be performed in a manner similar to a single-user OFDM. In addition, a heuristic method for solving the LP problem is presented. The LP-based suboptimal and heuristic algorithms are considerably simpler to implement than the optimal IP, plus their performances are close to those of the optimal approach.     

Development of a standing style transfer system "ABLE" for disabled lower limbs

We have developed a standing style transfer system, or "ABLE," for a person with disabled legs. It allows travel in a standing posture even on uneven ground, a standing up motion from a chair, and allows the stairs. ABLE consists of three modules: a pair of telescopic crutches, a powered lower extremity orthosis, and a pair of mobile platforms. We present here the conceptual design of ABLE and the motion of each module. Cooperative operations using the three modules are discussed through simulations. The standing up motion from a chair and ascending the stairs, however, have problems with adaptability to the environment and safety, because it executes the movement that has till now relied on telescopic crutches. To solve these problems, we propose a new motion technique and compare it with the previous one. In this paper, some experimental results are also presented.     

Efficient Group-Based Multimedia-on-Demand Service Delivery in Wireless Networks

Recently, an upsurge of interest has been observed in providing multimedia on-demand (MoD) services to mobile users over wireless networks. Nevertheless, due to the rapidly varying nature of mobile networks and the scarcity of radio resources, the commercial implementation is still limited. This paper presents an efficient group-based multimedia-on-demand (GMoD) service model over multicast-enabled wireless infrastructures, where users requesting the same content are grouped and served simultaneously with a single multicast stream. The grouping is fulfilled through a process named "batching". An analytical model is derived to analyse a timeout-based batching scheme with respect to the tradeoff between user blocking probability and reneging probability. Based on the deduced analytical model, an optimal timeout-based batching scheme is proposed to dynamically identify the optimal tradeoff point that maximizes the system satisfaction ratio given a particular system status. The proposed scheme is evaluated by means of simulation and compared with two basic batching schemes (timeout-based, size-based), and two hybrid ones (combined-for-profit, combined-for-loss). The simulation results demonstrate the proposed approach can ensure significant gains in terms of user satisfaction ratio, with low reneging and blocking probabilities