A Patterned 3D Silicon Anode Fabricated by Electrodeposition on a Virus‐Structured Current Collector

Electrochemical methods were developed for the deposition of nanosilicon onto a 3D virus‐structured nickel current collector. This nickel current collector is composed of self‐assembled nanowire‐like rods of genetically modified tobacco mosaic virus (TMV1cys), chemically coated in nickel to create a complex high surface area conductive substrate. The electrochemically depo­sited 3D silicon anodes demonstrate outstanding rate performance, cycling stability, and rate capability. Electrodeposition thus provides a unique means of fabricating silicon anode materials on complex substrates at low cost.     

A 6.5-J flashlamp-pumped Ti:Al2O3 laser

A flashlamp-pumped Ti:A₂O₃ oscillator has delivered 6.5 J per pulse at 800 nm under long-pulse extraction conditions. The device was designed for efficient short-pulse (2-3 ns) amplification to the multijoule energy level. To date, a peak stored energy in excess of 5 J has been obtained and is available for short-pulse extraction studies. The design and resulting characterization of this laser are discussed. The results show that the energy available for short-pulse extraction is limited by the flashlamp pumping time     

Methodology for Small-Signal Model Extraction of AlGaN HEMTs

Both large- and small-periphery AlGaN high- electron mobility transistors (HEMTs) will find applications in microwave systems from 2 to 40 GHz because of their superior power handling capability. A self-consistent approach is presented for the linear model's parameter extraction from measured S-parameters. The model for parasitics is selected to reflect loading from both the probe pads and the interconnect regions, including the air bridges. The objective is to accurately extract intrinsic model parameters as the device periphery is increased from 50 mum to 1 mm and to isolate the effects of device layouts, including air bridging the source regions. To accurately extract the shunt and series parasitics, the device must be represented in its ON- and OFF-states determined by the gate and drain bias. The intrinsic device capacitances are not negligible in the forward and beyond-pinchoff reverse bias states at zero drain bias and must be accounted for. With these corrections to the measured S-parameters, consistent results for the intrinsic device parameters are obtained with both small- and large-periphery AlGaN HEMTs.     

Effect of exercise and pre-slaughter stress on pork muscle characteristics

The effects of exercise, stress and chill temperature on pork muscle characteristics were studied in a 3 × 2 × 2 factorial experiment in which treatments were assigned to blocks made up of six pigs of the same sex from the same litter. Pigs were fed a corn-soybean meal diet with the two littermate pigs on each treatment fed together. Treatments were (1) a control group receiving no exercise and fed in an 8 m(2) pen; (2) a treatment group fed in an 8 m(2) pen and driven 1·6 km/day for 100 days prior to slaughter; and (3) a treatment group fed in pens with 40 m(2) floor space with feeders placed 5 m from their waterers. When the animals averaged approximately 105 kg in weight, one animal from each pair treated alike was subjected to standardized stress. After slaughter, one side was chilled at 2-3°C and the other at 13-15°C for 24 h. Both sides were then chilled at 2-3°C for an additional 24 h. Exercise did not affect average daily gain (ADG), feed efficiency, yield of total wholesale cuts, muscle pH, protein solubility, fiber diameter and sarcomere length of the Longissimus dorsi (LD) and Quadriceps femoris (QF) muscles or the tenderness of the QF muscle. Exercise decreased backfat thickness and the subjective tenderness of the LD muscle. The effects of stress on the characteristics evaluated were consistent with those that have been previously reported. Chilling temperature and interactions involving chilling temperature did not affect any of the characteristics studied. No exercise × stress interactions were observed. Protein solubility values indicated that pale, soft exudative (PSE) muscle was not a factor in any of the treatments. It was concluded that exercise will produce leaner carcasses but less tender muscle and that exercise will not counteract the effects of pre-slaughter stress.     

Power rail logic: a low power logic style for digital GaAs circuits

This paper describes a new logic style called Power Rail Logic (PRL), which is compatible with direct-coupled FET logic (DCFL) circuits. Multiplexors, latches, flip-flops, and exclusive-OR gates can be built using this logic style. Compared to DCFL, PRL uses fewer transistors, has larger noise margins, and up to 40% lower power-delay products. A test chip containing 32-b barrel shifters designed in DCFL and in PRL was successfully fabricated and tested. Test results are given for both circuits     

Current Variability in Si Nanowire MOSFETs Due to Random Dopants in the Source/Drain Regions: A Fully 3-D NEGF Simulation Study

In this paper, we study the impact of random discrete dopants in the source/drain (S/D) leads on the current variability of a gate-all-around Si nanowire transistor. Due to the strong inhomogeneities of the self-consistent electrostatic potential, a fully 3D real-space nonequilibrium Green's function (NEGF) formalism is used. N-channel transistors with random discrete donors in the S/D regions varying in both numbers and locations have been simulated. We have studied the impact of quasi-bound (QB) states and transmission resonances associated with the attractive potential of the donors on the screening of the impurities and on the current transport. The convergence of the coupled 3D Poisson-NEGF equations for narrow wires with discrete dopants is cumbersome due to the quasi-discrete nature of QB states and resonances of the attractive impurity potential. We present a robust solution strategy dealing with the convergence challenges. Large variations in the on-current and modest variations in the subthreshold slope are observed in the I _D-V _G characteristics when comparing devices with microscopically different discrete dopant configurations. We have also estimated the access resistance associated with the random dopant regions in the source and the drain leads and find very good agreement with the resistance estimated from the bulk silicon mobility at the same doping concentration.     

On limit cycles inn-order direct-form digital filters

The relationship between the elements in the vector of any limit cycle due to rounding in ann-order direct-form digital filter is established. Some bounds on the elements in such vectors are also determined. Sufficient conditions for the accessibility of period-r limit cycles due to rounding inn-order digital filters are presented.     

Crude protein and rumen undergradable protein effects on reproduction and lactation performance of Holstein cows

We conducted a study to determine the effects of excess dietary crude protein (CP) and rumen undegradable protein (RUP) on reproduction and lactation performance of Holstein cows. During each of three yearly replicates, cows were blocked by previous mature equivalent milk production and randomly assigned at calving (n = 47; partum group) or at 42 +/- 21 d postpartum (n = 134; postpartum group) to the following dietary treatments: 1) ryegrass pasture supplemented with a corn and soybean meal grain mix (high CP, moderate RUP); 2) ryegrass pasture mornings and corn silage evenings, supplemented with grain as in diet 1 (moderate CP, moderate RUP control diet), and 3) ryegrass pasture mornings and corn silage evenings, supplemented with a grain mix containing corn, soybean meal, corn gluten meal, and blood meal (moderate CP, high RUP). Dietary CP and RUP concentrations were approximately 23.1, 5.8; 17.7, 5.0; and 17.2, 6.8% of dry matter for diets 1 to 3, respectively. Plasma urea N concentrations were highest in cows fed diet 1 (25.0 mg/dl), intermediate in cows on diet 2 (20.1 mg/dl), and lowest in cows on diet 3 (18.5 mg/dl). Cows fed excess dietary protein (diet 1) exhibited lower first breeding pregnancy rates (24.1 vs. 41.0%) and lower overall pregnancy rates (53.4 vs. 75.4%) than did cows fed diet 2, increasing time nonpregnant by an average of 15.1 d per cow. Reproductive performance was similar between cows fed diets 2 and 3. Mean fat-corrected milk (FCM) yield was not affected by protein concentration (diet 1 vs. 2); however, partum group cows that received supplemental RUP (diet 3) produced more 3.5% FCM than controls in early lactation. Feeding grain diets that contained excess dietary protein impaired the reproductive performance of dairy cows grazing ryegrass.     

Application of the integral equation method of smoothing to random surface scattering

The integral equation method of smoothing (IEMS) is applied to the magnetic field integral equation (MFIE) weighted by the exponentialexp (jk_{1}zeta)wherezetais the stochastic surface height. An integral equation in coordinate space for the average of the product of the surface current and the exponential factor is developed. The exact closed-form solution of this integral equation is obtained based on the specularity of the average scattered field. The complex amplitude of the average scattered field is thus determined by an algebraic equation which clearly shows the effects of multiple scattering on the surface. In addition, it is shown how the incoherent scattered power can be obtained using this method. Comparisons with the Kirchhoff approximation and the dishonest approach are presented, and the first-order smoothing result is shown to be superior to both.     

RF Testing on a Mixed Signal Tester

In this paper, testing of radio frequency (RF) devices with mixed-signal testers is discussed. General purpose automatic test equipment (ATE) will be used. In this paper, a more universal test structure utilizing RF building blocks is proposed. A global positioning system (GPS) device is used as an example to illustrate how to develop the RF test plan with this usage. The test plan developed includes fast, cost-effective and dedicated circuitry.