Investigation of reliability issues in high power laser diode bar packages

As applications continue to demand increasingly higher optical output power and longer lifetime, thermo-mechanical stresses on dissimilar materials interfaced for packaging pose an ever-growing challenge for the realization of a durable system. Particularly important for an epitaxy-down configuration is the die-attachment interface, which is desired to be defect free and stress managed for reliable optical alignment. A knowledge of the changes in the physical defect density and magnitude of the thermo-mechanical stress present in the active region as a function of the fabrication process and aging is crucial to an understanding of the influence of the process parameters and operating conditions on device performance and reliability. In this study, we investigated high power laser diode array packages aged under various conditions. Microscopic defect analyses of the die attachment interface and device stress were carried out using primarily metallography, scanning electron microscopy, scanning acoustic microscopy, microhardness, and micro-Raman spectroscopy. It was noted that the intermetallic compounds and microscopic physical defects at the die attach interface are detrimental to transient heat transfer, and thus, overall package reliability. Using micro-Raman spectroscopy, we found that tensile stress near the bar-package interface increases with aging for the first few hundred hours and then decreases with further aging.     

Power rail logic: a low power logic style for digital GaAs circuits

This paper describes a new logic style called Power Rail Logic (PRL), which is compatible with direct-coupled FET logic (DCFL) circuits. Multiplexors, latches, flip-flops, and exclusive-OR gates can be built using this logic style. Compared to DCFL, PRL uses fewer transistors, has larger noise margins, and up to 40% lower power-delay products. A test chip containing 32-b barrel shifters designed in DCFL and in PRL was successfully fabricated and tested. Test results are given for both circuits     

Current Variability in Si Nanowire MOSFETs Due to Random Dopants in the Source/Drain Regions: A Fully 3-D NEGF Simulation Study

In this paper, we study the impact of random discrete dopants in the source/drain (S/D) leads on the current variability of a gate-all-around Si nanowire transistor. Due to the strong inhomogeneities of the self-consistent electrostatic potential, a fully 3D real-space nonequilibrium Green's function (NEGF) formalism is used. N-channel transistors with random discrete donors in the S/D regions varying in both numbers and locations have been simulated. We have studied the impact of quasi-bound (QB) states and transmission resonances associated with the attractive potential of the donors on the screening of the impurities and on the current transport. The convergence of the coupled 3D Poisson-NEGF equations for narrow wires with discrete dopants is cumbersome due to the quasi-discrete nature of QB states and resonances of the attractive impurity potential. We present a robust solution strategy dealing with the convergence challenges. Large variations in the on-current and modest variations in the subthreshold slope are observed in the I _D-V _G characteristics when comparing devices with microscopically different discrete dopant configurations. We have also estimated the access resistance associated with the random dopant regions in the source and the drain leads and find very good agreement with the resistance estimated from the bulk silicon mobility at the same doping concentration.     

Crude protein and rumen undergradable protein effects on reproduction and lactation performance of Holstein cows

We conducted a study to determine the effects of excess dietary crude protein (CP) and rumen undegradable protein (RUP) on reproduction and lactation performance of Holstein cows. During each of three yearly replicates, cows were blocked by previous mature equivalent milk production and randomly assigned at calving (n = 47; partum group) or at 42 +/- 21 d postpartum (n = 134; postpartum group) to the following dietary treatments: 1) ryegrass pasture supplemented with a corn and soybean meal grain mix (high CP, moderate RUP); 2) ryegrass pasture mornings and corn silage evenings, supplemented with grain as in diet 1 (moderate CP, moderate RUP control diet), and 3) ryegrass pasture mornings and corn silage evenings, supplemented with a grain mix containing corn, soybean meal, corn gluten meal, and blood meal (moderate CP, high RUP). Dietary CP and RUP concentrations were approximately 23.1, 5.8; 17.7, 5.0; and 17.2, 6.8% of dry matter for diets 1 to 3, respectively. Plasma urea N concentrations were highest in cows fed diet 1 (25.0 mg/dl), intermediate in cows on diet 2 (20.1 mg/dl), and lowest in cows on diet 3 (18.5 mg/dl). Cows fed excess dietary protein (diet 1) exhibited lower first breeding pregnancy rates (24.1 vs. 41.0%) and lower overall pregnancy rates (53.4 vs. 75.4%) than did cows fed diet 2, increasing time nonpregnant by an average of 15.1 d per cow. Reproductive performance was similar between cows fed diets 2 and 3. Mean fat-corrected milk (FCM) yield was not affected by protein concentration (diet 1 vs. 2); however, partum group cows that received supplemental RUP (diet 3) produced more 3.5% FCM than controls in early lactation. Feeding grain diets that contained excess dietary protein impaired the reproductive performance of dairy cows grazing ryegrass.     

On limit cycles inn-order direct-form digital filters

The relationship between the elements in the vector of any limit cycle due to rounding in ann-order direct-form digital filter is established. Some bounds on the elements in such vectors are also determined. Sufficient conditions for the accessibility of period-r limit cycles due to rounding inn-order digital filters are presented.     

Sensor allocation in diverse environments

Sensor coverage varies with location due to factors such as weather, terrain, and obstacles. If a field can be partitioned into zones of homogeneous sensing areas, then the area covered by a random deployment of sensors can be optimized by controlling the number of sensors deployed in each zone. This paper provides formulas to directly calculate the optimal sensor partition in runtime asymptotically equal to the number of zones; to determine the minimum sensor count required to achieve a specific coverage threshold; and to bound the maximum increase in coverage over a strategy oblivious to differences in sensing areas. Results show that this bound is no greater than 13% for a field with two zones. While the analytical solutions assume that each zone is covered independently, sensors are allowed to affect neighboring zones in simulations. Nevertheless, the simulation results support the optimality of the solutions.     

A 60-W high-beam-quality single-oscillator copper vapor laser

We report dramatic improvements (up to four times) in the generation of high-beam-quality (HBQ) output power from copper vapor lasers (CVLs) by using tailored HCl-H₂-Ne buffer gas mixtures. Up to 60 W of HBQ power was obtained from a 38-mm bore-diameter CVL at a pulse repetition frequency of 12 kHz and 50 W at 22 kHz. This improvement in power capability is attributable to the modification of the spatio-temporal gain characteristics of the laser when using the new buffer gas mixture     

Application of the integral equation method of smoothing to random surface scattering

The integral equation method of smoothing (IEMS) is applied to the magnetic field integral equation (MFIE) weighted by the exponentialexp (jk_{1}zeta)wherezetais the stochastic surface height. An integral equation in coordinate space for the average of the product of the surface current and the exponential factor is developed. The exact closed-form solution of this integral equation is obtained based on the specularity of the average scattered field. The complex amplitude of the average scattered field is thus determined by an algebraic equation which clearly shows the effects of multiple scattering on the surface. In addition, it is shown how the incoherent scattered power can be obtained using this method. Comparisons with the Kirchhoff approximation and the dishonest approach are presented, and the first-order smoothing result is shown to be superior to both.     

Use of highly overcoupled couplers to detect shifts in Braggwavelength [strain sensors]

The authors present a technique for detecting Bragg wavelength shifts using highly overcoupled couplers (HOCC). An HOCC of 60%/nm was fabricated with 626 cycles. With our HOCC, a 5 μW LED and a 95% reflective Bragg grating we were able to detect 10 μstrain (Δλ=0.01 nm)