Direct-Ink-Writing of Electroactive Polymers for Sensing and Energy Storage Applications

Considering the high levels of materials used in the fields of electronics and energy storage systems, it is increasingly necessary to take into consideration environmental impact. Thus, it is important to develop devices based on environmentally friendlier materials and/or processes, such as additive manufacturing techniques. In this work, poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) are prepared by direct-ink-writing (DIW) by varying solvent evaporation temperature and fill density percentage. Different morphologies for both polymers are obtained, including dense films and porous membranes, as well as different electroactive β-phase content, thermal and mechanical properties. The dielectric constant and piezoelectric d₃₃ coefficient for dense films reaches up to 16 at 1 kHz and 4 pC N⁻¹, respectively for PVDF-HFP with a fill density of 80 and a solvent evaporation temperature of 50 °C. Porous structures are developed for battery separator membranes in lithium-ion batteries, with a highest ionic conductivity value of 3.8 mS cm⁻¹ for the PVDF-HFP sample prepared with a fill density of 100 and a solvent evaporation temperature of 25 °C, the sample showing an excellent cycling performance. It is demonstrated that electroactive films and membranes can be prepared by direct-ink writing suitable for sensors/actuators and energy storage systems.     

Cu/SBA-15 as adsorbent for propane/propylene separation

Samples of mesoporous silica SBA-15 were prepared under hydrothermal conditions where Cu cations were incorporated to the structure by impregnation in order to compare the adsorption behavior in the presence and absence of this element. The adsorption/desorption equilibrium isotherms of propylene, propane, and N₂ were measured to evaluate their usefulness in the propane/propylene separation. All the adsorption isotherms of SBA-15 measured in the absence of Cu cations were described by the Freundlich equation, while the adsorption isotherms of propane on Cu/SBA-15 were better represented by the Henry equation and those of propylene were satisfactorily described by the Langmuir model in the range P < 100 Torr. The adsorption uptake of propylene increased and that of propane decreased in Cu/SBA-15 as compared to the amounts observed in the SBA-15 sample. The presence of Cu atoms in the adsorbent lattice increased the selectivity towards propylene. Under some working conditions the adsorbed amount of propylene in Cu/SBA-15 sample was totally reversible and the propane uptake, negligible.     

In vivo aging of gutta‐percha dental cone

Gutta‐percha cone is the most widely used material for root canal filling. The in vivo aging of this cone focus on the degradation of its main organic component, trans‐1,4‐polyisoprene, was studied. Aged cones (25 samples) from 2 to 30 years of root canal filling were extracted from different patients in the occasion of retreatment by mechanical way. The information about the aging time was given by the patients. Gel‐permeation chromatography (GPC) and infrared spectroscopy (FTIR) were the analytical techniques used. Polyisoprene degrades with time of aging, but in a slow process. Decrease in polymer molar mass from 5.7 × 10⁵ to 1.7 × 10⁵ g/mol was observed in polyisoprene from cone after 30 years of root canal filling and inside a noninfected tooth. In tooth with caries and periodontal infection, the decrease in molar mass is higher (4.6 × 10⁴ g/mol in cone with 10 years of aging). The production of carbonyl and hydroxyl groups in the aged material indicates that the process is oxidative, even in closed teeth. In these cases, the oxygen could be provided from tissue fluid. The degradation mechanism is complex and depends on many factors, besides time of root canal filling. The dental problem caused by the aging could be the production and migration of cytotoxic substances to periodontal ligament and the reduction on the canal sealing property due to the polymer weight loss. Both of them could contribute to the root canal treatment failure. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100:4082–4088, 2006     

Semi-interpenetrating polymer networds produced with polyethylene terephthalate oligomer and unsaturated polyester resin

A series of semi-interpenetrating polymer networks (semi-IPN's) based on different compositions of an acyclic polyethylene terephthalate oligomer and unsaturated polyester resin (UP) were prepared. The oligomer was dissolved in the resin containing styrene crosslinker. Later this mixture was crosslinked at room temperature using methyl ethyl ketone peroxide catalyst and cobalt naphtanate as promoter. The tensile strength of the IPN's decreases as the concentration of oligomer increases, whereas, elongation to break increases. A characterization of the oligomer used is also presented.     

Calibration Model for Water Distribution Network Using Pressures Estimated by Artificial Neural Networks

The success of hydraulic simulation models of water distribution networks is associated with the ability of these models to represent real systems accurately. To achieve this, the calibration phase is essential. Current calibration methods are based on minimizing the error between measured and simulated values of pressure and flow. This minimization is based on a search of parameter values to be calibrated, including pipe roughness, nodal demand, and leakage flow. The resulting hydraulic problem contains several variables. In addition, a limited set of known monitored pressure and flow values creates an indeterminate problem with more variables than equations. Seeking to address the lack of monitored data for the calibration of Water Distribution Networks (WDNs), this paper uses a meta-model based on an Artificial Neural Network (ANN) to estimate pressure on all nodes of a network. The calibration of pipe roughness applies a metaheuristic search method called Particle Swarm Optimization (PSO) to minimize the objective function represented by the difference between simulated and forecasted pressure values. The proposed method is evaluated at steady state and over an extended period for a real District Metering Area (DMA), named Campos do Conde II, and the hypothetical network named C-town, which is used as a benchmark for calibration studies.     

Analytical ray tracing system: Introducing art, a C-library designed for seismic applications

Ray tracing technique is an important tool not only to forward but also for inverse problems in Geophysics, which most of the seismic processing steps depend on. However, implementing ray tracing codes can be very time consuming. This article presents a computer library to trace rays in 2.5D media composed by a stack of layers. The velocity profile inside each layer is such that the eikonal equation can be analytically solved. Therefore, the ray tracing within such profile is made fast and accurate. The great advantage of an analytical ray tracing library is the numerical precision of the quantities computed and the fast execution of the implemented codes. Even though ray tracing programs exist for a long time, for example the seis88 package by ?ervený, most of those programs use a numerical approach to compute the ray. Regardless of the fact that numerical methods can solve more general problems, the analytical ones could be part of a more sophisticated simulation process, where the ray tracing time is completely relevant. We demonstrate the feasibility of our codes using several examples (Miqueles et al., 2013)  [1]. The library can also be used for other applications besides seismic, e.g., optics and tomography.     

Fitting polynomial surfaces to triangular meshes with Voronoi squared distance minimization

This paper introduces Voronoi squared distance minimization (VSDM), an algorithm that fits a surface to an input mesh. VSDM minimizes an objective function that corresponds to a Voronoi-based approximation of the overall squared distance function between the surface and the input mesh (SDM). This objective function is a generalization of the one minimized by centroidal Voronoi tessellation, and can be minimized by a quasi-Newton solver. VSDM naturally adapts the orientation of the mesh elements to best approximate the input, without estimating any differential quantities. Therefore, it can be applied to triangle soups or surfaces with degenerate triangles, topological noise and sharp features. Applications of fitting quad meshes and polynomial surfaces to input triangular meshes are demonstrated.     

A 2D algorithm with asymmetric workload for the UPC conjugate gradient method

This paper examines four different strategies, each one with its own data distribution, for implementing the parallel conjugate gradient (CG) method and how they impact communication and overall performance. Firstly, typical 1D and 2D distributions of the matrix involved in CG computations are considered. Then, a new 2D version of the CG method with asymmetric workload, based on leaving some threads idle during part of the computation to reduce communication, is proposed. The four strategies are independent of sparse storage schemes and are implemented using Unified Parallel C (UPC), a Partitioned Global Address Space (PGAS) language. The strategies are evaluated on two different platforms through a set of matrices that exhibit distinct sparse patterns, demonstrating that our asymmetric proposal outperforms the others except for one matrix on one platform.     

Reaction kinetics modeling and thermal properties of epoxy–amines as measured by modulated‐temperature DSC. II. Network‐forming DGEBA + MDA

Reaction‐induced vitrification takes place in the network‐forming epoxy–amine system diglycidyl ether of bisphenol A (DGEBA) + methylenedianiline (MDA) when the glass‐transition temperature (T_g) rises above the cure temperature (T_cure). This chemorheological transition results in diffusion‐controlled reaction and can be followed simultaneously with the reaction rate in modulated‐temperature DSC (MTDSC). To predict the effect of T_cure and the NH/epoxy molar mixing ratio (r) on the reaction rate in chemically controlled conditions, a mechanistic approach was used based on the nonreversing heat flow and heat capacity MTDSC signals, in which the reaction steps of primary (E_1OH = 44 kJ mol^?1) and secondary amine (E_2OH = 48 kJ mol^?1) with the epoxy–hydroxyl complex predominating. The diffusion factor DF as defined by the Rabinowitch approach expresses whether the chemical reaction rate or the diffusion rate determines the overall reaction rate. A model based on the free volume theory together with an Arrhenius temperature dependency was used to calculate the diffusion rate constant in DF as a function of conversion (x) and T_cure. The relation between x, r, and T_g, needed in this model, can be predicted with the Couchman equation. An experimental approximation for DF is the mobility factor DF* obtained from the heat capacity signal at a modulation frequency of 1/60 Hz, normalized for the effect of the reaction heat capacity in the liquid state and the change in C_p in the glassy region with x and T_cure. In this way, an optimized set of diffusion parameters was obtained that, together with the optimized kinetic parameters set, can predict the reaction rate for different cure schedules and for stoichiometric and off‐stoichiometric mixtures. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2814–2833, 2004     

Calmodulin Supports TRPA1 Channel Association with Opioid Receptors and Glutamate NMDA Receptors in the Nervous Tissue

Transient receptor potential ankyrin member 1 (TRPA1) belongs to the family of thermo TRP cation channels that detect harmful temperatures, acids and numerous chemical pollutants. TRPA1 is expressed in nervous tissue, where it participates in the genesis of nociceptive signals in response to noxious stimuli and mediates mechanical hyperalgesia and allodynia associated with different neuropathies. The glutamate N-methyl-d-aspartate receptor (NMDAR), which plays a relevant role in allodynia to mechanical stimuli, is connected via histidine triad nucleotide-binding protein 1 (HINT1) and type 1 sigma receptor (σ1R) to mu-opioid receptors (MORs), which mediate the most potent pain relief. Notably, neuropathic pain causes a reduction in MOR antinociceptive efficacy, which can be reversed by blocking spinal NMDARs and TRPA1 channels. Thus, we studied whether TRPA1 channels form complexes with MORs and NMDARs that may be implicated in the aforementioned nociceptive signals. Our data suggest that TRPA1 channels functionally associate with MORs, delta opioid receptors and NMDARs in the dorsal root ganglia, the spinal cord and brain areas. These associations were altered in response to pharmacological interventions and the induction of inflammatory and also neuropathic pain. The MOR-TRPA1 and NMDAR-TRPA1 associations do not require HINT1 or σ1R but appear to be mediated by calcium-activated calmodulin. Thus, TRPA1 channels may associate with NMDARs to promote ascending acute and chronic pain signals and to control MOR antinociception.