Managing supply systems with partial information on shipment locations

This paper studies a supply system for a retailer who orders a single product from one manufacturer. Orders filled by the manufacturer pass through multiple transportation stages before reaching the retailer. Each stage represents either a physical location or a step in the delivery process. The lead time for a new order depends on the location of shipments against prior orders in transit. Shipments are not allowed to cross over in time. Thus, the movement of each shipment depends on the movements of shipments ahead of it and the resulting congestion. The retailer is able to track shipments as they move through the transportation channel. The retailer adopts an ordering policy that minimises the sum of his one-period holding and shortage costs, using available status information of shipments already in transit. The case where practical constraints prevent the retailer from obtaining a complete status of shipments at all stages in the transportation channel is considered. The methodology developed evaluates the value of partial shipment tracking information, and uses it to determine the optimal placement of a limited number of tracking devices. The methodology can also be used to evaluate the cost–benefit of placing additional tracking devices in the supply system.     

Evolution or revolution: where next for impact assessment?

Impact assessment (IA) has become one of the most prevalent environmental policy instruments today. Its introduction under the National Environmental Policy Act (US) in 1969 was revolutionary. Perhaps it is not surprising, then, that such a widely used tool has received its share of criticism, including that it fails to meet some of its fundamental goals. Over the last fifty years, IA has broadened in scope and application and embraced new techniques. It has followed evolved, but has not changed fundamentally.

We believe that IA must continue to change to meet the societal and environmental challenges of the 21^st century. But will it be enough for IA to progress through incremental change (evolution), or is a complete overhaul of impact assessment (revolution) needed? We provide some ideas as to what ‘evolution’ and ‘revolution’ may look like, but rather then offering a definitive way forward now, we invite stakeholders to present their thoughts and suggestions at the IAIA19 Annual Conference in Brisbane, which carries the same theme as the title of this article.     

Image registration based on boundary mapping

A new two-stage approach for nonlinear brain image registration is proposed. In the first stage, an active contour algorithm is used to establish a homothetic one-to-one map between a set of region boundaries in two images to be registered. This mapping is used in the second step: a two-dimensional transformation which is based on an elastic body deformation. This method is tested by registering magnetic resonance images to atlas images.     

Temporary bond—debond technology for high‐performance transistors on flexible substrates

Abstract— A processing technology based upon a temporary bond—debond approach has been developed that enables direct fabrication of high‐performance electronic devices on flexible substrates. This technique facilitates processing of flexible plastic and metal‐foil substrates through automated standard semiconductor and flat‐panel tool sets without tool modification. The key to processing with these tool sets is rigidifying the flexible substrates through temporary bonding to carriers that can be handled in a similar manner as silicon wafers or glass substrates in conventional electronics manufacturing. To demonstrate the power of this processing technology, amorphous‐silicon thin‐film‐transistor (a‐Si:H TFT) backplanes designed for electrophoretic displays (EPDs) were fabricated using a low‐temperature process (180°C) on bonded‐plastic and metal‐foil substrates. The electrical characteristics of the TFTs fabricated on flexible substrates are found to be consistent with those processed with identical conditions on rigid silicon wafers. These TFTs on plastic exhibit a field‐effect mobility of 0.77 cm²/V‐sec, on/off current ratio >10⁹ at Vds = 10 V, sub‐threshold swing of 365 mV/dec, threshold voltage of 0.49 V, and leakage current lower than 2 pA/μm gate width. After full TFT‐array fabrication on the bonded substrate and subsequent debonding, the flexible substrate retains its original flexibility; this enables bending of the EPD display without loss in performance.     

Voice Processors Based on the Human Hearing System

A voice processor is a dedicated audio signal-processing chip for mobile phones and personal computers that enables high-performance noise reduction and acoustic echo cancellation for highly noisy environments. The algorithms and hardware underlying these chips' performance are based on the sophisticated operation of the human hearing system.     

Utilising psychophysical techniques to investigate the effects of age,typeface design,size and display polarity on glance legibility

Psychophysical research on text legibility has historically investigated factors such as size, colour and contrast, but there has been relatively little direct empirical evaluation of typographic design itself, particularly in the emerging context of glance reading. In the present study, participants performed a lexical decision task controlled by an adaptive staircase method. Two typefaces, a ‘humanist’ and ‘square grotesque’ style, were tested. Study I examined positive and negative polarities, while Study II examined two text sizes. Stimulus duration thresholds were sensitive to differences between typefaces, polarities and sizes. Typeface also interacted significantly with age, particularly for conditions with higher legibility thresholds. These results are consistent with previous research assessing the impact of the same typefaces on interface demand in a simulated driving environment. This simplified methodology of assessing legibility differences can be adapted to investigate a wide array of questions relevant to typographic and interface designs.

Practitioner Summary: A method is described for rapidly investigating relative legibility of different typographical features. Results indicate that during glance-like reading induced by the psychophysical technique and under the lighting conditions considered, humanist-style type is significantly more legible than a square grotesque style, and that black-on-white text is significantly more legible than white-on-black.     

Optimal number of minimal repairs with cumulative repair cost limit for a two-unit system with failure rate interactions

A discrete replacement model is presented that includes a cumulative repair cost limit for a two-unit system with failure rate interactions between the units. We assume a failure in unit 1 causes the failure rate in unit 2 to increase, whereas a failure in unit 2 causes a failure in unit 1, resulting in a total system failure. If unit 1 fails and the cumulative repair cost till to this failure is less than a limit L, then unit 1 is repaired. If there is a failure in unit 1 and the cumulative repair cost exceeds L or the number of failures equals n, the entire system is preventively replaced. The system is also replaced at a total failure, and such replacement cost is higher than the preventive replacement cost. The long-term expected cost per unit time is derived using the expected costs as the optimality criterion. The minimum-cost policy is derived, and existence and uniqueness are proved.