Colour constancy of vat prints on cotton fabrics

Colour constancy of prints with vat dyes on cotton fabrics was investigated by computing the CMCCON02 colour inconstancy index with the key element CAT02 for chromatic adaptation transform. The results show that the highest changes in colour appearance can be expected when the average daylight is replaced with fluorescent light. If D65 daylight is replaced with some other type of daylight, such as D50 or D55, only minor colour deviations occur which do not substantially change the colour appearance of the prints. The analysis of the influence of the lightness and chromaticity of prints shows that the chromaticity of the samples significantly affects their colour constancy. The change of appearance of the prints with lower chroma because of changed illumination conditions is less probable. The influence of a dye blend composition was also investigated. On average, multi‐coloured dye blends have proved to be more colour constant.     

A kinetic study on the autoxidation of sunflowerseed oil

Unhydrogenated and hydrogenated sunflowerseed oils were exposed to the autoxidation process by sunlight under atmospheric conditions. Experiments were carried out in equal-sized glass, PET (polyethylene terephthalate) polymer, and metal (covered by tin) containers. The reaction time was 30 d, and the reaction course was observed by determining weight changes and peroxide values (PV) of the oil samples at the same time within 2-d intervals. The logarithm of the PV was plotted against time, and straight lines were obtained from the 4th or 6th d. The autoxidation reaction constants were obtained for each oil in each container. When comparing the reaction constants, the unhydrogenated oils autoxidize easily, and the autoxidation reaction occurs faster in sunlight in glass than in the PET polymer container and much faster than in the darkness of the metal container.     

The comprehensive in vitro evaluation of eight different calcium phosphates: Significant parameters for cell behavior

Eight different calcium phosphate nanoparticles, namely bovine bone bioapatite calcined at 500, 600, and 700°C, Mg-doped brushite, fluorinated calcium phosphate, Ca-deficient hydroxyapatite, hydroxyapatite, and tricalcium phosphate, were characterized employing physico-chemical methods. Their cytocompatibility was evaluated under human osteoblast-like cell line MG-63 culture conditions in elution media and via the direct interaction of cells with calcium phosphate nanoparticles. The main objective was to determine the correlation of the cell indices with the differently determined physical and chemical parameters of the calcium phosphates. Chemical composition, which contributes toward pH changes, and the calcium ion concentration in the medium appear to make up particularly significant factors; moreover, it was proved that the number of material types represents a further important aspect. In the case of a large number of material types, almost no correlation was determined between the analyzed parameters; however, in the case of a small number of apatite types, several positive correlations were found. It can be concluded that it is not possible to identify any monitored parameters that had a major impact on cell behavior or, at least, such an effect which can be generalized. It appears more likely that cell behavior is affected by the interplay of various parameters.     

Porous polyurethane film fabricated via the breath figure approach for sustained drug release

The breath figure (BF) method is an effective process for fabricating porous polymeric films. In this study, we fabricated porous polymer films from thermoplastic polyurethane (PU) through static BF with CHCl₃ as a solvent under 55–80% relative humidity. The porous PU films were prepared within various pore structures and sizes, which were adjustable, depending on the fabrication conditions. The humidity and exposure time were examined as variable parameters affecting the surface morphology, wettability, and cytotoxicity. Atorvastatin calcium, a hyperlipidemic agent, was loaded into the porous films during the casting process, and the drug-loading and drug-releasing behaviors of the porous PU membranes were evaluated. Approximately 60–80% of the drug was released in 14 days. The films exhibited sustained drug-release performances because of the hydrophobicity and nonbiodegradable nature of PU for perivascular drug administration. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47658.     

Large Eddy Simulation of mixing effects on the course of parallel chemical reactions and comparison with k-? modeling

The way in which reagents are mixed can have a large influence on the product distribution of chemical reactions. To model effects of mixing on various scales on the course of chemical reactions the method of Large Eddy Simulation (LES) of non-premixed, turbulent reactive flows of incompressible fluids is considered in this work. The subgrid modeling of chemical reaction is based on a beta distribution of the mixture fraction in combination with a conditional moment closure based on linear interpolation of local instantaneous reactant concentration values. The predictions obtained with LES are compared with experimental data for fast parallel chemical reactions, the fluid velocity measured using Particle Image Velocity (PIV) technique and the passive tracer concentration measured using the Planar Laser Induced Fluorescence (PLIF) technique. Predictions of the model based on LES are compared as well with results obtained using the non-equilibrium multiple-time-scale mixing model combined with a standard k-? model and employing similar conditional moment closure as LES, applied, however, at larger scale. All comparisons show a very good performance of the model based on LES.     

Characterization of Terebinth Fruit Oil and Optimization of Acidolysis Reaction with Caprylic and Stearic Acids

Characterization of the fatty acid and triacylglycerol composition of terebinth fruit oil and the synthesis of structured lipids (SL) were performed in this study. Interesterification reaction of terebinth fruits oil (Pistacia terebinthus L.) with caprylic acid (CA) and stearic acid (SA) to produce a SL was performed in n-hexane using immobilized sn-1,3 specific lipase from Mucor miehei. The effect of reaction conditions and relationship among them were analyzed by response surface methodology (RSM) with a four-factors five-level central composite rotatable experimental design. The four major factors chosen were enzyme load (10–30 wt% based on substrates), reaction time (7–18 h), reaction temperature (40–60 °C) and substrate mole ratio (terebinth oil:SA:CA 1:1:1–1:1:3). The best fitting quadratic model was determined by regression and backward elimination. Based on the fitted model, the optimal reaction conditions for the incorporation of CA and SA were found to be temperature 50 °C; time 18 h; enzyme load 30 wt%; substrate ratio 1:1:3. Under these optimum conditions, the incorporation of SA and CA could be obtained as 19 and 14%, respectively.     

Photoelectrocatalytic determination of NADH in a flow injection system with electropolymerized methylene blue

It was firstly described that a glassy carbon electrode electropolymerized with methylene blue shows an efficient photoelectrocatalytic activity towards NADH oxidation in a phosphate buffer solution (pH 7.0). In order to perform the photoelectrocatalytic determination of NADH in a flow injection analysis (FIA) system, a home-made flow electrochemical cell with a suitable transparent window for the irradiation of the electrode surface was constructed. The currents obtained from the photoamperometric measurements in the FIA system at optimum conditions (flow rate of carrier solution, 1.3 mL min⁻¹; transmission tubing length, 10 cm; injection volume, 100 μL; and constant applied potential, +150 mV vs. Ag/AgCl) were linearly dependent on the NADH concentration and linear calibration curves were obtained in the range of 1.0 × 10⁻⁷–2.0 × 10⁻⁴ M. The detection limit was found to be 4.0 × 10⁻⁸ M for photoamperometric determination of NADH.     

Vinyl triazole carrying metal‐chelated beads for the reversible immobilization of glucoamylase

Poly(ethylene glycol dimethacrylate–1‐vinyl‐1,2,4‐triazole) [poly(EGDMA–VTAZ)] beads with an average diameter of 100–200 μm were obtained by the copolymerization of ethylene glycol dimethacrylate (EGDMA) with 1‐vinyl‐1,2,4‐triazole (VTAZ). The copolymer hydrogel bead composition was determined by elemental analysis and was found to contain 5 EGDMA monomer units for each VTAZ monomer unit. The poly(EGDMA–VTAZ) beads were characterized by swelling studies and scanning electron microscopy (SEM). The specific surface area of the poly(EGDMA–VTAZ) beads was found 65.8 m²/g. Cu²⁺ ions were chelated on the poly(EGDMA–VTAZ) beads. The Cu²⁺ loading was 82.6 μmol/g of support. Cu²⁺‐chelated poly(EGDMA–VTAZ) beads with a swelling ratio of 84% were used in the immobilization of Aspergillus niger glucoamylase in a batch system. The maximum glucoamylase adsorption capacity of the poly(EGDMA–VTAZ)–Cu²⁺ beads was 104 mg/g at pH 6.5. The adsorption isotherm of the poly(EGDMA–VTAZ)–Cu²⁺ beads fitted well with the Langmuir model. Adsorption kinetics data were tested with pseudo‐first‐ and second‐order models. The kinetic studies showed that the adsorption followed a pseudo‐second‐order reaction model. The Michaelis constant value for the immobilized glucoamylase (1.15 mg/mL) was higher than that for free glucoamylase (1.00 mg/mL). The maximum initial rate of the reaction values were 42.9 U/mg for the free enzyme and 33.3 U/mg for the immobilized enzyme. The optimum temperature for the immobilized preparation of poly(EGDMA–VTAZ)–Cu²⁺–glucoamylase was 65°C; this was 5°C higher than that of the free enzyme at 60°C. The glucoamylase adsorption capacity and adsorbed enzyme activity slightly decreased after 10 batch successive reactions; this demonstrated the usefulness of the enzyme‐loaded beads in biocatalytic applications. The storage stability was found to increase with immobilization. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011