Asymmetric membrane fiber-based carbon dioxide removal devices for ion chromatography

The application of hollow and filament-filled single asymmetric membrane fibers, consisting of a thin silicone layer on a tubular microporous support, for removing CO(2) in suppressed ion chromatography effluents is described. With appropriate choice of the removal device and operating conditions, the CO(2) can be essentially quantitatively (99+%) removed. For carbonate-based eluents, the use of such devices greatly reduces or eliminates the water dip, permitting better quantitation of poorly retained anions that elute close to the dip, allows practical gradient chromatography, and improves noise levels and attainable detection limits. In hydroxide eluent chromatography, the device largely removes the response from CO(2) present in the samples; this greatly aids atmospheric trace gas analysis by IC. Device dimensions are such that the dispersion introduced by the device is small.     

Robust forecasting of mortality and fertility rates: A functional data approach

A new method is proposed for forecasting age-specific mortality and fertility rates observed over time. This approach allows for smooth functions of age, is robust for outlying years due to wars and epidemics, and provides a modelling framework that is easily adapted to allow for constraints and other information. Ideas from functional data analysis, nonparametric smoothing and robust statistics are combined to form a methodology that is widely applicable to any functional time series data observed discretely and possibly with error. The model is a generalization of the Lee-Carter (LC) model commonly used in mortality and fertility forecasting. The methodology is applied to French mortality data and Australian fertility data, and the forecasts obtained are shown to be superior to those from the LC method and several of its variants.     

A survey on resource allocation in high performance distributed computing systems

An efficient resource allocation is a fundamental requirement in high performance computing (HPC) systems. Many projects are dedicated to large-scale distributed computing systems that have designed and developed resource allocation mechanisms with a variety of architectures and services. In our study, through analysis, a comprehensive survey for describing resource allocation in various HPCs is reported. The aim of the work is to aggregate under a joint framework, the existing solutions for HPC to provide a thorough analysis and characteristics of the resource management and allocation strategies. Resource allocation mechanisms and strategies play a vital role towards the performance improvement of all the HPCs classifications. Therefore, a comprehensive discussion of widely used resource allocation strategies deployed in HPC environment is required, which is one of the motivations of this survey. Moreover, we have classified the HPC systems into three broad categories, namely: (a) cluster, (b) grid, and (c) cloud systems and define the characteristics of each class by extracting sets of common attributes. All of the aforementioned systems are cataloged into pure software and hybrid/hardware solutions. The system classification is used to identify approaches followed by the implementation of existing resource allocation strategies that are widely presented in the literature.     

The Nonconvergence of h-Refinement in Prolate Elements

Prolate elements are a “plug-compatible” modification of spectral elements in which Legendre polynomials are replaced by prolate spheroidal wave functions of order zero. Prolate functions contain a“bandwidth parameter” $c \ge 0 $ c ≥ 0 whose value is crucial to numerical performance; the prolate functions reduce to Legendre polynomials for $c\,=\,0$ c = 0 . We show that the optimal bandwidth parameter $c$ c not only depends on the number of prolate modes per element $N$ N , but also on the element widths $h$ h . We prove that prolate elements lack $h$ h -convergence for fixed $c$ c in the sense that the error does not go to zero as the element size $h$ h is made smaller and smaller. Furthermore, the theoretical predictions that Chebyshev and Legendre polynomials require $\pi $ π degrees of freedom per wavelength to resolve sinusoidal functions while prolate series need only 2 degrees of freedom per wavelength are asymptotic limits as $N \rightarrow \infty $ N → ∞ ; we investigate the rather different behavior when $N \sim O(4-10)$ N ～ O ( 4 ? 10 ) as appropriate for spectral elements and prolate elements. On the other hand, our investigations show that there are certain combinations of $N,\,h$ N , h and $c>0$ c > 0 where a prolate basis clearly outperforms the Legendre polynomial approximation.     

Efficient polymer solar cell modules

Polymer solar cell modules based on the standard polymer–fullerene system of to-date, P3HT–PCBM, have been prepared and characterized. We have observed a loss of only 20% when up-scaling the active area of the solar cell by a factor somewhat larger than 10. An average solar cell efficiency of 3% and a module efficiency of 1.9% for three serially interconnected solar cells of 5.4 cm² each are reported. The route for further optimization of module performance is discussed based on analyzing the existing loss factors within this design.     

Study on the preparation and properties of novel block copolymeric materials based on structurally modified organometallic as well as organic polyamides and polydimethylsiloxane

Some novel ferrocene‐containing polyamide‐based block copolymer materials with telechelic polydimethylsiloxane oligomer and their organic analogues were prepared by solution‐phase polycondensation of ferrocene‐based organometallic and terephthaloyl‐ as well as isophthaloyl‐based organic acyl chlorides with a series of semi‐aromatic diamines having ether linkages together with variable aliphatic character. The corresponding polyamides of the synthesized materials, without polydimethylsiloxane segment, were also prepared for comparison of physicochemical properties. None of the synthesized organometallic and organic block copolymers along with their respective polyamides melted below 300 °C and their structural features were confirmed by their physical properties and spectroscopic studies. The weight‐average molecular weights and molecular parameters of all these materials were determined by the static laser light scattering technique. The materials were soluble in sulfuric acid and partially soluble in common organic solvents, and yet became readily soluble upon N‐trifluoroacetylation. The synthesized materials were further characterized by their water absorption characteristics, X‐ray diffraction studies and surface morphology (SEM and AFM) and thermal (DSC and TG) analyses, and their structure–property relationships were elucidated from these studies. The energies of pyrolysis for these materials were calculated by the Horowitz and Metzger method. © 2012 Society of Chemical Industry     

Purification,surface modification of coal ash silica and its potential application in rubber composites

This article reports the purification and surface modification of coal ash silica and afterwards its utilization as reinforcing filler in solution‐styrene‐butadiene rubber/butadiene rubber (S‐SBR/BR). The coal ash silica free of unwanted metal ions/mineral oxides was obtained using phosphoric acid. The chemical composition of the purified coal ash silica in comparison to impure coal ash indicates the presence of characteristic hydroxyl functional group at 3440 cm^?1 and an increase in the oxygen content as determined with the help of Fourier Transform Infrared and x‐ray photoelectron spectroscopy, respectively. The contact angle analysis shows that after purification the polar part of the surface energy increased to 17.5 from 12 m Jm^?2. While the surface area increased to an order of magnitude, i.e., 11.6 to 110.5 m² g^?1. The modification of purified silica particles with bis(3‐triethoxysilylpropyl) tetrasulfane reveal the functionalization of hydroxyl to ‐Si‐O‐R groups as detected at 1560 cm^?1. As a consequence, the modified silica based S‐SBR/BR composite resulted in improved mechanical properties due to enhanced silica‐rubber interaction. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Morpho-anatomical characterization of some members of euglenophycota (algae) of north-east Punjab,Pakistan based on light microscopy (LM) and scanning electron microscopy (SEM)

The study was carried out in four districts, that is, Gujranwala, Gujarat, Narowal and Sialkot of Punjab, Pakistan. The sampling was carried out randomly in different seasons from the water bodies especially from wastewater. Twenty-one species belonging to Euglenophycota were identified using light microscopy and scanning electron microscopy from which 04 species belong to genus Phacus, 02 species belonging to Trachelomonas and Euglena based on light microscopy. It was observed that Euglena was the most diverse genus and it is supposed to be the indicator species of the polluted water. It was observed that E. oblonga was found in maximum pH range, that is, 7.0–11.0. Similarly, E. brevicaudatus was found in maximum EC, that is, 169 ± 1.5 ms/cm these outcomes indicated that for internal examination along with LM, SEM was necessary for correct identification of algal sample up to specie level.