Resistance of 9–20%Cr-steels against metal dusting

The metal dusting resistance of various 2¼ Cr to 20%Cr steels has been tested in flowing CO-H₂-H₂O atmospheres at 525, 560, 600 and 650°C. For the 2¼Cr-steel immediately a constant rate of metal wastage is reached, for the high alloy steels the approach to this rate where all surface area is attacked, is more or less retarded by an oxide layer. The formation of a protective Cr-rich oxide layer is favoured by a high Cr-content of the steels, by the ferritic structure, by a fine-grained microstructure, by surface working and by high temperatures – these factors hinder or suppress metal dusting, whereas low Cr-concentration, austenitic structure, coarse-grained microstructure, removal of surface deformation by etching and a critical temperature of ≤ 600°C accelerate and enhance metal dusting.     

New polyhydrazides and poly(1,3,4-oxadiazole)s containing pendent phenoxy groups

A series of new polyhydrazides containing pendent phenoxy groups has been synthesized by low-temperature solution polycondensation of equimolar amounts of diacid dichlorides and 2-phenoxyterephthalic dihydrazide in N-methyl-2-pyrrolidi-none (NMP). The thermal cyclization of the polyhydrazides gave the corresponding poly(1,3,4-oxadiazole)s containing pendent phenoxy groups. The polymers were characterized by viscometry, solubility measurements, IR spectroscopy, differential scanning calorimetry (DSC) and thermogravimetric analysis.     

cis/trans isomerization of unsaturated fatty acids as possible control mechanism of membrane fluidity inPseudomonas putida P8

Exponentially growing cells ofPseudomonas putida had an increased ratio of saturated to unsaturated fatty acids in response to increased growth temperatures. Resting cells in which fatty acid biosynthesis was stopped reacted to a thermal increase by convertingcis-monounsaturated fatty acids totrans isomers.cis/trans isomerization of up to 60% of the unsaturated fatty acids was also activated by alcohols of different chain length. Their effective concentrations apparently depended on the lipophilic character of the alcohols. Also, a salt shock caused by the addition of NaCl resulted in the production oftrans fatty acids. However, cells that were adapted to growth media of high osmolarity synthesized cyclopropane fatty acids instead oftrans fatty acids. Activity ofcis/trans-isomerase was dependent on the growth phase and was significantly higher during logarithmic growth than during the stationary phase. The results of this study agree with the hypothesis that the isomerization ofcis intotrans unsaturated fatty acids is an emergency action of cells ofP. putida to adapt membrane fluidity to drastic changes of environmental conditions.     

Experimental and Numerical Characterization of the Influence of a Smoldering Cellulosic Substrate on a Cigarette’s Ignition Propensity Test

An experimental and numerical investigation was conducted to characterize the influence of the cellulosic substrate used to assess the ignition propensity (IP) of cigarettes. Such an IP test is currently prescribed by the ISO 12863 standard and its results typically show poor repeatability. It is believed that such a low reproducibility is mainly due to the variability of the cigarette itself but it is unclear as to what extent the substrate also influences the variability of the test results. Therefore, the objective of this investigation was to analyze the potential influence of the substrate by first characterizing the thermodynamic behavior experimentally and then constructing a numerical model that can quantify the relative influence of the distinct parameters. A suite of experimental methods that included TGA, DSC, infrared measurements and laser triangulation among others was used to measure the thermophysical properties of the substrate. These properties were then used to build a CFD model that simulated the smoldering combustion experienced by the substrate during the IP test. After validating the model against contactless temperature measurements, a parametric study consisting of 363 IP simulations was performed, which served to quantify the relative importance of 13 thermophysical parameters when varying in ranges of about 5%–50%. The results indicated that the heat capacity, pyrolysis activation energy, and air gap thickness are the most influencing aspects of the substrate because they influence the heat absorbed by the substrate about 7%, 26% and 33%, respectively. The latter parameter was found to significantly vary with each test and its influence was comparable to that of some major properties of the cigarette such as the cigarette’s temperature and burning rate. It is therefore postulated that the variability of the substrate itself plays an important role on the poor repeatability of the test and it may comprise its reliability.     

Review of Benthic Invertebrate Fauna in Extremely Acidic Environments (pH ≤ 3)

Some benthic invertebrate species are able to colonise habitats in extremely acidic waters. We compiled a list of acid-resistant benthic invertebrates from the literature and extended it by studying extremely acidic mining lakes in eastern Germany. Acid-resistant species were registered for some habitats with pH ≤ 3, such as volcanic lakes, acid strip streams, and acidic mining lakes. Twenty nine taxa were found in waters with pH below 3. Diptera comprised 48.3% of the total number of taxa, followed by Coleoptera with 10.3%, Trichoptera 10.3%, Ephemeroptera, Megaloptera, and Plecoptera each with 6.9%, and Odonata, Hirudinea, and Acari each with 3.5%. Chironomus (Diptera: Chironomidae) were the most common genus in extremely acidic environments with 9 species. In Germany, Chironomus crassimanus was found to be the most abundant species in extremely acidic mining lakes. Generally, aquatic insects were the most common group of benthic invertebrates.