Incorporation of postconsumer polyurethane foam into a polymer/clay aerogel matrix

The feasibility of incorporating ground recycled polyurethane (PU) foam into clay/polymer aerogels was demonstrated, and a range of compositions were prepared and characterized to determine the effect of variation in the formulations on density and mechanical properties of the resulting materials. This study followed a modified combinatorial approach. Initially, experiments were performed in water using either sodium exchanged montmorillonite or laponite clay, poly(vinyl alcohol) (PVOH) solution as the polymer binder, and the recycled PU foam. Freezing and freeze‐drying the aqueous gels produced aerogels, which were characterized through density and mechanical testing, scanning electron microscopy, and thermal gravimetric analysis. The study was expanded by exploring alternative binder chemistries, including the use of an alginate polymer in place of the PVOH or adding a polyisocyanate as a crosslinking agent for PVOH. The effect of recycled PU foam content, clay type and level, and binder type and level on the mechanical properties of the aerogels were determined and will be discussed herein. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42586.     

Role of Nd3+ ions on the nucleation and growth of PbS quantum dots (QDs) in silicate glasses

The influence of Nd₂O₃ addition on the precipitation kinetics of lead chalcogenide (PbS) quantum dots (QDs) in silicate glasses was investigated. Energy dispersive X‐ray spectroscopy (EDS) indicated that the Nd³⁺ ions are preferentially located inside the PbS QDs rather than in the glass matrix. Changes in diameter (D) of PbS QDs exhibited smaller time dependencies (i.e., D≈t^{0.270‐0.286}) than that predicted by the classical Lifshitz–Slyozov–Wagner (LSW) theory. This is due to the limited concentrations of Pb²⁺ and S^2? ions and the large diffusion distance inside the glass matrix. In addition, extended X‐ray absorption fine structure (EXAFS) results indicated that the formation of PbS QDs was retarded due to the presence of Nd₂O₃ in the glasses, as the large NdO_x polyhedra interrupt the diffusion of Pb²⁺ and S^2? ions. We believe that these Nd³⁺ ions are primarily located in PbS QDs in the form of Nd–O clusters, and that the PbS QDs are built on top of these clusters.     

The effect of Fe2+ state in electrical property variations of Sn‐doped hematite powders

The structural, electrical, and chemical properties of Sn‐doped Fe₂O₃ powders were investigated. Various quantities of Sn‐doped Fe₂O₃ powders were synthesized using solid‐state reactions. Rietveld analysis for the powders that were doped below 2% revealed a phase‐pure Sn‐doped Fe₂O₃ structure (i.e., identical to Fe₂O₃ structure). Alternatively, the analysis for the powders that were doped more than 3% exhibited secondary phase. The unit cell volume and electrical conductivity of the phase‐pure samples increased with an increase in the doping concentration. X‐ray photoelectron spectroscopy measurements showed an increased Fe²⁺ state with the increase in Sn doping concentration. Therefore, the improved electrical conductivity and unit cell volume with the increase in doping concentration of the phase‐pure powders might be related to the increased Fe²⁺ state.     

Orthorhombic‐pseudocubic phase transition and piezoelectric properties of (Na0.5K0.5)(Nb1−xSbx)‐SrZrO3 ceramics

0.96(Na_0.5K_0.5)(Nb_1?xSb_x)‐0.04SrZrO₃ ceramics with 0.0≤x≤0.06 were well sintered at 1060°C for 6 hours without a secondary phase. Orthorhombic‐tetragonal transition temperature (T_O‐T) and Curie temperature (T_C) decreased with the addition of Sb₂O₅. The decrease in T_C was considerable compared to that in T_O‐T, and thus the tetragonal phase zone disappeared when x exceeded 0.03. Therefore, a broad peak for orthorhombic‐pseudocubic transition as opposed to that for orthorhombic‐tetragonal transition appeared at 115°C‐78.2°C for specimens with 0.04≤x≤0.06. An orthorhombic structure was observed for specimens with x≤0.03. However, the polymorphic phase boundary structure containing orthorhombic and pseudocubic structures was formed for the specimens 0.04≤x≤0.06. Furthermore, a specimen with x=0.055 exhibited a large piezoelectric strain constant of 325 pC/N, indicating that the coexistence of orthorhombic and pseudocubic structures could improve the piezoelectric properties of (Na_0.5K_0.5)NbO₃‐based lead‐free piezoelectric ceramics.     

Nanofiber‐Based Hydrocolloid from Colloid Electrospinning Toward Next Generation Wound Dressing

Nanofiber‐based hydrocolloid scaffold is prepared by colloid electrospinning of thermoplastic polyurethane (TPU)/sodium carboxymethyl cellulose (S.CMC) in tetrahydrofuran (THF)/dimethylformamide (DMF). The most suitable process of electrospinning for successful formation of fibers is investigated by controlling the concentration of polymeric solution and co‐solvent ratio. In order to accomplish high wettability, the amount of colloid (S.CMC) and the co‐solvent ratio (THF/DMF), which affects the morphology of fibers, are adjusted. Finally, the open wound healing effect is confirmed using nanofiber‐hydrocolloid from in vivo animal studies. A detailed study of the wound healing process is also demonstrated for the first time.

     

Phase‐Changeable Fatty Acid Available for Temperature‐Regulated Drug Release

This paper describes a mixture of fatty acids that is available for temperature‐controlled release of drugs. The mixture consists of two fatty acids with different melting points. At a specific composition, the mixture represents a single melting point of 38–40 °C which is slightly above the normal human body temperature. To demonstrate its use in the temperature‐regulated release, this study fabricates fatty acid‐incorporated polymer fibers containing dye‐loaded polymer particles in their core. Below the melting point of the mixture, it will be in a solid state to restrict the passing of dye loaded in the core whereas the dye can be released instantly through the generated pores at a temperature slightly higher than the melting point. The release profiles of the dye can be further manipulated by varying the amount of the mixture contained in the fibers and the composition of the mixture.

     

Dispersant‐free dyeing of poly(lactic acid) fabric with temporarily solubilised disperse dyes from azopyridone derivatives

Poly(lactic acid) fibre is derived from annually renewable crops and known to be 100% compostable. In order to extend its environmental friendliness into the dyeing process, dispersant‐free dyeing of poly(lactic acid) fabric with three temporarily solubilised azo disperse dyes based on hydroxypyridone moiety containing a β‐sulphatoethylsulphonyl group was investigated. The dyes were successfully applied to poly(lactic acid) fabric without the use of dispersants. The colour yields of the dyes on poly(lactic acid) fabric were observed to be dependent on dyebath pH and dyeing temperature. The optimum results were obtained at pH 4–5 and 110 °C. One of the dyes showed a colour yield as good as that of a commercial disperse dye and good build‐up on poly(lactic acid) fabric. All of the dyes could be alkali cleared owing to ionisation of the dye under mild alkaline conditions. Wash fastness was good to very good, and light fastness was good. The chemical oxygen demand levels of the poly(lactic acid) dyeing effluent from the dyes were considerably lower than those from a commercial disperse dye.     

Mechanical Properties of Submicrometer‐Grained Transparent Yttria Ceramics by Hot Pressing with Hot‐Isostatic Pressing

Here, we report the fabrication and mechanical properties of submicrometer‐grained (0.29–0.58 μm) transparent yttria ceramics by hot pressing combined with hot‐isostatic pressing. The effects of the grain size on the microhardness and the fracture toughness were studied. An unusual decrease of the fracture toughness with an increase in the grain size was revealed, which may be attributed to the different grain size dependence of the fracture behavior of the ZrO₂‐doped yttria ceramics compared to that of other yttria ceramics. The microhardness and fracture toughness of the transparent yttria ceramics were found to be better than those of the large‐grained yttria ceramics.     

Surface and thermal characteristics of rubber‐modified aromatic polyamide

Polyamide/epoxysilane (coupling agent) composites were reacted with poly(dimethylsiloxane) (PDMS), a condensation product of diethoxydimethylsilane (DEDMS), by a sol–gel process. Polyamide–PDMS nanocomposites were obtained. The existence of the condensation product of DEDMS and the reaction between the epoxy group and the polyamide were confirmed with Fourier transform infrared, attenuated total reflection, and wide‐scanning X‐ray photoelectron spectroscopy. Atomic force microscopy and contact‐angle measurements showed that the surface properties of polyamide were greatly improved by the addition of PDMS. The pyrolysis temperature of polyamide with PDMS was approximately 400°C, and the pyrolysis temperature was similar to that of pure polyamide. Also, the char contents increased with the addition of PDMS. The glass‐transition temperature of polyamide with or without PDMS was approximately 140°C according to differential scanning calorimetry. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1947–1955, 2004     

Mechanical and thermal properties of ceramic‐modified poly(amide imide)

Poly(amide imide)–epoxysilane (coupling agent) composites were reacted with silica, a condensation product of tetraethylorthosilicate (TEOS), by a sol–gel process and were then cast into films. After this procedure, the chemical characteristics and mechanical and thermal properties were measured. Fourier transform infrared showed that silica existed in the poly(amide imide) matrix. When a proper amount of silica was added to the poly(amide imide) matrix, the tensile strength, elongation, and toughness increased greatly. A poly(amide imide)/30 wt % epoxysilane composite with 20 wt % TEOS had the best mechanical properties. Thermogravimetric analysis under nitrogen and oxygen atmospheres indicated that the char contents increased with the amount of silica. The glass‐transition temperatures of the poly(amide imide)–silica nanocomposites were observed around 170–180°C with differential scanning calorimetry. This approach may be a new method for the low‐temperature thermal curing of poly(amide imide). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1780–1788, 2004