Synthesis and characterization of a novel proton‐exchange membrane for fuel cells operating at high temperatures and low humidities

The synthesis of a p‐toluidine/formaldehyde (PTF) resin was performed, and the effects of the molar ratio of the individual monomers and the polymerization conditions on the structure of the PTF resin were studied. Fourier transform infrared and ¹³C‐NMR spectra were used to characterize the PTF. Wide‐angle X‐ray diffraction patterns revealed the crystalline structures of various PTFs. Polarized optical microscopy revealed that the molar ratio of the monomers had a strong effect on the crystalline morphologies. A longer polymerization time turned out a polymer with a higher intrinsic viscosity and molecular weight, which led to differences in the proton conductivity. All of the PTFs showed a higher proton conductivity than a commercial Nafion membrane at 90–100°C and 0% relative humidity. The proton conductivity of the PTF series could be improved by sulfonation with sulfuric acid and could be maintained after blending with polyurethane. Pure methanol could be used as a fuel source because of the insolubility and nonwetting properties of PTF in methanol to increase the output current density for a PTF membrane electrode assembly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Monoclonal antibody-based competitive ELISA for simultaneous detection of rinderpest virus and peste des petits ruminants virus antibodies

An experimental competitive enzyme-linked immunosorbent assay (morbillivirus cELISA) using a recombinant N antigen (rRPV N) expressed in a baculovirus and a ruminant morbillivirus (RPV and PPRV)-specific monoclonal antibody (P-13A9) was developed for simultaneous detection of rinderpest virus (RPV) and peste des petits ruminants virus (PPRV) antibodies and its diagnostic performance was evaluated. A set of known reference antisera against RPV and PPRV belonging to different lineages, experimental sera from cattle vaccinated for a RPV of Asian lineage, and field sera from cattle and sheep/goat populations known to be positive (West Africa) and negative (Korea) for RPV and PPRV were used for the evaluation. Morbillivirus cELISA results on the panel of experimental RPV and PPRV antisera showed high correlation (r=0.97) between the whole virus and the rRPV N antigens, suggesting that the rRPV N contains a ruminant morbillivirus-specific antigenic determinant recognized by the P-13A9 and it may be suitable as an ELISA antigen in place of the whole virus. Morbillivirus cELISA detected anti-RPV and anti-PPRV antibodies in all reference RPV and PPRV antisera containing VN titers >/=1:8, suggesting that the assay can simultaneously detect antibodies against RPV and PPRV. Anti-RPV antibody was detected by morbillivirus cELISA in vaccinated cattle as early as the VNT and continued to be detectable by both the cELISA and the VNT until termination of the study. When applied to field samples from Africa, morbillivirus cELISA showed good agreement with a RP cELISA kit (kappa value of 0.86) in bovine sera and with a peste des petits ruminant cELISA kit (kappa value of 0.81) in caprine/ovine sera. Usefulness of morbillivirus cELISA using the rRPV N protein was discussed.     

Monolithic integration of microlensed resonant photodetectors andvertical cavity lasers

Monolithic integration of high performance microlensed resonant photodetectors and vertical cavity lasers (VCLs) from a single epitaxial growth is presented. The VCLs have sub-200 μA threshold currents. Adjacent detectors have the same operating wavelength and responsivities of ~0.4 A/W with ~6 nm optical bandwidths     

Salmonella meningitis: clinical experience of third-generation cephalosporins

Fifteen paediatric patients with Salmonella meningitis were retrospectively reviewed. Presenting symptoms and signs included fever, vomiting, seizures, poor activity, diarrhoea and bulging anterior fontanelle in most patients. Seven out of eight patients with prolonged fever for > 10 days had neurologic sequelae; therefore, prolonged fever is a significant prognostic factor of a poor outcome (p < 0.005). All 15 patients had a brain ultrasound or computed tomography in the acute stage and 11 patients had abnormal findings. The 14 surviving patients were treated with a third-generation cephalosporin for at least 3 weeks. Seven patients (47%) made complete recoveries; two of them were treated solely with a third-generation cephalosporin. Only one mortality (6%) occurred and there were no relapses. In conclusion, high frequencies of prolonged fever, neuroimaging abnormalities and neurologic sequelae were seen in patients with Salmonella meningitis treated with third-generation cephalosporins.     

Lipid peroxides, glutathione, gamma-glutamylcysteine synthetase and gamma-glutamyltranspeptidase activities in several tissues of rats following water-immersion stress

The effects of water-immersion restraint (WIR) stress on lipid peroxide, glutathione (GSH), glutathione peroxidase (GSH-Px), gamma-glutamylcysteine synthetase (gamma-GCS) and gamma-glutamyltranspeptidase (gamma-GT) activities in several tissues of rats were investigated. Hepatic and intestinal lipid peroxide levels were increased significantly in the WIR stress group. In both tissues, GSH levels were significantly decreased and gamma-GCS activity was significantly increased. In addition, gamma-GT activities remained unchanged in both tissues following WIR stress. However, lipid peroxide and GSH levels did not change in the stomach and brain in the WIR stress group compared to the control group. These results suggest that lipid peroxidation, but not the depression of GSH synthesis and/or the increase of GSH breakdown may be a factor in hepatic and intestinal GSH reduction following WIR stress.     

Dichotomous behavior of polymer melts in isothermal melt spinning

Isothermal melt spinning experiments have been conducted using two polyethylene melts of low density (LDPE) and high density (HDPE) to produce steady state spinline profiles. The data revealed the threadline extensional viscosity exhibiting a contrasting picture : extension thickening behavior for LDPE and extension thinning one for HDPE. A White-Metzner model having a strain rate-dependent relaxation time was then found to be able to simulate this dichotomy in melt spinning fairly well: the fluids whose relaxation times have smaller strain rate-dependence can fit LDPE data with extension thickening extensional viscosity whereas the fluids whose relaxation times have larger strain rate-dependence can fit HDPE data with extension thinning extensional viscosity. This dichotomous nature of viscoelastic fluids is also believed to be able to explain other similar contrasting phenomena exhibited by polymer melts, such as vortex/no vortex in entry flows, cohesive/ductile fracture modes in extension, and more/less stable draw resonance than Newtonian fluids.     

试样薄化导致的Cu－Al贝氏体／马氏体组织变化

加热到１１７３Ｋ的Ｃｕ－２５ａｔ；％Ａｌ合金块状试样经７２３Ｋ６０Ｓ等温淬火后其组织由片状的“羽毛状贝氏体（９Ｒ结构）和β＿１＇马氏体（１８Ｒ结构）组成。当试样被离子束轰去进一步薄化后，在足够薄的区域内生成了许多２Ｈ结构的薄片马氏体。初步分析认为该薄片马氏体形成的原因是由于贝氏体生成时在试样内留下了高的应力场，当试样薄化到一临界厚度以下时，试样区的三维约束条件松弛使试样内的应力场触发了薄片马氏体的生成。这些薄片马氏体是通过位于贝氏体界面上位错的重新启动而长大的。     

Hybrid verrucous squamous cell carcinoma of sinonasal tract: a case report

Verrucous carcinoma is a variant of squamous cell carcinoma and should be distinguished from benign papilloma and well-differentiated nonverrucous squamous cell carcinoma. It is rare tumor of the sinonasal tract. Occasionally, conventional squamous cell carcinomatous components may be seen in verrucous carcinoma. This entity is called a hybrid verrucous squamous cell carcinoma. We report a case of hybrid verrucous squamous cell carcinoma occurring in the nasal cavity and paranasal sinus of a 67-year-old male. The removed mass shows the typical feature of verrucous carcinoma, but focally conventional squamous cell carcinomatous area is also noted. The treatment of this case follows verrucous carcinoma, but close follow up is mandatory because it may potentially spread to regional lymph nodes in contrast to pure form of verrucous carcinoma.     

The effect of silica characterization on the microstructure of BaFe12O19 ferrites

The anisotropically formed BaFe₁₂O₁₉ ferrites were prepared from the hot-rolled mill scale and silica was added to the ferrite during fine milling in the range 0.15 to 0.50 wt%. These ferrites were sintered at 1220° C for 2 h. The grain growth of the ferrites is dominantly influenced by the sizes of the silica added. Coarse-grain ( 1m) silica tends to promote discontinuous grain growth, which increases drastically with slightly increasing amounts of silica added, while fine-grain ( 0.013m) silica tends to retain fine grain microstructures with the same increasing amount of silica. The average grain size of the ferrite without silica addition was 8 to 10m. The size was increased to as large as 30m on addition of 0.15% coarse-grain silica and the microstructure was full of extremely large grains on the addition of 0.50% coarse-grain silica.