Manufacturing and foaming of high melt viscosity of polypropylene by using electron beam radiation technology

The high melt viscosity of polypropylene was studied by grafting bifunctional monomers, 1,6‐hexanediol diacrylate (HDDA) and tripropylene glycol diacrylate (TPGDA), onto homopolypropylene (HPP) and random ter‐polypropylene (RTPP) under electron‐beam irradiation. Creation of the high‐melt‐viscosity polypropylene was possible at low radiation dosage and low monomer content, under a prohibition of both radiation degradation and homopolymerization. TPGDA monomer was more effective in increasing the melt viscosity of HPP compared with RTPP, whereas HDDA monomer was more effective for enhancing the melt viscosity of RTPP. Such different effects of monomers on melt viscosity may arise from different monomer structures, namely, TPGDA has additional three methyl groups, but HDDA has no methyl groups. Electron‐beam radiation technology, on an increase of the melt viscosity, was much more effective in HPP than RTPP, when compared with virgin polymers. Modified RTPP and HPP with high melt viscosity were capable of foaming with numerous fine cells, of which the modified HPP with 1.5 mmol TPGDA and 0.5 kGy could create more spherical foam cells and its bending strength was 1.5 times more than that of the foamed RTPP. POLYM. ENG. SCI., 46:431–437, 2006. © 2006 Society of Plastics Engineers.     

EXTERNAL FLUID HEATING OF A POROUS ED

This work deals with the thermal analysis of externally heated porous beds of finite length. A one dimensional model was developed that includes conduction and storage in both the fluid and bed, convective exchange between the fluid and bed, and the effect of adsorption/desorption in the bed. This model results in two coupled differential equations for the fluid and bed temperatures as functions of four independent dimensionless parameters. These equations were solved numerically using finite difference approximations. A truncation error analysis was carried out to maintain an accurate solution. The method of normalization is such that the results of this analysis are of use in bed design when the breakthrough characteristics in finite length beds are of interest. A method to measure bed thermal performance is defined and a means to optimize bed thermal performance is presented. An experiment was conducted to validate the numerically obtained results. A comparison of numerical to experimental results is presented     

六维腕力传感器非线性正解耦方法设计

多维力传感器利用其多个转换单元完成测量加载于其结构上未知负载的作用效果,解耦是其设计的重要组成部分。针对传统静态线性解耦方法的不足,试图将传统线性解耦方程扩展为多项式结构,受其多元高次方式通解形式的启发,构造了一种多项式非线性静态正解耦方程,该方法无需传统线性解耦方法中的曲线拟合、逆解,不依赖以系统是线性为前提,且方程可以扩展成任意结构的多项式。实验结果表明:该方法能降低输出耦合误差。     

新型空穴传输材料N,N′-二苯基-N,N′-二(3-甲苯基)-4,4′-联萘胺的合成、薄膜发光与能级比较

将有机电致发光中最常用的空穴传输材料N,N′-二苯基N,N′-二(3甲苯基)-4,4-′联苯胺(TPD)中的联苯以联萘代替,合成了新型空穴传输材料N,N′-二苯基N,N′-二(3-甲苯基-)4,4′-联萘胺(PMPN)。与TPD在熔点、薄膜发光、量子效率和电化学行为上进行了比较。PMPN比TPD(m.p.175℃)有稍低的熔点、稍高的电离势,更高的薄膜荧光量子效率。联萘的引入可以增大体系的共轭作用,对载流子传输有益。通过构效关系的分析,可以对进一步合成高性能空穴材料进而得到高性能的有机电致发光器件有所借鉴。     

CaCO3/natural rubber latex nanometer composite and its properties

Calcium carbonate/natural rubber (NR) latex nanometer composites were prepared by adding nanometer CaCO₃ whose surface had been treated to natural rubber latex (NRL) before sulfuration. The physical, thermooxidative aging, and thermal degradation properties and the ultra‐microstructure were analyzed with a multipurpose material testing meter, a thermal analysis meter and a Philips XL‐30 SEM, respectively. The results showed that the structures and properties of nanometer composites could be clearly improved by NRL mixed with surface‐treated nanometer CaCO₃. The physical properties of the nanometer composites were best when the content of surface treatment agent was 2.5% (to nanometer CaCO₃), the nanometer CaCO₃/NRL content was 3:100, and the stirring time for treating the surface of the nanometer CaCO₃ was 20 min. Simultaneously, the thermooxidative aging resistance of the nanometer composites also was significantly improved. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3442–3447, 2006     

Improved mechanical properties of shape‐memory polyurethane block copolymers through the control of the soft‐segment arrangement

High‐performance shape‐memory polyurethane block copolymers, prepared with two types of poly(tetramethylene glycol) (PTMG) used as soft segments, were investigated for their mechanical properties. Copolymers with a random or block soft‐segment arrangement had higher stresses at break and elongations at break than those with only one kind of PTMG. Random copolymers with fewer interchain interactions showed higher elongation than block copolymers. All the copolymers had shape‐recovery ratios higher than 80%. In dynamic mechanical testing, the glass‐transition behavior clearly depended on the soft‐segment arrangement: random copolymers had only one glass‐transition peak, whereas block copolymers showed two separate glass‐transition peaks. Overall, the control of the soft‐segment arrangement plays a vital role in the development of high‐performance shape‐memory polyurethane. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2410–2415, 2004     

三苯基膦合成工艺改进

采用弗 克法 ,以苯 ,三氯化磷 ,硫磺直接回流反应 ,生成三苯基硫膦 ,再经锌粉还原制得三苯基膦。其中采用不分离出三苯基硫膦以及用锌粉作还原剂等新工艺。该法具有收率高 ,产品纯 ,反应条件缓和等特点。     

Sulfonated poly(ether ketone ketone) ionomers as proton exchange membranes

Sulfonated poly(ether ketone ketone) ionomers (SPEKK) with ion‐exchange capacities (IEC) between 0.2 and 3.4 meq/g were prepared by sulfonating PEKK with a mixture of concentrated and fuming sulfuric acids. Sulfonation occurs only on the phenyl rings attached to ether and ketone groups. The glass transition temperature of the dry SPEKK ionomers increased linearly with increasing IEC, and the ionomers were thermally stable to ～250°C, above which desulfonation occurred. Water‐swollen ionomers exhibited microphase separated morphologies, and the average correlation length determined by small angle X‐ray scattering increased with increasing IEC. The proton conductivity of hydrated SPEKK membranes measured by impedance spectroscopy ranged from ～10^–3 to 10^–1 S/cm as the IEC increased from ～1.0 to 2.4 meq/g. Single cell performance curves on membrane‐electrode assemblies (MEA) indicated that the SPEKK membranes approached the performance of Nafion? for an IEC of 2 meq/g. POLYM. ENG. SCI., 45:1081–1091, 2005. © 2005 Society of Plastics Engineers     

湿法腈纶生产的含腈废水处理实验研究

采用不同方法对湿法腈纶废水进行预处理，比较了它们的处理效果和特点。研究中使用的菌种预处理方法达到了理想的效果，废水中大分子有机污染物被迅速、高效地分解为挥发性脂肪酸和氨氮等，为后续的接触氧化以及反硝化创造了良好的条件，COD和TKN的总去除率分别为92％和85％，最终出水达到或优于行业二级排放标准。     

A kinetic model for polystyrene (PS) pyrolysis reaction

A mathematical model for the pyrolysis reaction of polystyrene (PS) in a semi-batch reactor has been presented. The thermal degradation of PS was flexibly modeled by a combination of random and specific chain-end scissions. Numerical simulation was used to investigate the effect of operating conditions on the PS products spectrum, the results of which were validated by the experimental data. It was found that as the reaction temperature increased (decreased), the monomer fraction in the products became lower (higher) while the trimer higher (lower). No significant variation in the product composition was, however, observed while constant temperature was maintained. These results indicate the reaction temperature is an effective manipulated variable for the control of products composition of PS pyrolysis. The calculation of the optimum temperature trajectories through the optimization study can thus be of interest for achieving productivity enhancement in plastics pyrolysis processes. This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement from Korea University.