Optimal number of periodic preventive maintenance operations under warranty

This paper considers determination of the optimal number of periodic preventive maintenance operations during the warranty period. The hazard rate after preventive maintenance lies between as good as new and as bad as old. After minimal repair, the hazard rate of the system remains unchanged. Free and modified warranty policies are considered with a numerical example using the Weibull case.     

An Analog Front‐End Circuit for ISO/IEC 14443‐Compatible RFID Interrogators

An analog front‐end circuit for ISO/IEC 14443‐compatible radio frequency identification (RFID) interrogators was designed and fabricated by using a 0.25 µm double‐poly CMOS process. The fabricated chip was operated using a 3.3 Volt single‐voltage supply. The results of this work could be provided as reusable IPs in the form of hard or firm IPs for designing single‐chip ISO/IEC 14443‐compatible RFID interrogators.     

连铸坯红送热装应用效果分析

对加热炉用连铸坯红送热装效果的分析结果表明，该技术的应用可节能降耗，提高产量和加热质量。     

Efficient modeling of panel-like structures in perforation simulations

This paper presents results of numerical simulations for impact effects in panel-like structures using solid and shell element modeling techniques. Three examples from experiments in literature have been numerically analyzed. The nonlinear transient dynamic analysis code, LS-DYNA is used in the simulations to model projectiles and panel-like targets. It is found that models established for panel-like targets using solid shell elements cannot only save significant computational effort, but also produce good results as long as the panel-like targets satisfy certain conditions. A criterion that governs the validity of modeling panel-like targets with shell elements is proposed in the paper.     

Accelerated wear testing with a microfabricated surface to evaluate the lubrication ability of biomolecules on polyethylene

Wear of ultrahigh‐molecular‐weight polyethylene (UHMWPE) and wear‐particle‐induced osteolysis and bone resorption are the major factors causing the failure of total joint replacements. It is feasible to improve the lubrication and reduce the wear of artificial joints. We need further understanding of the lubrication mechanism of the synovial fluid. The objective of this study is to evaluate the lubricating ability of three major components in the synovial fluid: albumin, globulin, and phospholipids. An accelerated wear testing procedure in which UHMWPE is rubbed against a microfabricated surface with controlled asperities has been developed to evaluate the lubrication behavior. An analysis of the wear particle dimensions and wear amount of the tests has provided insights for comparing their lubrication performance. It is concluded that the presence of biomolecules at the articulating interface may reduce friction. A higher concentration of a biological lubricant leads to a decrease in the wear particle width. In addition, in combination with the wear results and mechanical analysis, the roles of individual biomolecules contributing to friction and wear at the articulating interface are discussed. These results can help us to identify the role of the biomolecules in the boundary lubrication of artificial joints, and further development of lubricating additives for artificial joints may be feasible. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effects and properties of poly(arylene ether benzonitrile)s of various molecular weights blended with sulfonated poly(ether ether ketone)

Poly(arylene ether benzonitrile) (PAEBN) was synthesized with 2,6‐dichlorobenzonitrile and biphenol. PAEBNs with various molecular weights (MWs), 1,640,000 and 185,000 g/mol, were synthesized by control of the stoichiometry of the monomers and were blended with sulfonated poly(ether ether ketone) (SPEEK). The effects of MW on the water uptake, swelling, methanol permeability, and proton conductivity of the SPEEK/PAEBN blend membranes were investigated. The molecular mobility of the SPEEK/PAEBN blends was also examined in this study. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

复合地基的沉降计算方法

水泥土搅拌桩复合地基的设计可用其沉降进行控制。本文列举了目前比较常见的几种沉降计算方法，综合这些方法，提出了以沉降进行控制的设计思路，并结合这几种计算方法的计算模型或原理，提出在工程计算中注意的问题，进而对工程实用性及经济性进行了一些尝试性的探讨。     

USL和USK系列振动筛防噪技术分析

为了改善筛分机械的使用环境，降低筛分机械的噪声，从噪声源入手，从内因和外因两个方面分析了筛分机噪声的形成原因。论述了USL和USK系列振动筛在降低噪声方面所采取的先进技术措施。     

冷却水污垢及其对冷却器换热的影响

分析了冷却器的结垢机理 ,提出了冷却器污垢层、污垢热阻随运行时间的规律 ,以及污垢热阻与换热系数、换热面积的关系式 ,并通过算例阐述了污垢热阻对冷却器的影响程度 ,进而定性地分析了污垢热阻对空分装置的影响。