Chemical changes in polyvinyl fluoride during the process of fibre-spinning

Conclusions The change in some properties of polyvinyl fluoride during the process of fibre spinning has been investigated.It has been found that during the process of converting PVF powder into fibre, the degree of polymer crystallinity plus its resistance to thermal and thermooxidative degradation is increased; depending on the spinning regime, the densities and physicomechanical properties of PVF fibres are different.Translated from Khimicheskie Volokna, No. 4, pp. 34–35, July–August, 1984.     

Effect of process distillation on mutagenicity and cell-transformation activity of solvent-refined,coal-derived liquids

Blended SRC-II process streams, representing a full boiling range distillate material, were fractionally distilled into non-overlapping 50 °F cuts with boiling points between 300 and 850 °F. Another set of 18 distillate cuts were obtained with boiling points ranging between 138 and 1055 °F. Distillate cuts were assayed for mutagenic activity using the histidine reversion assay with Salmonella typhimurium strains TA98, TA100, TA1535 and TA1537, as well as for mammalian-cell transformation activity in the Syrian hamster embryo test, and DNA damage in the prophage induction assay. Samples were also separated into chemical class fractions by alumina column chromatography and analysed by high resolution gas chromatography so that the chemical composition of the cuts could be related to their relative activity in the different assays. In the mammalian cell transformation and microbial mutagenicity assays, significant activity was found almost exclusively in distillate cuts with components boiling > 700 °F, with the highest activity in the transformation assay observed for cuts > 800 °F. All of the distillate cuts showed increased levels of DNA damage as expressed by lambda prophage induction in Escherichia coli 8177. However, the greatest activity was associated with distillate cuts with boiling points in the 800 °F + range. Chemical analysis of the 50 °F distillate cuts showed a variety of polycyclic aromatic hydrocarbons (PAH) and amino-PAH compounds to be present in the distillate cuts boiling > 700 °F and essentially absent from cuts boiling < 700 °F. The sample set of non-overlapping (50 °F) cuts were reblended according to the proportions of each cut found in the original blend material. These reblended composites were then assayed to compare their activity with that predicted from the activities of the component distillate cuts. The reblending experiments indicated the microbial mutagenicity response was essentially additive. Mammalian cell transformation activities were non-additive, indicating a compositional effect on the expression of transforming agents in the complex mixture.     

Coal liquefaction using a hydrogenated creosote oil solvent: H-atom transfer from hydrogen donor components in the solvent

The presence of hydroaromatic, hydrogen donor components in a coal-derived solvent is one of the more important factors in the successful operation of a non-catalytic coal liquefaction process. Various hydrogen donor species present in a hydrogenated creosote oil have been identified. Their rate of disappearance under conditions that are consistent with a short residence time coal liquefaction process has been used to rank the reactivities of the various hydrogen donors. 1,2,3,10b-Tetrahydrofluoranthene was found to be an exceptional donor while 4,5-dihydropyrene, the hexahydropyrenes and 9,10-dihydrophenanthrene were found to be quite active. Sym.-octahydrophenanthrene and 2a,3,4,5-tetrahydroacenaphthene exhibited moderate activity. Tetralin and the four methyltetralin isomers were found to be unreactive under the coal liquefaction conditions employed.     

Unsaturated polyesters. II. Structure and properties of polyester resins based on cinnamylsuccinic acid

Unsaturated Polyester resins were prepared by the reaction of cinnamylsuccinic acid with saturated diols, namely, ethylene, diethylene, propylene, dipropylene, tetramethylene, and hexamethylene glycols, and the unsaturated diols, namely, 1,4-butene- and 1,4-butynediols. All the polyester resins obtained have been characterized and were found to cure with styrene, with relatively low conversions. The properties of the cured polyesters in the form of films were determined. IR and ¹H-NMR spectroscopy were used for both qualitative and quantitative analyses of the polyesters and their hydrolyzate products, after curing with styrene.     

Impact Fracture of Thermally Tempered Glass Helicopter Windshields

In-service fracture of helicopter windshields was studied. Simulated catastrophic fracture tests were conducted by firing alumina and steel spheres onto stationary tempered and as-received glass panels. The results were studied by Hertzian analysis and modified Auerbach's relations. Thermally tempered glass shows much higher impact resistance than that estimated from superposition of residual stresses. Subcritical impact sites exhibit slow crack growth in tempered plates, eventually leading to fracture of the entire plate.     

Fractoemission from Lead Zirconate-Titanate

We present measurements of the electron, positive ion, and photon emission accompanying the fracture in vacuum of poly-crystalline 95/5 lead zirconate-titanate. The intensities of the charged-particle components of this fractoemission are shown to depend strongly on the direction (relative to the direction of fracture) and magnitude of polarization. The most intense emission is observed when the fracture surfaces are perpendicular to the polarization direction. The emission intensity increases monotonically with polarization. These results are interpreted in terms of a model involving charge separation on the fracture surfaces leading to a microdischarge during fracture. Implications to the interpretation of triboluminesence effects are discussed.     

Experimental Procedure for Determining Transport Properties of Oxide Scales

To determine the transport properties of oxide scales growing on an alloy, a laboratory apparatus was developed which allows plotting of characteristic V = f (i) curves and oxidation with an applied electric field. The apparatus and formalism used are described; it appears that such experimental procedures allow determination of the mean ionic transport number, ti; the conductivity values σ, σ_i, and σ,_e; and the effective charge, Z*, of the moving species in the oxide scale (A1₂O₃ in the present case).     

Physical and chemical characteristics of butterfat fractions obtained by crystallization from molten fat

Both summer and winter butterfats were fractionated using a laboratory procedure which was designed to simulate a commercial fractionation process. The process is based on a slow, controlled cooling of the melted fat, a short stabilization time at the fractionation temperature, and separation of the crystals from the liquid oil by vacuum filtration using a stainless steel perforated disc. Fractionation temperatures of 29, 26, 23 and 19 C for winter butterfat and 29 and 19 C for summer butterfat were used to obtain solid and liquid fractions at each temperature. Three replications at each temperature showed good reproducibility of results. The fractions were characterized by their fatty acid and triglyceride compositions, melting and crystallization behavior, iodine value, peroxide value and melting point. Presented at the AOCS meeting in Philadelphia in May 1985.     

The function of bleaching earths in the processing of palm,palm kernel and coconut oils

The results presented in the literature, which attempt to elucidate the mechanisms by which triglyceride oils are bleached by earths, are reviewed. The impact of this work and how the mechanistic proposals affect changes in oil properties are considered, with particular emphasis on the needs of the palm oil processor. Important properties include color, metals and phosphorus content and oxidative stability of the oil. Investigations made in our own laboratories have been aimed at elucidating the effect of varying physical and chemical properties of the bleaching earth on the quality of bleached and deodorized oils. Techniques used in this work are pore-size distribution, surface area, scanning and transmission electron microscopy and a variety of chemical and X-ray analysis methods. The ability to vary such parameters in montmorillonite clays by alteration of process conditions to give materials with specific performance characteristics is demonstrated. Comparisons are made between acid-activated montmorillonites and other clay types.