Assessment of nitrification in groundwater filters for drinking water production by qPCR and activity measurement

In groundwater treatment for drinking water production, the causes of nitrification problems and the effectiveness of process optimization in rapid sand filters are often not clear. To assess both issues, the performance of a full-scale groundwater filter with nitrification problems and another filter with complete nitrification and pretreatment by subsurface aeration was monitored over nine months. Quantitative real-time polymerase chain reaction (qPCR) targeting the amoA gene of bacteria and archaea and activity measurements of ammonia oxidation were used to regularly evaluate water and filter sand samples. Results demonstrated that subsurface aeration stimulated the growth of ammonia-oxidizing prokaryotes (AOP) in the aquifer. Cell balances, using qPCR counts of AOP for each filter, showed that the inoculated AOP numbers from the aquifer were marginal compared with AOP numbers detected in the filter. Excessive washout of AOP was not observed and did not cause the nitrification problems. Ammonia-oxidizing archaea grew in both filters, but only in low numbers compared to bacteria. The cell-specific nitrification rate in the sand and backwash water samples was high for the subsurface aerated filter, but systematically much lower for the filter with nitrification problems. From this, we conclude that incomplete nitrification was caused by nutrient limitation.     

The effect of temperature on the removal of non-ionic surfactants during small-scale activated-sludge sewage treatment—I. Comparison of alcohol ethoxylates with a branched-chain alkyl phenol ethoxylate

The degree of biodegradability of three non-ionic surfactants has been assessed using small-scale activated-sludge sewage treatment plants. The effect of temperature on biodegradability was studied by operation at 15°, 11° and 8°C.The two alcohol ethoxylate surfactants tested were well degraded at all three operating temperatures. The alkyl phenol ethoxylate surfactant tested was well degraded at 15°C but at lower temperatures the biodegradability was dependent on concentration. At 5 mg 1⁻¹, greater than 90 per cent removal was achieved but at 20 mg 1⁻¹ the degree of removal fluctuated between 40 and 95 per cent at 11°C and between 20 and 80 per cent at 8°C.The present results have been compared with those obtained using the same surfactants in community trials at a small sewage works employing biological filtration. Although a similar temperature effect was observed with the alkyl phenol ethoxylate, the biodegradabilities obtained in the laboratory were consistently greater than those obtained at the sewage works, perhaps because of the constant conditions of the laboratory test.     

Interstitial inorganic phosphorus concentrations in lakes Mendota and Wingra

Interstitial P levels in Lake Mendota and Lake Wingra were evaluated as a function of season and water column and sediment depth. Interstitial water was obtained by the centrifugation-filtration method. Temporal variations were observed over the entire 15 cm sediment depth interval examined in all four locations evaluated. Interstitial reactive P (IRP) levels in Lake Mendota ranged from 0.014–1.67 mg l⁻¹ at the 5–6 m water column depth and from 1.20–5.75 mg l⁻¹ at the 18–19.5 m depth. IRP levels in Lake Wingra ranged from 0.029–2.15 mg l⁻¹ at 3.5 m and from 0.191–3.96 mg l⁻¹ at 2 m. Variations in interstitial P were attributed to variations in oxidation state of Fe as influenced by oxygen transport and reduction rates.     

Upgrading the Activated-Sludge Process for Total Nitrogen Removal in Hong Kong

In order to protect the sensitive waters in Tolo harbour (Hong Kong), Sha Tin and Tai Po sewage-treatment works were first designed to remove 70% of the nitrogen load from the sewage. Since then, due to continuing serious eutrophication problems in the harbour, both plants have been modified to increase the removal efficiency to 90%.
The modifications were based on the Bardenpho process. However, the designers of the two plants adopted different approaches to process intensity, complexity and control of bacterial foam. At Sha Tin, the average monthly results have shown an increase of total nitrogen removal from 60–70% to about 80% since its completion. The addition of methanol was found to be ineffective on further enhancement of the denitrification rate due to difficulties in the apportioning of the second anoxic zone. The overall monthly results for Tai Po have also shown an increase in the removal rate to about 80%, even though 90% was achieved for a short period of time. The major problem encountered at the latter plant was that the process design did not provide an effective control on bacterial foaming, which had affected the smooth operation of the process.     

Sensory evaluation of drinking water by consumer panels

The human senses play an important role in assessing the quality of food and of the environment. Particularly the chemical senses of taste and smell determine the pleasantness of foods and drinks and may provide a warning mechanism for the presence of more or less toxic contaminants. Even after the recent rapid development of powerful analytical techniques the human nose can easily detect trace amounts of chemicals at levels manytimes lower than the analytical detection limits.Although taste and odour assessment of drinking water has been practized inmany waterworks laboratories by small panels, relatively unreliable results were obtained and such sensory data played up till now only a minor role in the management of the water treatment plant. More sophisticated and reliable methods for sensory water quality evaluation are discussed. Special attention is given to the characteristics of the human senses of taste and smell, to which the methodology of sensory assessment should be better adapted. High numbers of observations on a sample are generally needed, for which purpose the use of large panels has to be realized. In this respect the help of large consumer panels is an alternative for the presently often used small laboratory groups. As an example the preliminary results of a large ongoing experiment of sensory water quality assessment by 2 consumer panels of 100 persons each in the Rotterdam area are discussed. Drinking water quality is judged at the consumer homes every week. The experiment started September 1979 and will be continued for one year.     

The direct measurement of ppm levels of uranium in soils using high-resolution Ge(Li) gamma-ray spectroscopy

The direct determination of ²³⁸U in various soil samples was done by measuring the 63.3-keV transition from the decay of the first daughter ²³⁴Th. Potential errors resulting from the chemical non-equilibrium of ²³⁸U with its daughters are thus avoided. The method sensitivity is 1 ppm compared to the 35 ppm obtainable by employing the 1001-keV gamma ray. A Ge(Li) gamma-ray spectrometer is the only analytical tool required. Examples are offered that demonstrate the usefulness of the technique for routine, inexpensive environmental monitoring of uranium. The technique also has the capability of providing information on the ²³⁸U/²³⁵U isotopic ratio.     

Online Documentation for Engineering Software: A Hypertext Application

Abstract: This article describes the use of 'hypertext' as a means to document engineering software online. An extensive hypertext document can be built with relative ease using an authoring tool. Hypertext documents enhance the learning process through the association of facts. The user has the freedom to arrange his/her own study sequence in a particular session. The article provides a brief introduction to the hypertext technology and authoring tools, and describes a Mohr's Circle program, which has been developed to explore the use of hypertext for online users' manuals. The strengths and weaknesses of the software tool, KnowledgePro, as well as the development techniques, are discussed.     

Hybrid reactor for priority pollutant-trichloroethylene removal

The present study was initiated to explore the potential of a hybrid biological reactor, combining trickling filter (TF) and activated sludge process (ASP), to treat wastewater containing trichloroethylene (TCE) at ambient temperature at different hydraulic retention time (HRT). The biofilm acclimation was achieved in 55-60 days with gradual increase in TCE concentration from 1 mg/l to 100 mg/l with a parallel increase in the concentration of substrate sodium acetate and other nutrients. COD and TCE concentration were taken as prime parameters for monitoring the growth of biofilm. During acclimation COD removal varied between 54.6-97.5% while TCE was removed 72.6-99.9%. HRT study was performed after acclimation. The removal efficiency increased with decreasing flow rate with maximum TCE removal (99.99%) at 6 l/d corresponding to an HRT of 28 h (TF 18 h + ASP 10 h). This was followed by a C:N:P ratio study. A ratio of 100:20:1 led to the sustenance of maximum TCE removal. Maximum TCE removal (99.99%) was observed at a substrate:cosubstrate ratio of 100:1. A pH of 7.4 +/- 0.2 was found to be optimum for degradation. Finally, volatilization losses were estimated to be 18.5%. A mass balance gave an efficiency of 81.51% for biological removal of TCE.