Solar/UV-induced photocatalytic degradation of three commercial textile dyes.

The photocatalytic degradation of three commercial textile dyes with different structure has been investigated using TiO(2) (Degussa P25) photocatalyst in aqueous solution under solar irradiation. Experiments were conducted to optimise various parameters viz. amount of catalyst, concentration of dye, pH and solar light intensity. Degradation of all the dyes were examined by using chemical oxygen demand (COD) method. The degradation efficiency of the three dyes is as follows: Reactive Yellow 17(RY17) > Reactive Red 2(RR2) > Reactive Blue 4 (RB4), respectively. The experimental results indicate that TiO(2) (Degussa P25) is the best catalyst in comparison with other commercial photocatalysts such as, TiO(2) (Merck), ZnO, ZrO(2), WO(3) and CdS. Though the UV irradiation can efficiently degrade the dyes, naturally abundant solar irradiation is also very effective in the mineralisation of dyes. The comparison between thin-film coating and aqueous slurry method reveals that slurry method is more efficient than coating but the problems of leaching and the requirement of separation can be avoided by using coating technique. These observations indicate that all the three dyes could be degraded completely at different time intervals. Hence, it may be a viable technique for the safe disposal of textile wastewater into the water streams.     

Equipment for Testing Sheet Structural Materials under Biaxial Tension. Part 2. Testing by Biaxial Loading in the Plane of the Sheet

We analyze specific features of the design of equipment used for mechanical testing of sheet structural materials under the conditions of biaxial static, cyclic, or dynamic loading. We propose original solutions of the problems related to the fatigue testing of crosslike specimens performed without using complex hydraulic systems and their dynamic testing carried out by using very simple testing machines for uniaxial tension–compression.     

Prediction of processing-induced distortion of curved flanged composite laminates

It is well known that angles in composite parts contract as they are cooled down from the curing temperature, this is often referred to as spring-in. It is caused mainly by the significantly different thermal contractions and cure shrinkage's experienced between the fibre direction and the through-thickness direction during the manufacturing process. A number of works have reported on the spring-in of straight angle composite parts. However, little has been done to investigate the distortion of curved flanged composite parts, which will distort differently owing to the introduction of the additional curvature, thus constraint.

In the present work, the distortion of the circularly curved flanged laminates is studied numerically. The finite element method is used to predict the processing-induced distortion of the part with two different approaches. In the first approach, the shear angles of the composite plies are predicted by a draping analysis. The effect of the fibre shearing on the mechanical properties of the laminates is considered in the model used to predict the distortion. The second simplified approach assumes that the in-plane properties of the laminates are isotropic. The results obtained by these two approaches are compared with those obtained experimentally.     

Makespan estimation and order acceptance in batch process industries when processing times are uncertain

Batch process industries are characterized by complex precedence relationships between operations, which renders the estimation of an acceptable workload very difficult. A detailed schedule based model can be used for this purpose, but for large problems this may require a prohibitive large amount of computation time. We propose a regression based model to estimate the makespan of a set of jobs. We extend earlier work based on deterministic processing times by considering Erlang-distributed processing times in our model. This regression-based model is used to support customer order acceptance. Three order acceptance policies are compared by means of simulation experiments: a scheduling policy, a workload policy and a regression policy. The results indicate that the performance of the regression policy can compete with the performance of the scheduling policy in situations with high variety in the job mix and high uncertainty in the processing times. Correspondence to: C.V. Ivanescu     

Simple concepts for ion source improvement

We report on improvements in the overall intensity of a sputter ion source that evolved originally from an NEC MCSNICS. Beam output increases benefit both AMS measurements and nuclear physics experiments using low natural abundance beams. In particular, minor changes in source geometry suggested by a combination of electrostatic calculations and simple design principles have yielded increases in extracted negative ion intensity of nearly a factor of 4.     

Nanocell logic gates for molecular computing

Molecular electronics seeks to build electrical devices to implement computation - logic and memory - using individual or small collections of molecules. These devices have the potential to reduce device size and fabrication costs, by several orders of magnitude, relative to conventional CMOS. However, the construction of a practical molecular computer will require the molecular switches and their related interconnect technologies to behave as large-scale diverse logic, with input/output wires scaled to molecular dimensions. It is unclear whether it is necessary or even. possible to control the precise regular placement and interconnection of these diminutive molecular systems. This paper describes genetic algorithm-based simulations of molecular device structures in a nanocell where placement and connectivity of the internal molecular switches are not specifically directed and the internal topology is generally disordered. With some simplifying assumptions, these results show that it is possible to use easily fabricated nanocells as logic devices by setting the internal molecular switch states after the topological molecular assembly is complete. Simulated logic devices include an inverter, a NAND gate, an XOR gate and a 1-bit adder. Issues of defect and fault tolerance are addressed.     

A practical controller for explicit rate congestion control

This paper examines congestion control for explicit rate data networks. The available bit rate (ABR) service category of asynchronous transfer mode (ATM) networks serves as an example system, however, the results of this paper are applicable to other explicit rate systems as well. After a plant model is established, an adaptive control strategy is presented. Several algorithm enhancements are then introduced. These enhancements reduce convergence time, improve queue depth management, and reduce parameter bias. This work differentiates itself from the other contributions in the area of rate-based congestion control in its balanced approach of retaining enough complexity as to afford attractive performance properties, but not so much complexity as to make implementation prohibitively expensive     

Cluster analysis in industrial market segmentation through artificial neural network

Market segmentation has commonly applied cluster analysis. This study intends to make the comparison of conventional two-stage method with proposed two-stage method through the simulated data. The proposed two-stage method is the combination of self-organizing feature maps and K-means method. The simulation results show that the proposed scheme is better than the conventional two-stage method based on the rate of misclassification.