IEEE-PES Transmission and Distribution Conference and Exposition Call for Papers

Static network-related system voltage stability margin (VSM) depends on the availability of reactive power to support the transport of real power from sources to sinks. Based on this premise, the total VAr loss is minimized in the unified OPF framework considering real and reactive power controllers, and its effect on VSM is studied. Studies are conducted on a three-bus system, the IEEE 30-bus system, and a 191-bus Indian electric power system, and their results are reported.     

Comparison of two current modulation strategies for matrixconverters under unbalanced input voltage conditions

In this paper, the input current performance of matrix converters is analyzed, especially with reference to the operating conditions determined by unbalanced supply voltages. The space-vector modulation (SVM) technique is utilized to calculate the duty cycles of the active voltage vectors that must be applied, in each switching cycle period, in order to satisfy the input and output requirements. A detailed theoretical analysis of the input current harmonic content under unbalanced input voltage conditions is presented for two different current modulation strategies. On the basis of numerical simulations as well as measurements on a laboratory prototype setup, the strategies' performance are compared and the validity of the theoretical investigation confirmed. It is concluded that, when the input voltages are unbalanced to a significant extent, a dynamic input current modulation strategy has to be preferred, since a lower harmonic line current distortion will appear     

Comparisons of PWM and one-cycle control for power amplifier with multilevel converter

Based on the concepts of cascade multilevel converters and one-cycle technique, comparisons are conducted to characterize the distortion of the pulsewidth modulation (PWM) and one-cycle control methods that were applied to converters. Simulation results for the different control schemes are obtained in PSIM software initially to see the effect of one-cycle control different from that of PWM control. Through the comparisons, the advantages and disadvantages are identified for each method. The one-cycle scheme is better than PWM control in reducing undesirable harmonics and tracing dynamic waveforms. Simulation and experimental results are also provided to verify the conclusions.     

Photovaractor for remote optical control of microwave circuits

A photovaractor for the remote optical control of microwave circuits was studied. The photovaractor was fabricated as a p-i-n photodiode placed in a pigtailed fiber optical module. The study of the impedance in the frequency range up to 3 GHz in darkness and under illumination has shown that the photovaractor capacitance strongly depends on the incident optical power. The capacitance variation of the photovaractor diode under illumination is discussed     

Relation between abrasion resistance and flexural strength of high volume fly ash concrete

In this paper, abrasion of high volume fly ash (HVFA) concretes made with 50% and 70% of cement replacement with fly ash was assessed in terms of its relation to flexural tensile strength. Comparisons were made between normal Portland cement (NPC) concrete and fly ash concrete. Comparisons were also made between fly ash concretes. Investigation results have shown that the abrasion resistance increased as flexural tensile strength increased. Analysis of the results showed that, for concrete with tensile strength of greater than 4–5 MPa, the abrasion resistance of HVFA concrete with 70% replacement with cement was found to be higher than that of counterpart control NPC concrete and concrete made with 50% fly ash. The comparison between the relation of abrasion to compressive strength and abrasion to flexural tensile strength made in terms of R² of the linear regression showed that a stronger relation existed between abrasion and flexural tensile strength than that of abrasion to compressive strength of the concrete studied.

---

Résumé L'étude a pour but d'estimer la relation entre la résistance à l'usure avec la résistance à la traction en flexion des bétons contenant de 50% et 70% de cendres volantes. On a comparé le béton pur au béton contenant des cendres volantes. Des comparaisons ont été faites également entre les différents bétons contenant des cendres volantes. Les resultats de la recherche ont montré que la résistance à l'usure augmente à mesure que la résistance à la traction en flexion de 4∼5 MPa ont une résistance à l'usure plus grande s'ils contienneint 70% de cendres volantes que s'ils étaient purs ou contenaient 50% de cendres volantes. La comparaison entre les relation de la résistance à l'usure en compression et de la résistance à l'usure en traction a été établie en termes de R² de la régression linéaire. On a prouvé qu'une relation plus forte a été obtenue entre la résistance à l'usure et la résistance à la traction en flexion par rapport à la résistance à l'usure en compression du béton étudié.

     

Propagation of flicker in electric power networks due to windenergy conversions systems

Wind energy conversion systems (WECS) produce fluctuating output power, which may cause voltage fluctuations and flicker. Flicker assessment in networks may be difficult since its evaluation requires long computing time and special procedures to calculate the flicker severity index, Pst. In this paper, a frequency domain method to study flicker propagation is presented. This method is based on propagation of frequency components from WECS output currents throughout the grid. In this way, a fast flicker analysis in a network of any size can be performed. Also, an algorithm for flicker measurement in the frequency domain, which allows Pst calculation, is proposed. Several study cases have been performed, and results have been compared with time domain simulations, showing good agreement between them     

Mechanism analysis of gate-induced drain leakage in off-state n-MOSFET

An analytical expression for both band-to-band and band-trap-band indirect tunnelings is used to study the gate-induced drain leakage (GIDL) current of MOSFETs measured before and after hot-carrier stress. The voltage and temperature dependence of GIDL are characterized. Both results show that interface traps situated near the midgap participate in the conduction of GIDL, and band-trap-band indirect tunneling could be the major mechanism. This is further supported by the fact that the percentage increase in GIDL induced by hot-carrier stress is about the same as the corresponding increase in interface-trap density. On the other hand, under low-field conditions, trap-assisted Poole–Frenkle emission dominates over tunneling for temperatures even well below room temperature.     

A look at court appointed psychiatric evaluations in Israel with special reference to criminal liability

This article presents the data collected from 128 court appointed psychiatric evaluations (CAPEs) and their analysis. Issues addressed are: the link between type of criminal offence and mental disorder; rate of recidivism; efficacy of the early detection and follow-up systems; inherent psychiatric dilemmas; unacceptable lacuna in information recorded in the CAPEs; and the babel of legal and psychiatric terms. We advocate that a combined effort be made by the legal and psychiatric fraternities to create a uniform and standardized CAPE.