The direct measurement of ppm levels of uranium in soils using high-resolution Ge(Li) gamma-ray spectroscopy

The direct determination of ²³⁸U in various soil samples was done by measuring the 63.3-keV transition from the decay of the first daughter ²³⁴Th. Potential errors resulting from the chemical non-equilibrium of ²³⁸U with its daughters are thus avoided. The method sensitivity is 1 ppm compared to the 35 ppm obtainable by employing the 1001-keV gamma ray. A Ge(Li) gamma-ray spectrometer is the only analytical tool required. Examples are offered that demonstrate the usefulness of the technique for routine, inexpensive environmental monitoring of uranium. The technique also has the capability of providing information on the ²³⁸U/²³⁵U isotopic ratio.     

Online Documentation for Engineering Software: A Hypertext Application

Abstract: This article describes the use of 'hypertext' as a means to document engineering software online. An extensive hypertext document can be built with relative ease using an authoring tool. Hypertext documents enhance the learning process through the association of facts. The user has the freedom to arrange his/her own study sequence in a particular session. The article provides a brief introduction to the hypertext technology and authoring tools, and describes a Mohr's Circle program, which has been developed to explore the use of hypertext for online users' manuals. The strengths and weaknesses of the software tool, KnowledgePro, as well as the development techniques, are discussed.     

Hybrid reactor for priority pollutant-trichloroethylene removal

The present study was initiated to explore the potential of a hybrid biological reactor, combining trickling filter (TF) and activated sludge process (ASP), to treat wastewater containing trichloroethylene (TCE) at ambient temperature at different hydraulic retention time (HRT). The biofilm acclimation was achieved in 55-60 days with gradual increase in TCE concentration from 1 mg/l to 100 mg/l with a parallel increase in the concentration of substrate sodium acetate and other nutrients. COD and TCE concentration were taken as prime parameters for monitoring the growth of biofilm. During acclimation COD removal varied between 54.6-97.5% while TCE was removed 72.6-99.9%. HRT study was performed after acclimation. The removal efficiency increased with decreasing flow rate with maximum TCE removal (99.99%) at 6 l/d corresponding to an HRT of 28 h (TF 18 h + ASP 10 h). This was followed by a C:N:P ratio study. A ratio of 100:20:1 led to the sustenance of maximum TCE removal. Maximum TCE removal (99.99%) was observed at a substrate:cosubstrate ratio of 100:1. A pH of 7.4 +/- 0.2 was found to be optimum for degradation. Finally, volatilization losses were estimated to be 18.5%. A mass balance gave an efficiency of 81.51% for biological removal of TCE.     

Sulfolane biodegradation potential in aquifer sediments at sour natural gas plant sites

Sulfolane is used in the treatment of sour natural gas. It is a highly water soluble compound that has been introduced into soils and groundwaters at a number of sour gas processing plant sites. Aquifer sediments from contaminated locations at three sites in western Canada were assessed for microbial activity and their ability to degrade sulfolane under aerobic and five anaerobic (nitrate-, Mn(IV)-, Fe(III)-, sulfate- and CO₂-reducing) conditions. The microcosms were supplemented with 200 mg/L sulfolane and adequate supplies of N, P, and the appropriate terminal electron acceptor. Microcosms containing contaminated aquifer sediments from each of the three sites were able to degrade sulfolane aerobically at 8°C and 28°C, and the biodegradation followed zero-order kinetics. The lag times before the onset of sulfolane biodegradation were shorter when sulfolane-contaminated sediments were used as inocula than when uncontaminated soils were used. No anaerobic sulfolane biodegradation was observed at 28°C, nor was sulfolane biodegradation observed at 8°C under Fe(III)-, sulfate- and CO₂-reducing conditions. At 8°C, anaerobic degradation of sulfolane coupled to Mn(IV) reduction was observed in microcosms from two sites, and degradation coupled to nitrate reduction was seen in a microcosm from one of the contaminated sites.     

Microbial degradation of a new detergent builder, carboxymethyltartronate (CMT), in laboratory activated sludge systems

An approach for determining the biodegradability of new detergent builders under activated sludge conditions was investigated using carboxymethyltartronate (CMT) as a representative material. Preliminary biodegradation studies in river water and activated sludge indicated a 4–8 week period before acclimation to and biodegradation of CMT. More detailed studies in continuous flow activated sludge units established that acclimation to CMT degradation was not readily lost upon CMT starvation, could be maintained at low temperatures and under conditions of variable organic loading, and was unaffected by the presence of a variety of metal ions. The laboratory evaluation of CMT, which stressed the use of natural sewage/activated sludge systems in place of tests employing commercially available laboratory media, would predict CMT to be satisfactorily removed in full-scale activated sludge waste treatment plants.     

Treatment of poultry manure wastewater using a rotating biological contactor

A pilot scale, six stage rotating biological contactor was used to evaluate the feasibility of this process for the stabilization of liquid animal manures. Total disc surface area was approx. 16.7 m². Treatment efficiencies were determined at various waste strengths and influent flow rates.With loading rates of 14.7–322 g m⁻² day⁻¹, the average COD reduction was 61%. With loading rates of 4.88-24.4 g m⁻² day⁻¹, the average BOD₅ reduction was 87%. Total nitrogen removal averaged approximately 30% for the entire study. Mixed liquor oxygen uptake rates were generally in excess of 80 mg 1⁻¹ h⁻¹.Clarified effluent was non-odorous and suitable to be reused for manure flushing or spray irrigation. Treatment was not sufficient to permit effluent discharge to surface waters.     

A base for building codes and construction methods in karst-prone regions

The history of the development of methodical and regulatory documents relative to construction in karst-prone areas is cited. The basic content of existing regulatory documents is presented, and attention is focused on some of their deficiencies. Specific approaches to the development of a standard for construction in karst-prone areas are proposed. __________ Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 6, pp. 21–24, November–December, 2006.