Groundwater problems in surface coal mining in Scotland

The paper reviews the problems encountered with groundwater in surface mining in Scotland. The problems which occur at various stages of the mining process from initial exploration to mine planning and final restoration are referred to. Special consideration is given to mine drainage and pumping methods.     

用氮气和戊基黄药浮选时黄铁矿的低电位疏水状态

为了解释和查明N2TEC浮选法的基本原理，本文报道了在用戊基钾黄药(PAX)作捕收剂时，黄铁矿的低电位疏水状态的研究成果。新制定的N2TEC浮选法的目的是提高难处理含金硫化矿金回收率。在典型的N2TEC浮选法中，用氮气代替空气作为浮选气体，戊基钾黄药作为评选含金黄铁矿颗粒的捕收剂。l997年3月，第一个N2TEC浮选工艺在内华达州Lone Tree矿山浮选厂投产，一直操作至今。根据电化学校制接触角测量结果，研究了黄铁矿的低电位、低pH疏水状态与浮选变量(pH、气相组成、捕收剂浓度和黄铁矿电位)之间的关系。     

Minimierung der Umbauzeiten bei Stahlwerksmodernisierungen am Beispiel eines Stranggießanlagen-Umbaues

In November 2000 the Belgian stainless steel producer UGINE & ALZ Belgium nv, a company of the Arcelor Group, awarded VAI a contract for the upgrading and expansion of their steelmaking plant. The overall project included the revamping and supply of new equipment and systems for the steelmaking, continuous casting and environmental protection facilities. An essential part of this ambitious modernization program was the upgrading and expansion of the existing single-strand slab caster, with an output of 600 000 t/a, to a combined single- or twin-strand slab caster with a nominal production capacity of 1.2 million tons — the world’s largest stainless steel slab caster. All upgrading and installation activities had to be carried out within an extremely tight caster shut-down period of 21 days only in order to minimize production losses. This paper discusses the innovative project management solutions implemented in combination with extensive preassembly activities and workshop testing to assure the successful outcome of this project.     

Experience of Using Energy Effects in Ore Preparation and Concentration of Ferruginous Quartzites

The possibility is considered for changing the physico-mechanical and technological properties of ferruginous quartzites of the Mikhailovsk deposit by means of dosed energy actions.     

Prediction of High Methane-Recovery Regions and Gas Extraction Technology Based on Geodynamic Zoning of Bowels

An analysis is performed for the existing hypotheses and theories used for calculating the technological parameters of operations on methane extraction from coal seams. The priority of geodynamic processes in methane collector formation, as well as the methods applied for the morphometry and processing of the remote probing data are substantiated. The urgency is shown for the investigation into the autooxidation and other exothermic reactions proceeding in coal seams and leading to methane transition to the free state.     

'EUROPART'. Airborne particles in the indoor environment. A European interdisciplinary review of scientific evidence on associations between exposure to particles in buildings and health effects

The relevance of particle mass, surface area or number concentration as risk indicators for health effects in non-industrial buildings has been assessed by a European interdisciplinary group of researchers (called EUROPART) by reviewing papers identified in Medline, Toxline, and OSH. Studies dealing with dermal effects or cancer or specifically addressing environmental tobacco smoke, house dust-mite, cockroach or animal allergens, microorganisms and pesticides were excluded. A total of 70 papers were reviewed, and eight were identified for the final review: Five experimental studies involving mainly healthy subjects, two cross-sectional office studies and one longitudinal study among elderly on cardiovascular effects. From most studies, no definite conclusions could be drawn. Overall, the group concluded that there is inadequate scientific evidence that airborne, indoor particulate mass or number concentrations can be used as generally applicable risk indicators of health effects in non-industrial buildings and consequently that there is inadequate scientific evidence for establishing limit values or guidelines for particulate mass or number concentrations.     

Two-step seismic limit state design procedure based on non-linear LRFD and dynamic response analyses

Recently, the limit state design (LSD) or performance-based design have got popularity in the field of building design in Japan as well as in other countries. In the two design methods the structural reliability theory plays an essential role in setting design criteria as well as demonstrating the target reliability level to society. However, the conventional load and resistance factor design (LRFD) has been basically formulated supposing that safety checking is done on the basis of linear assumption of member forces and displacement. Therefore, when applying the LRFD for seismic design, for more accurate treatment of the non-linearity, a new procedure has to be explored especially for the ultimate limit state. Although several procedures for the structural reliability evaluation, treating non-linear displacement responses, have been proposed, they require complex procedures that may not be used in the practical design process. Accordingly, for applying it to a seismic LSD format based on the probabilistic concept, it is essential to manage two important requirements at the same time, accuracy and simplicity of procedure. In the present study, a new design format using the following two-step procedure is proposed to maintain both accuracy and simplicity; (1) a non-linear LRFD formulation, and (2) a formulation based on non-linear dynamic response analysis. Also, two design examples are presented.     

Treatment of gas-phase methanol in conventional biofilters packed with lava rock

The performance of laboratory scale methanol-degrading biofilters packed with lava rock was checked during almost 1 yr under different conditions. The biomass concentration and biomass adaptation of the inoculum dramatically affected the start-up and the performance of the systems during the first stages of operation. A fast start-up was obtained when using concentrated and adapted inocula, while diluted or non-adapted inocula proved to be much less efficient. The performance of the reactor during long-term operation was significantly affected by the toxic load and moisture content of the gas. Critical loads between 120 and 280 g/m(3)h were reached during different phases of the study. The reactor had a high stability to EBRT changes when working at values between 48.0 and 91.1s, showing little or no negative effect when decreasing the EBRT. Hardly any difference was observed regarding performance when using either a downflow or upflow feed, although slightly better results were obtained when working in a downflow mode.     

An extension of ASM2d including pH calculation

This paper presents an extension of the Activated Sludge Model No. 2d (ASM2d) including a chemical model able to calculate the pH value in biological processes. The developed chemical model incorporates the complete set of chemical species affecting the pH value to ASM2d describing non-equilibrium biochemical processes. It considers the system formed by one aqueous phase, in which biochemical processes take place, and one gaseous phase, and is based on the assumptions of instantaneous chemical equilibrium under liquid phase and kinetically governed mass transport between the liquid and gas phase. The ASM2d enlargement comprises the addition of every component affecting the pH value and an ion-balance for the calculation of the pH value and the dissociation species. The significant pH variations observed in a sequencing batch reactor operated for enhanced biological phosphorus removal were used to verify the capability of the extended model for predicting the dynamics of pH jointly with concentrations of acetic acid and phosphate. A pH inhibition function for polyphosphate accumulating bacteria has also been included in the model to simulate the behaviour observed. Experimental data obtained in four different experiments (with different sludge retention time and influent phosphorus concentrations) were accurately reproduced.