主动约束层阻尼板结构动力学建模研究

将有限元法和GHM法相结合，给出了建立主动约束层阻尼（ACLD）板结构动力学模型的新方法。建模时，考虑到粘弹材料（VEM）的纵向位移影响，采用GHM方法描述VEM的本构关系，解决了VEM的力学特性随温度和频率变化的难点，避免因VEM的复杂本构关系而产生的微分积分方程。算例表明本文给出的建模方法是准确的，ACLD结构能够有效控制结构振动。     

Rendering of Surface and Volume Details in Volume Data*

Aiming at the detail rendering in volume data, a new volume illumination model, called Composed Scattering Model (CSM), is presented. In order to enhance different details in volume data, scattering intensity is decomposed into volume scattering intensity and surface scattering intensity with different weight functions. According to the Gauss probability distribution of gray and gradient of data, we propose an accurate method to detect the materials in a voxel, called composed segmentation. In addition, we discuss the principle of constructing these weight functions based on the operators defined in composed segmentation. CSM can generate images containing more details than most popular volume rendering models. This model has been applied to the direct volume rendering of 3D data sets obtained by CT and MRI. The resultant images show not only rich details but also clear boundary surfaces. CSM is demonstrated as an accurate volume rendering model suited for detail enhancement in volume data sets.     

Characteristics of aperture coupled microstrip antennas withvarious radiating patches and coupling apertures

A full wave moment method is applied to the analysis of aperture coupled microstrip antennas, in which all components of the electric and equivalent magnetic surface currents are considered. The electric current distributions on the rectangular patch for different coupling aperture positions are presented with their radiation patterns. The effects of the coupling aperture shape and size on the input impedance and radiation performance are also discussed. As an example of new radiators, slotted patches are studied, and it is shown that they can be used to achieve dual-frequency operation     

Quantitative NMR spectroscopy by matrix pencil methods

The matrix pencil (MP) method, based on the singular value decomposition (SVD), is applied to quantitative NMR spectroscopy. Its relationship to other SVD-based methods is also presented. Simulations and applications are given to demonstrate the capability of superior performance.©1993 John Wiley & Sons Inc     

先进的现场供气设备--TCN640制氮机

对安装于深圳赛意法微电子有限公司的TCN640制氮机进行了简介。该设备由Air Liquide Japan Ltd．(日本液空公司)总体设计、制造，国内技术人员消化改进工艺，具有设备配置先进，安装简单，安全高效，能耗低等优点，其产品氮气的纯度已超过了高纯氮的技术指标。     

尾矿堆场对地下水及其水质影响的联合模拟研究

矿产资源开发利用后的废弃物堆场常处水文地质条件复杂、区域内外边界不规整的地带。为了客观评价堆场渗漏对地下水及其水质的影响,本文提出了适宜于复杂水文地质条件、复杂内外边界条件的地下水与地下水中污染物分布规律联合模拟分析的非构造网格FVM数值模型,通过在某化工行业尾矿堆场渗漏评价的具体应用,取得了很满意的结果。     

田关水厂设计方案的特点

湖北省田关水利工程管理处自来水厂（简称田关水厂），位于潜江市城区西郊，坐落在东荆河与田关河交汇处，是湖北省潜江市的最大乡镇水厂．现日供水规模为1．5t。田关水厂按“一次性规划，分三期实施”的原则进行设计，现已完成二期工程建设。田关水厂多年良好运行经验表明．从供水服务区需求出发．设计出适合经济社会发展和与当地资源环境条件相协调的水厂，是水厂长期高效运营的关键。     

蒸发式空冷器的运行实践

通过了解蒸发式空冷器的工作原理和结构,在运行实践过程中,对组成设备出现的问题提出相应的解决方案,并对部分组成设备提出改进的建议,以方便检修和维护,并提出了在冬季长时间高炉休风情况下保证水温不下降过低的解决方案。     

海水注入开发中剩余油饱和度评价研究

剩余油饱和度评价是油田水淹层测井评价中的重点和难点。当油田发生水淹后,储层的润湿性、地层水电阻率都将发生较大的变化,因此剩余油饱和度评价所需的处理参数必须重新确定。以南中国海某河流相沉积油田的储层在水淹后的剩余油饱和度评价中的关键参数研究为例,通过模拟油藏条件下的岩电实验和地层混合水矿化度与实际含水率的关系,研究探索求取剩余油饱和度评价关键参数的有效方法,应用中与实际生产符合较好,为此类开发油田的剩余油饱和度的精确评价奠定了基础。     

Silicon power MOSFET at low temperatures: A two-dimensional computer simulation study

Understanding how the structure of the unit-cell affects the cryogenic performance of a Si power Metal Oxide Semiconductor Field Effect Transistor (MOSFET) is an important step toward optimizing of the device for cryogenic operations. In this paper, numerical simulations of the Si power Double Diffused MOSFET’ (DMOS) are performed at room temperature and cryogenic temperatures. Physically based models for temperature dependent silicon properties are employed in the simulations. The performances of power DMOS’ with various unit-cell structures are compared at both room temperature and low temperatures. The effect of the cell structure on the on-resistance and breakdown voltage of the device are analyzed. The simulation results suggest that the device optimized for room temperature operation can be further optimized at cryogenic temperatures.