CAD8903机芯的视频音频转换电路设计

本文概要介绍了CAD 8903机芯采用国产集成电路CD7680,CD74211,DG4053实现音频、视频切换功能的电路,并对CD7680中音频信号处理电路的特殊用法进行了说明。     

罐装降脂减肥果茶生产工艺的研究

本文介绍了以各种中药材为主要原料 ,配以茶叶为辅料 ,运用先进的处理方法制备降脂减肥果茶的生产工艺、质量标准 ,并对确定生产工艺的几个主要问题进行了探讨     

活化铁矿粉技术及其效果评价

随勘探技术发展,高压超高压油气井日益增多,高密度、超高密度钻井液使用也越来越多.室内为配制密度大干2.4 g/cm3的超高密度钻井液,采用铁矿粉作为加重剂,并通过表面活化的原理对铁矿粉进行表面处理,以提高钻井液的固相容纳能力.该活化工艺借鉴了国内外相关产品的技术特点,以优选的表面活性剂为主要活化材料,并添加了无机盐和硅酸盐作为助吸附材料,提高了活化效果.室内实验表明,用活化铁矿粉加重的钻井液体系能保持良好的流变性和悬浮能力,能保证钻进时的正常循环,并且摩阻系数也低于常规铁矿粉加重钻井液.     

高性能小型扫描器

本文讨论了一种高性能小型扫描器的基本原理及扫描时序变换。对采用该小型扫描器的热成像系统也作了详细的介绍。该小型扫描器可满足多种用途。     

应用硫酸铵提高乌拉嗄金矿石浮选回收率试验研究

经试验发现应用一种化学肥料硫酸铵可以显著提高乌拉嘎金矿石的浮选回收率。闭路试验尾矿工艺矿物学鉴定证明，以硫酸铵作为调整剂的浮选过程中，微细粒单体金和金与石英边生体被有效回收。     

高分辨率电阻率测井仪在薄层评价中的应用

传统的测井仪器无法克服纵向分辨率和径向探测深度这一矛盾，高分辨率电阻率测井仪（HDRT）测量精度好、探测深度大且垂向分辨率高，能够准确识别薄互层、评价薄油气层，准确记录油层厚度，可为精细描述油气田地下地质状态提供更多依据。     

皮革去污上光用乳化蜡的研制

采用石蜡、微晶蜡为主要原料 ,经实验选出了以水为稀释剂的乳化型皮革去污上光蜡。实验优化的配方为石蜡 12 .5 g ,微晶蜡 8.0 g ,硬脂酸 8.5g ,三乙醇胺 5 .5 g ,水量 70 (涂用 )或 130 g(喷用 )。反应条件为乳化时间 4 0min ,搅拌速度 5 0 0～ 70 0r/min ,乳化温度 90℃。制得上光剂产品的去污性能可与用去污剂单独处理的效果相当 ,亮度可达 6 6 .7。     

电容检测纱线传感器转换特性对纱线不匀率测试的影响

讨论了纱线测试中受电容检测纱线传感器转换特性的非线性影响，测得的条干不匀率值与纱线的实际条干不匀率值之间的差异，从理论上估计了纱线在不同的电容检测槽内测试时，由于其截面充满系数不同而引起的相对差异，并用试验数据加以验证。     

Preparation and characterization of polyurethane microcapsules containing n‐octadecane with styrene‐maleic anhydride as a surfactant by interfacial polycondensation

A series of polyurethane microcapsules containing a phase change material (PCM) of n‐octadecane was successfully synthesized by an interfacial polymerization in aqueous styrene‐maleic anhydride (SMA) dispersion with diethylene triamine (DETA) as a chain extender reacting with toluene‐2,4‐diisocyanate (TDI). The average diameter of microPCMs is in the range of 5–10 μm under the stirring speed of 3000–4000 rpm. Optical and SEM morphologies of microPCMs had ensured that the shell was regularly fabricated with the influence of SMA. FTIR results confirmed that the shell material was polyurethane and the SMA chains associated on core material reacted with TDI forming a part of shell material. The shell thickness was decreasing in the range of 0.31–0.55 μm with the molar ratio of DETA/TDI from 0.84 to 1.35 and the weight of core material increasing from 40 to 80% (wt %). By controlling the weight ratio of PCM as 40, 50, 60, 70, and 80% in microPCMs, it was found using DSC that the T_m and T_c of microPCMs were in the range of 29.8–31.0^oC and 21.1–22.0°C and an obvious phase change had been achieved nearly the same temperature range of that of PCM. The results from release curves of microPCM samples prepared by 1.4, 1.7, and 2.0 g of SMA indicated the release properties were affected by the amount of the dispersant, which attributed to the emulsion effect and shell polymerization structure. The above results suggest that the shell structure of microPCMs can be controlled and the properties of microPCMs determined by shell will perform proper practical usage. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4996–5006, 2006     

Selective and nonselective wet etching of Zn0.9Mg0.1O/ZnO

Wet etch rates at 25°C for Zn_0.9Mg_0.1O grown on sapphire substrates by pulsed laser deposition (PLD) were in the range 300–1100 nm · min⁻¹ with HCl/H₂O (5×10⁻³−2×10⁻² M) and 120–300 nm · min⁻¹ with H₃PO₄/H₂O (5×10⁻³−2×10⁻² M). Both of these dilute mixtures exhibited diffusion-limited etching, with thermal activation energies of 2–3 kCal · mol⁻¹. By sharp contrast, the etch rates for ZnO also grown on sapphire by PLD were much slower in similar solutions, with rates of 1.2–50 nm · min⁻¹ in HCl/H₂O (0.01–1.2 M) and 12–54 nm · min⁻¹ in H₃PO₄/H₂O (0.02–0.15 M). The etching was reaction limited over the temperature range 25–75°C, with activation energies close to 6 kCal · mol⁻¹. The resulting selectivity of Zn_0.9Mg_0.1O over ZnO can be a high as ∼400 with HCl and ∼30 with H₃PO₄.