双－（p－N，N－二甲氨基苄叉）酮／二苯基碘鎓盐复合体系的电子转移光显色

不同的双－（ｐ－Ｎ，Ｎ－二甲氨基苄叉）酮ＤＭＢＫ和二苯基碘盐（ＤＰＩＯＦ）复合，组成一种新型的电子转移光显色体系，ＤＭＢＫ／ＤＰＩＯＦ复合体系在暗处有良好的热稳定性。在光作用下很快发生从激发态ＤＭＢＫ至ＤＰＩＯＦ的电子转移，并伴随ＤＭＢＫ染料的褪色，测得ＤＭＢＫ光褪色速度的次序为：ＤＭＢＡ＞ＤＭＢＰ＞ＤＭＢＨ。与此同时，电子转移又引起新的光显色反应，对ＤＭＢＡ化合物，在７００ｎｍ处出现新吸收峰。其光密度随光照时间而增长，然而，ＤＭＢＰ和ＤＭＢＨ体系这种光显色现象并未观察到，这可能由于它们的中间产物不能共平面的缘故，ＤＭＢＡ的光显色速度和最大密度明显取决于浓度和溶剂性质。本文对这种短波区光褪色和长波区光显色的光化学反应过程作了讨论。     

浅析聚乙烯装置后部造粒对粒料颜色的影响

分析了气相法生产线性低密度聚乙烯(LLDPE)装置粒料颜色变黄的原因，从工艺条件、造粒设备、添加剂等几方面提出了改进措施。     

煤液化技术研究现状及其发展趋势

能源安全和环境保护是我国21世纪应引起高度重视的问题,煤炭既是能源的主要提供者,也是大气污染的主要污染源,其高效洁净利用不容忽视,煤炭液化技术是解决此矛盾的有效途径之一。对煤液化的发展历程、开发和应用现状以及发展趋势和产业化前景进行了概括,详细介绍了煤直接液化、间接液化和煤与废塑料共液化技术的特性、影响因素及其关键问题,并提出了煤液化技术在我国今后发展的一些看法和建议。     

Solid-state NMR study of N labelled polyaniline upon reaction with DPPH

The quantitative investigation of the radical scavenging properties of polyaniline (PANI) upon reaction with excess of the stable DPPH radical (a 4:1 ratio of DPPH to aniline units in the polymer) was carried out using ¹⁵N and ¹³C solid state NMR spectroscopy. During the process the polyaniline was oxidised so that the imine content increased from 45 to 65%. The extent of oxidation measured by NMR was confirmed by N1s XPS analysis. However, within a 30 min reaction time, about 85% of the DPPH radicals were scavenged as monitored by the decay in its EPR signal. This is about 20 times greater than the fraction of DPPH required to oxidize PANI from an imine content of 45-65%. An identification of further redox processes is required to explain the high degree of radical scavenging. At the same time, there was no evidence of significant chemical binding or trapping of DPPH in the PANI structure.     

碳铵化肥发青问题解决小结

探讨了该厂化肥生产中碳铵发青的原因,通过硫化氢含量的测定,分析了系统内外影响因素,提出了解决措施,达到了不停车稳定产品质量的目的。     

Web挖掘技术及其在网络教学评价中的应用

结合W eb日志挖掘技术和数据立方体技术应用于网络教学评价体系,以网络教学体系的W eb服务端和客户端的日志作为数据源,使用数据挖掘技术采集有用的数据进行分析抽取,建立数据库,再应用数据立方体技术、OLAP进行分析处理,得到所需的评价结果。结果表明,此算法可以客观的评价网络教学结果。     

Premodification of Pt/γAl2O3 with Cinchonidine for the Enantioselective Hydrogenation of Ethyl Pyruvate: Effect of Premodification Conditions on Reaction Rate and Enantioselection

The premodification of a 5 wt% Pt/-Al₂O₃ catalyst with cinchonidine (0.01 and 0.2 g g^-1 _catalyst) is described and discussed. Premodification is carried out by treating the catalyst with a solution of cinchonidine followed by solvent removal. Catalysts premodified in this way give the same ee and initial rate of reaction for the enantioselective hydrogenation of ethyl pyruvate as those using the standard in situ modification procedure. Investigations of different solvents for premodification and reaction (dichloromethane, ethanol) show that it is the solvent used for the reaction that controls the observed enantioselection. Premodified catalysts also display the initial transient behavior typically observed with in situ modified catalysts in which the ee increases with conversion in the early part of the reaction. Premodified catalysts show an enhanced rate of reaction when ethanol is used as the reaction solvent compared with in situ modified catalysts under the same conditions. Premodification using aerobic conditions gives the best results and premodified catalysts can be stored prior to use for up to a week without loss of catalytic performance.     

抗震冷却塔金属淋水填料研究

冷却塔的冷却效果主要由淋水填料的冷却数和冷却塔的有效高度决定,淋水填料的换热性能决定了冷却塔的主要换热效果。为提高抗震冷却塔的抗震效果,淋水填料采用金属填料。通过在某工程中抗震冷却塔金属填料与普通塑料填料应用的对比分析,研究金属填料的特点及适用性,为抗震冷却塔的设计提供依据。     

银杏内酯A和B的分离纯化研究

In this paper a simple preparative method for isolation and purification of ginkgolides A and B was developed,As starting material,a commercially available standardized ginkgo extract (EGb761,containing 24% flavonoid and 6% terpene trilactones) was used,After a pretreatment step,optimized by the uniform design method ,the concentrated intermediate extract with high content of GA and gb( 90%) was separated into the individual terpenes by preparative liquid chromatography eluted with petroleum ether-ethylacetate,Analysis of products was carried out by means of HPLC-ELSD(evaporative light -scattering detector),The results show that ginkgolides A and B are obtained in higher yield and better purity.     

集中输漆及调漆系统在汽车涂装中的应用

为了适应现代汽车涂装大流水生产线喷漆的需要,保证汽车涂装质量、节省工时、节约成本,就需要采用先进的集中输漆及调漆系统;论述了在汽车涂装时集中输漆及调漆系统的优点、设计应考虑的因素、组成及输漆循环管路所用材料的选择、管路安装应遵循的原则与调试方法。