Effect of surface modification of metal hydride electrode on performance of MH/Ni batteries

A novel method was applied to the surface modification of the metal hydride(MH)electrode of MH/Ni batteries.Both sides of the electrode were plated with a thin silver film about 0.1μm thick using vacuum evaporation plating technology,and the effect of the electrode on the performance of MH/Ni batteries was examined.It is found that the surface modification can enhance the electrode conductivity and decrease the battery ohimic resistance.After surface modification,the discharge capacity at 5C(7.5A)is increased by 212 mA.h and the discharge voltage is increased by 0.11 V,the resistance of the batteries is also decreased by 32%.The batteries with modified electrode exhibit satisfactory durability.The remaining capacity of the modified batteries is 89%of the initial capacity even after 500 cycles.The inner pressure of the batteries during overcharging is lowered and the charging efficiency of the batteries is improved.     

混凝土尿素池的腐蚀及防腐蚀措施

本文对混凝土尿素池的腐蚀原因、规律及影响因素进行了阐述，提出了混凝土尿素池的腐蚀及防腐蚀措施，延长了设备的寿命，保证了尿素生产的正常运转。     

Metallographic sample prepared by ion beam etching

Ion beam etching technique was used to reveal the metallograhpic microstructure and interface morphology of electroplating chromium coating, in particular, whose substrate surface layer was treated in advance by laser quenching. Chemical etchings were also conducted for comparison. The reveal microstructures were observed and analyzed by scanning electron microscopy. The results show that ion beam etching can reveal well the whole microstructures of composite coating-substrate materials.     

Phase transformation behavior in Al-Zn-Cu alloys by hammering

The 5Cu40Zn55Al and 15Cu20Zn65Al alloys were prepared in the AI-Zn-Cu system, There exist the metastable phases ε and θ in the two alloys after homogenization treatment and furnace cooling, respectively. It is shown that the particles are refined from 3 mm to less than 10 μm after hammering the two alloys but there are still metastable phases. This means that the phase constituents of the two alloys have no changes by the deformation, which is different from that by balling. The phase constituents are not changed at room temperature by hammering, which is dependent on the deformation mechanism of hammering.     

高线精轧机平衡缸漏油分析及改进

分析了广州钢铁企业集团公司高线厂精轧机平衡油缸漏油的危害和原因，指出了这种油缸在设计上存在的缺陷，并提出了改进措施，改进后漏油问题得到了解决。     

系统的几种表示方法的探讨与分析

针对“信号与系统分析”、“数字信号处理”课程中对系统的描述与分析过于零散,导致学生学习时不好理解这一现象,分析并归纳了描述系统的数学模型、框图、冲激响应、系统函数及系统频率响应五种方法的基本原理及相应的表达式,并给出了系统的几种表示方法之间的转化关系,对于促进学生在学习过程中对于系统的理解和掌握十分有益.     

基于Kendallτ的赋权法在水环境评价中的应用

在进行多指标评价时,某些指标之间具有一定的相关性,将Copula理论中的和谐性指标Kendall τ计算方法进行改进,引入到赋权过程中,得到基于Kendallτ相关系数的赋权法.该方法适合于多样本多指标的评价体系,将关联性最强的指标赋予最大的权重,并将这种方法与模糊工程集理论相结合,评价了某地下水水质,结果显示该方法比较有效.     

基于提高频繁项集挖掘效率算法在市场分析中的探讨

频繁模式是频繁地出现在数据集中的模式(如项集、子序列或子结构)。如频繁地同时出现在交易数据集中的商品的集合是频繁项集,利用高效率的频繁项集挖掘算法来发现频繁项集,通过分析这些频繁项集来预测商品的销售情况。