Separation of squalene from palm fatty acid distillate using adsorption chromatography

A method to separate squalene from palm fatty acid distillate (PFAD) using neutralization‐hydrolysis‐neutralization before employing adsorption column chromatography was developed. Extraneous matters, especially free fatty acids (83.8%) and acylglycerols (12.7%), were first neutralized and removed before being subjected to hydrolysis by using commercially available, immobilized Candida antartica lipase, at 65 °C for 8 h. Neutralization followed by hydrolysis and repeated neutralization successfully concentrated squalene from an initial amount of 3.76% to 27.5%. Oil extracted from neutralized‐hydrolyzed‐neutralized PFAD was then passed through a Diaion HP‐20 column using reverse‐phase adsorption chromatography. Squalene was desorbed by hexane, with a recovery of 93%.     

Waste from brewing (trub) as a source of protein for the food industry

The use of agro-industrial waste for food enrichment can be limited, due to taste, odour, colour and other unpleasant characteristics. Trub (brewing waste) has important nutrients, such as proteins and carbohydrates, and phytochemical compounds; however, its applications are hindered by the astringent flavour. In order to reduce the bitterness of trub, aqueous extractions were realized at high temperature (100 °C per 1 h) in five steps. Two fractions were obtained; a liquid fraction (containing bitter compounds) and a solid fraction (the trub after the extraction process; TAP). Both fractions and the trub before the extraction process (TBP) were evaluated. The bitterness of TBP was significantly reduced in TAP while the protein content increased; TAP presented a branched network and changes in its structure. The reduction in bitterness and the high protein content allows the use of trub in the food industry.     

Case Characterization,Clinical Features and Risk Factors in Drug-Induced Liver Injury

Idiosyncratic drug-induced liver injury (DILI) caused by xenobiotics (drugs, herbals and dietary supplements) presents with a range of both phenotypes and severity, from acute hepatitis indistinguishable of viral hepatitis to autoimmune syndromes, steatosis or rare chronic vascular syndromes, and from asymptomatic liver test abnormalities to acute liver failure. DILI pathogenesis is complex, depending on the interaction of drug physicochemical properties and host factors. The awareness of risk factors for DILI is arising from the analysis of large databases of DILI cases included in Registries and Consortia networks around the world. These networks are also enabling in-depth phenotyping with the identification of predictors for severe outcome, including acute liver failure and mortality/liver transplantation. Genome wide association studies taking advantage of these large cohorts have identified several alleles from the major histocompatibility complex system indicating a fundamental role of the adaptive immune system in DILI pathogenesis. Correct case definition and characterization is crucial for appropriate phenotyping, which in turn will strengthen sample collection for genotypic and future biomarkers studies.     

Production of sulfonated polyetheretherketone/polypropylene fibers for photoactive textiles

New photocatalytic fibers made of sulfonated polyetheretherketone (SPEEK)/polypropylene (PP) are melt compounded and melt spun, first on laboratory scale and then on a semi‐industrial scale. Fiber spinnability is optimized and the fibers are characterized using mechanical testing, electron paramagnetic resonance (EPR) spectroscopy, and scanning electron microscopy (SEM). According to the results, the fiber spinnability remains at a good level up to 10 wt % SPEEK concentration. Optimal processing temperature is 200°C due to the thermal degradation at higher temperatures. EPR measurements show good and long‐lasting photoactivity after the initial irradiation but also decay in the radical intensity during several irradiation cycles. Mechanical tenacity of the SPEEK/PP 5:95 fiber is approximately 20% lower than for otherwise similar PP fiber. The fiber is a potential alternative to compete against TiO2‐based products but more research needs to be done to verify the real‐life performance. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42595.     

Filtration Performance Against Nanoparticles by Electrospun Nylon-6 Media Containing Ultrathin Nanofibers

We investigate the formation of ultrathin nanofibers (UNFs) with diameters below 20 nm by electrospinning Nylon-6 solution with various processing parameters. It is found that the UNF density and morphology are highly dependent on the solution concentration and age, collecting distance, and ambient humidity. The sequence that ribbon-like fibers are stretched by the electric force, followed by rapid phase separation of the splitting film is proposed as a formation mechanism of the UNFs. Based on the morphological study, a model of hexagonal nets is developed in order to estimate the filtration efficiency by the UNF structure. The estimated efficiency due to the UNFs is then combined with the contribution from the un-split nanofibers (NFs) to compute the total filtration efficiency and pressure drop for each of the electrospun media by applying a layered multiple zone model. The filtration performance of the electrospun media against nanoparticles is evaluated using the quality factor and specific filtration performance index, weighed against the pressure drop and basis weight of the media, respectively. Our results show UNFs are advantageous when high filtration efficiency is required and low weight is desired and/or little space is available for the filter media.

Copyright 2014 American Association for Aerosol Research     

Tracking individual kinesin motors in living cells using single quantum-dot imaging

We report a simple method using semiconductor quantum dots (QDs) to track the motion of intracellular proteins with a high sensitivity. We characterized the in vivo motion of individual QD-tagged kinesin motors in living HeLa cells. Single-molecule measurements provided important parameters of the motor, such as its velocity and processivity, as well as an estimate of the force necessary to carry a QD. Our measurements demonstrate the importance of single-molecule experiments in the investigation of intracellular transport as well as the potential of single quantum-dot imaging for the study of important processes such as cellular trafficking, cell polarization, and division.     

An Overview on Dietary Polyphenols and Their Biopharmaceutical Classification System (BCS)

Polyphenols are natural organic compounds produced by plants, acting as antioxidants by reacting with ROS. These compounds are widely consumed in daily diet and many studies report several benefits to human health thanks to their bioavailability in humans. However, the digestion process of phenolic compounds is still not completely clear. Moreover, bioavailability is dependent on the metabolic phase of these compounds. The LogP value can be managed as a simplified measure of the lipophilicity of a substance ingested within the human body, which affects resultant absorption. The biopharmaceutical classification system (BCS), a method used to classify drugs intended for gastrointestinal absorption, correlates the solubility and permeability of the drug with both the rate and extent of oral absorption. BCS may be helpful to measure the bioactive constituents of foods, such as polyphenols, in order to understand their nutraceutical potential. There are many literature studies that focus on permeability, absorption, and bioavailability of polyphenols and their resultant metabolic byproducts, but there is still confusion about their respective LogP values and BCS classification. This review will provide an overview of the information regarding 10 dietarypolyphenols (ferulic acid, chlorogenic acid, rutin, quercetin, apigenin, cirsimaritin, daidzein, resveratrol, ellagic acid, and curcumin) and their association with the BCS classification.     

Ballet balance strategies

Animating physically realistic human characters is challenging, since human observers are highly tuned to recognize human cues such as emotion and gender from motion patterns. The main contribution of this paper is a new model firmly based on biomechanics, which is used to animate balance and basic movements of a ballet dancers. It is supported by computer simulated experiments and it is in good agreement with biomechanical measurements of real-life dancers. Our results questions the previous approaches in dynamic animation, which only uses the center of gravity strategy, and instead demonstrate the viability of the center of pressure strategy.