DG抗高温隔离液在古深1井的应用

古深1井是大庆油田在古龙地区的一口风险探井,设计井深5 500 m,实际完钻井深为4 739 m。钻进过程中,多次出现塌、漏、卡等事故,造成井径不规则。为平衡压力,压稳地层,更好地隔离钻井液和水泥浆,提高顶替效率,设计采用DG抗高温隔离液。DG抗高温隔离液抗高温可达150℃,密度调节范围宽,抗高温悬浮稳定性好,失水量少,与水泥浆和钻井液相容性好。古深1井采用双级注水泥工艺,固井施工过程十分顺利,隔离液密度均匀,泵送容易,无发泡现象。从声幅测井情况来看,水泥面上部与隔离液交界处界面清楚,水泥环胶结良好,水泥返高达到了设计要求,混浆过渡段短,固井质量合格。     

皖河闸安全复核分析评价

本文针对皖河闸工程在运行中暴露出来的问题,以定性和定量相结合的方法综合分析皖河闸工程安全状况,并确定该闸安全类别,为工程改建提供依据。     

The forward muon detector of the DELPHI experiment at LEP

The layout and construction of the muon drift chambers equipping the end caps of the DELPHI detector are described. The performance of this forward muon detection system, determined from cosmic ray tests and data collected during the first year of LEP operation, is presented.     

Ziegler-Natta烯烃聚合催化剂进展

综述了Ziegler-Natta催化剂在乙烯聚合和丙烯聚合方面的研究开发现状，重点介绍了采用新型二醚化合物作为内给电子体的丙烯聚合催化剂的进展。随着合成树脂向功能化方向发展，开发综合性能优越的新型催化剂及给电子体将是今后的研究方向。     

无线局域网采用的补偿码键控调制方式

采用补偿码健控（CCK）可以使IEEE802．11b无线局域网系统实现多速率通信，这是补偿码第一次用于调制。介绍了无线局域网的直接序列扩频（DSSS）的各种模式，着重介绍了无线局域网所采用的CCK调制方式，并对CCK调制的性能进行了理论上的分析。     

Fine-line conductor manufacturing using drop-on demand PZT printingtechnology

An emerging selective metallization process to fabricate fine-line conductors based on drop-on-demand (DOD) ink jet printing and novel nano-particle fluid suspensions (NPFS) was studied. The suspensions consist of 1-10 nm silver or gold particulates that are homogeneously suspended in an organic carrier. A piezo-electric droplet generator driven by a bipolar voltage signal is used to dispense 50-70 μm diameter droplets traveling at 1-3 m/s before impacting a compliant polyimide substrate. The deposit/substrate composite is subsequently processed at 300°C for 15 min to allow for complete evaporation of the carrier and for sintering of the nano-particles, thereby yielding a finished circuit interconnect. Test vehicles created using this technique exhibit features as fine as 120 μm wide and 1 μm thick with resistivities on the order of 3.5×10^-5 Ωcm. The circuitry performed well under environmental conditioning. As expected, repeatability of circuitry fabrication showed sensitivity to the generation of steady, satellite-free droplets. In an effort to generate droplets consistently, it is essential to develop a strong fundamental understanding of the correlation between device excitation parameters and dispensed fluid properties, and to resolve the microrheological behavior of the NPFS when flowing through the droplet generator     

发电机用DJL350磁极钢板的开发与应用

本文论述了高强度冷轧磁极板的试制性研究，应用性研究及在开生桥机组上的实施。通过与国外材料的对比，研究了材料的化学成分、力学性能、磁性能、金相组织及其与性能的关系。并对其实际应用效果进行了分析总结。     

自编AutoLISP程序在绘制PFD/P&ID中的应用

通过业余学习,自编了一些AutoLISP小型应用程序,并在绘制PFD和P&ID中取得了良 好的应用效果。对此实践进行了研讨,以期获得可资借鉴之处。     

无线局域网中基于RC4的加密算法的分析与改进

分析RC4加密算法自身的缺陷和无线局域网WEP协议对RC4的误用,介绍了TKIP协议在安全性方面的改进。     

FH-5A 加氢精制催化剂的研制

为适应加工高硫馏分油的需要，研制成功了加氢精制催化剂FH－5A。该剂以含硅氧化铝为载体、Mo-Ni为活性组分，并添加少量助剂而制得。FH－5A工业放大催化剂在氢分压3．4MPa、空速2．5h^-1、反应温度350℃的加氢条件下在小型装置处理伊朗催化裂化柴油和沙特轻质直馏柴油的混合油（30：70），可将原料油中硫含量由9000μg/g，氮含量由432μg/g降至47μg/g。评价试验表明，FH－5A加氢精制催化剂可满足中东高硫直馏柴油、二次加工柴油及其混合柴油加氢精制的需要。