Morphology and properties of poly(vinyl chloride)–polyurethane blends

The objective of this research was to study the morphology and properties of PVC–polyurethane blends. Studies on blends of a segmented polyether polyurethane with PVC were carried out utilizing differential scanning calorimetry, Rheovibron, stress–strain, infrared peak position studies, and infrared dichroism experiments. This thermodynamically incompatible system was made kinetically compatible by precipitation from tetrahydrofuran (THF) solutions. THF–dioxane solution casting and melt processing produced an incompatible system. The compatible polyurethane–PVC system contains a well-mixed PVC–polyether matrix phase as evidenced by T_g shifts, orientation characteristics, and infrared peak position changes. The aromatic urethane segments which exhibit microphase separation in the pure polyurethane are not solubilized by blending with PVC by any of sample preparation methods used in this study.     

Drag reduction characteristics of graft copolymers prepared by the gamma irradiation of poly(oxyethylene) in the presence of acrylic acid

Graft copolymers were prepared by irradiation of poly(oxyethylene), PEO, aqueous solutions in presence of acrylic acid. Chain transfer to PEO controls the graft length, the measured chain transfer constant of the acrylic acid radicals to PEO being 4.11 × 10^?4 at 25°C. The drag reduction characteristics of the graft copolymers were measured in the Reynolds number range 10⁴–10⁵ in a smooth-walled tube, 0.635 cm inside diameter. The drag reduction falls to near zero as the solution pH is lowered to 3, evidence of the formation of a PEO-poly(acrylic acid) coacervate.     

Reductive alkylation of illinois No. 6 coal. 1H and 13C n.m.r. spectra of the 13C-enriched alkylation products

The reductive alkylation of Illinois No. 6 coal has been carried out using potassium and naphthalene in tetrahydrofuran and methyl-¹³C and butyl-1 -¹³C iodides to alkylate the resultant polyanion. The soluble products of the reductive alkylation reaction were isolated by extraction and chromatography. Proton and carbon n.m.r. spectra were recorded. The intense resonance signal at δ3.95 which appears in the proton n.m.r. spectra of Illinois No. 6 coal butylated with unenriched butyl iodide is split into a doublet by the ¹³C nuclei. Similar results were obtained for the methylation products. The chemical shift and coupling interaction establish that aryl ethers are a very important constituent of the alkylated coal. The carbon n.m.r. spectra of the coal alkylated with ¹³C-enriched alkyl iodides are intense. The resonances of the C-alkylation products appear in a single broad band with a maximum intensity in spectral regions compatible with the formation of the reductive alkylation products of certain polynuclear aromatic hydrocarbons or the base-catalysed alkylation of certain benzylic carbon atoms. The resonances of the N -alkylation products appear in two distinct bands. These resonances are tentatively assigned to amines produced as a result of reductive alkylation of heterocyclic compounds. The resonances of the 0-alkylation products appear in three distinct bands which can be assigned to alkyl aryl ethers, alkyl aryl ethers with substituents at the adjacent positions, and to alkyl carboxylates. The ratio of ethers to carboxylates in the soluble alkylation products was determined to be 7.8 for butylation and 8.0 for methylation. The Chromatographic fractions contain different amounts of C-, N-, and 0-alkylation products. This finding suggests that the coal structure is not highly uniform.     

Fuel properties and emissions of soybean oil esters as diesel fuel

The effects of using blends of methyl and isopropyl esters of soybean oil with No. 2 diesel fuel were studied at several steady-state operating conditions in a four-cylinder turbocharged diesel engine. Fuel blends that contained 20, 50, and 70% methyl soyate and 20 and 50% isopropyl soyate were tested. Fuel properties, such as cetane number, also were investigated. Both methyl and isopropyl esters provided significant reductions in particulate emissions compared with No. 2 diesel fuel. A blend of 50% methyl ester and 50% No. 2 diesel fuel provided a reduction of 37% in the carbon portion of the particulates and 25% in the total particulates. The 50% blend of isopropyl ester and 50% No. 2 diesel fuel gave a 55% reduction in carbon and a 28% reduction in total particulate emissions. Emissions of carbon monoxide and unburned hydrocarbons also were reduced significantly. Oxides of nitrogen increased by 12%.     

Response to walnut olfactory and visual cues by the parasitic wasp Diachasmimorpha juglandis

Diachasmimorpha juglandis is a specialist parasitoid attacking fly larvae in the genus Rhagoletis that feed exclusively on walnut fruit husks. In a free-foraging assay comparing response to uninfested, infested, and mechanically damaged fruits, we first determined that D. juglandis use host feeding damage on the fruit as a cue for host presence. In another free-foraging assay that used artificial walnut models and wind tunnel experiments, D. juglandis distinguished infested from uninfested fruits by using either olfactory or visual cues separately. However, the response rate of wasps in the wind tunnel was raised considerably when visual cues were also available. We analyzed the volatile compounds emitted by cohorts of uninfested, mechanically damaged, and infested fruits 1, 3, 5, 8, and 10 days after oviposition by flies into the infested fruits. Total volatile emissions did not differ significantly among treatments, but quantitative changes in volatiles distinguished infested fruits from uninfested and damaged fruits. The fact that parasitoids did not distinguish between infested and damaged fruits in assays where damage was visible indicates that they rely on visual cues when those are available.     

Intercalation and exfoliation of clay nanoplatelets in epoxy‐based nanocomposites: TEM and XRD observations

Diglycidyl ether of bisphenol A (DGEBA) and diglycidyl ether of bisphenol F (DGEBF) reinforced with organo‐montmorillonite clay nanoplatelets were investigated using anhydride‐ and amine‐curing agents. The sonication technique was used to process epoxy/clay nanocomposites. The basal spacing of clay nanoplatelets was observed by wide‐angle X‐ray scattering (WAXS), small‐angle X‐ray scattering (SAXS) techniques, and transmission electron microscopy. It was found that the basal spacing of clay nanoplatelets in epoxy matrix was expanded after mixing with either DGEBA/DGEBF or methyltetrahydrophthalic‐anhydride (MTHPA) curing agent. The sonication technique provided larger d‐spacing of clay nanoplatelets. Because of the different curing temperatures, MTHPA‐cured epoxy/clay nanocomposites produced more expanded d‐spacing of clay nanoplatelets modified with methyl, tallow, bis(2‐hydroxyethyl) quaternary ammonium (MT2EtOH) than triethylenetetramine‐cured nanocomposites. Depending on the selection of curing agent and organic modification for clay nanoplatelets, the d‐spacing was expanded to be up to 8.72 nm. POLYM. ENG. SCI., 46:452–463, 2006. © 2006 Society of Plastics Engineers     

Isolation and characterization of ganglioside 9-O-acetyl-GD3 from bovine buttermilk

Bovine buttermilk contains a unique ganglioside, 9-O-acetyl-GD₃. In order to isolate large quantities of this ganglioside, a simplified isolation scheme which consists of several ion-exchange and silica gel column chromatographic procedures was devised. The isolated 9-O-acetyl-GD₃ was characterized on the basis of its thin-layer chromatographic behavior, its immunoreactivity with a specific monoclonal antibody, JONES, and by conversion to authentic GD₃ by mild base treatment.     

Electrophilic Aromatic Functionalization of Phenolic Photoresist Polymers

Summary Functionalization of both linear poly(4-hydroxystyrene) (PHS) and branched poly(4-hydroxystyrene) (PHS-B) was accomplished via a Reimer-Tiemann electrophilic aromatic substitution reaction. Linear and branched poly(4-hydroxystyrene-co-5-vinylsalicylaldehyde) (pHS/5VSA and pHS-B/5VSA) copolymers were observed to undergo acid-catalyzed, novolac type self-crosslinking. Both the pHS/5VSA and pHS-B/5VSA copolymer systems possessed a lower deep ultra violet microlithographic sensitivity compared to linear PHS when formulated in negative photoresists. The sluggishness of the negative photoresists containing 5-vinylsalicylaldehyde functionalized copolymers was attributed to a combination of resonance stabilization and steric hindrance effects.     

Processing and physical properties of native grass-reinforced biocomposites

Big blue stem grass fiber-reinforced high density polyethylene powder biocomposites were fabricated using two separate processing schemes: (1) by compounding biofiber with the thermoplastic powder in an extruder and subsequently injection molding the extrusion pellets and (2) by combining biofiber and the powder thermoplastic powder using a modified sheet molding compounding (SMC) line and subsequently compression molding the sheet material. The physical properties including storage modulus, heat deflection temperature (HDT), notched Izod impact strength, and morphology were evaluated with dynamic mechanical analysis, Izod impact strength measurement, and microscopy observation. It was found that compression-molded specimens achieved similar modulus values to injection molded specimens for grass-reinforced high density polyethylene (HDPE) composites. The stiffness of the compression-molded specimens is related to the consolidation state of the samples, which depends on compression molding conditions such as temperature, pressure, and mold type. Compression-molded specimens exhibited a higher HDT and notched Izod impact strength compared to injection-molded samples. Grass fiber-reinforced cellulose acetate butyrate (CAB) biocomposites made with SMC processing had similar physical properties with grass fiber-reinforced HDPE composites, which indicates that natural fiber-reinforced CAB biocomposites have the potential to replace polyolefin-based composites for automotive applications. POLYM. ENG. SCI. 47:969–976, 2007. © 2007 Society of Plastics Engineers.     

Efficiency of mineral admixtures in mortars: Quantification of the physical and chemical effects of fine admixtures in relation with compressive strength

This work is the fourth part of an overall project the aim of which was the development of general mix design rules for concrete containing different kinds of mineral admixtures. The two first parts presented the separation and quantification, by means of an empirical model based on semi-adiabatic calorimetry measurements, of the different physical effects responsible for changes in cement hydration (short terms) when chemically inert quartz powders were used in mortars. Part three dealt with an intensive experimental program, presenting and commenting more than 2000 compressive strength measurements. This program concerned 1 day to 6 months old mortars containing up to 75% of inert and pozzolanic admixtures. All these compressive strength results are analyzed in this fourth part and the influence of three effects, namely dilution, heterogeneous nucleation and the pozzolanic effect, are discriminated and quantitatively evaluated. An efficiency concept is proposed in order to take into account the effect of mineral admixture in mortars from both the physical and chemical points of view. It uses an efficiency function ξ(p) that has notable properties: it is independent of time, independent of fineness and independent of the type of mineral admixture.