Environmentally Friendly Determination of Quality Parameters of Biodiesel/Diesel Blends Using Fourier Transform Infrared Spectra

Multivariate calibration models based on data from mid‐infrared spectroscopy of biodiesel/diesel blends were obtained. The blends were prepared from diesel oil and esters of soybean oil, waste cooking oil, and hydrogenated vegetable oil in proportions ranging from 0 to 100 % biodiesel. The results showed that the multivariate regression models with interval partial least squares (iPLS), backward interval partial least squares (biPLS), and synergy interval partial least squares (siPLS) were able to determine the fractions of the infrared spectrum that contain the relevant information for estimating the values of physicochemical properties, flash point, specific gravity, and cetane number, which are used in quality control of the blends. In the best models, the values of determination coefficients were greater than 0.9500, proving their efficiency as an alternative to traditional analytical methods.     

Hydrogen Production by the Thermophilic Bacterium Thermotoga neapolitana

As the only fuel that is not chemically bound to carbon, hydrogen has gained interest as an energy carrier to face the current environmental issues of greenhouse gas emissions and to substitute the depleting non-renewable reserves. In the last years, there has been a significant increase in the number of publications about the bacterium Thermotoga neapolitana that is responsible for production yields of H₂ that are among the highest achievements reported in the literature. Here we present an extensive overview of the most recent studies on this hyperthermophilic bacterium together with a critical discussion of the potential of fermentative production by this bacterium. The review article is organized into sections focused on biochemical, microbiological and technical issues, including the effect of substrate, reactor type, gas sparging, temperature, pH, hydraulic retention time and organic loading parameters on rate and yield of gas production.     

Bioactive Phytochemicals from Wild Arbutus unedo L. Berries from Different Locations in Portugal: Quantification of Lipophilic Components

The lipophilic composition of wild Arbutus unedo L. berries, collected from six locations in Penacova (center of Portugal), as well as some general chemical parameters, namely total soluble solids, pH, titratable acidity, total phenolic content and antioxidant activity was studied in detail to better understand its potential as a source of bioactive compounds. The chemical composition of the lipophilic extracts, focused on the fatty acids, triterpenoids, sterols, long chain aliphatic alcohols and tocopherols, was investigated by gas chromatography–mass spectrometry (GC–MS) analysis of the dichloromethane extracts. The lipophilic extractives of the ripe A. unedo berries ranged from 0.72% to 1.66% (w/w of dry weight), and consisted mainly of triterpenoids, fatty acids and sterols. Minor amounts of long chain aliphatic alcohols and tocopherols were also identified. Forty-one compounds were identified and among these, ursolic acid, lupeol, α-amyrin, linoleic and α-linolenic acids, and β-sitosterol were highlighted as the major components. To the best of our knowledge the current research study provides the most detailed phytochemical repository for the lipophilic composition of A. unedo, and offers valuable information for future valuation and exploitation of these berries.     

Study of the effect of the monomer pressure on the copolymerization of ethylene with 1-hexene

The effect of ethylene pressure on the copolymerization of ethylene with 1-hexene was studied. The results show an increasing of productivities (g of polymer/n_Zr h) with pressure. This tendency was not observed for the activity (g of polymer/n_Zr h bar) that decreases when pressure is raised. When varing the pressure, the characteristics and properties of the formed copolymers are in accordance with the expectation for changes in the monomer concentration; increasing the pressure causes a decrease in comonomer incorporation. At higher ethylene pressure, the polymer is more crystalline due to less incorporation of 1-hexene and the molecular weight is higher. The density of the copolymers also decreases with comonomer incorporation into the copolymer © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 2567–2574, 1997     

Isolation and Characterization of Microsatellite Markers for Passiflora contracta

Passiflora contracta Vitta (Passifloraceae) is an endemic species of the Atlantic Rainforest, one of the most species-rich ecoregions in the world, although extremely endangered. We have developed an enriched microsatellite library in order to fine-scale studies of the genetic structure of P. contracta. Twelve pairs of microsatellite primers were designed, and seven loci were successfully amplified and characterized by genotyping two wild populations of P. contracta. All seven loci were polymorphic, with an average number of alleles found being 4.8 and 5 per population. The cross-species transferability was tested using sister species Passiflora ovalis Vell. Ex Roemer. The development of these markers will contribute to the studies of population genetics in P. contracta as well as future studies concerning diversity patterns in the Atlantic Rainforest, and may also help to establish strategies for the conservation of this species.     

Accelerated aging of elastomeric composites with vulcanized ground scraps

The aim of this work is to study the effect of thermal aging on the mechanical, dynamic‐mechanical, and chemical properties of SBR (styrene‐butadiene rubber) composites filled with SBR industrial rubber scraps. Eight composites with varying proportions (10–80 phr) of the SBR ground scraps (SBR‐r) were prepared and subjected to accelerated aging in an air‐oven. The composites were evaluated, and the results were compared with a control sample (base formulation with 0 phr of SBR‐r), before and after thermal aging. The accelerated aging led to a decrease in the mechanical properties as a result of an increase in the stiffness of the material, related to an increase in the crosslink density. However, these properties were not affected by the addition of rubber scraps up to 50 phr, either before or after aging. The increase in the glass transition temperature of the composites after aging, measured using dynamic mechanical analysis, confirmed the occurrence of a postcrosslinking process. Fourier transform infrared spectroscopy and crosslink density revealed that the aging mechanism was dependent on the SBR‐r content. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Defensive Compounds and Male-Produced Sex Pheromone of the Stink Bug, Agroecus griseus

Agroecus griseus is a serious corn pest in Brazil. Contents of the dorsal abdominal glands (DAGs) in nymphs, and the metathoracic gland (MTG) in adults of this species were characterized and quantified. Compounds found were similar to those of other Pentatomidae species and included aliphatic hydrocarbons, aldehydes, oxo-alkenals, and esters. However, two compounds were found in the MTG that have not been described previously for this family. Mass spectrometry, infrared spectroscopy, and gas chromatographic analysis using coinjection with authentic standards confirmed the identities of the compounds as enantiopure (S)-2-methylbutyl acetate and 3-methyl-2-butenyl acetate. The five nymphal instars showed significantly different ratios of components, mainly between those of the first and later instars. No significant differences were detected in MTG contents between sexes. Gas chromatography (GC) analysis of aeration extracts of males and females showed the presence of a compound released exclusively by males. Gas chromatography – electroantennographic detection (GC-EAD) assays indicated that the male-specific compound is bioactive in females, suggesting the presence of an attractant pheromone. The mass spectrum and infrared data for this compound matched with methyl 2,6,10-trimethyltridecanoate, a sex pheromone component previously detected in the stink bugs, Euschistus heros and E. obscurus. The synthetic standard coeluted with the natural pheromone on two different GC stationary phases, confirming the proposed structure. Y-tube olfactometer assays showed that the synthetic standard was strongly attractive to females, and GC-EAD tests produced responses with antennae from females similar to those of the natural pheromone.     

Effects of ozonized water and heat treatment on the papaya fruit epidermis

This study examined the effects of O₃ and hot water treatments on the epidermis of Golden papaya fruit. Heat treatments were applied in a hot water brushing (HWB) system. Papayas were brushed under a pressurized hot water rinse stage at 45, 55 and 65 °C for 60 s. In the HWB treatment, 4 ppm ozone was applied to the papayas for 1 or 2 min. The results show that ozone applications did not affect the fruit's cuticular surface, while heat treatments allowed natural fissures on the fruit epidermis to recover. Several crystalloid forms were identified on the epidermis of the papayas after the heat treatments. The predominant crystalloid forms on papayas are tubular and there is a positive response to temperature; the higher the temperature, the larger and more frequent the tubular crystalloids.     

Active nano-CuPt3 electrocatalyst supported on graphene for enhancing reactions at the cathode in all-vanadium redox flow batteries

Graphene-supported monometallic (Pt) and bimetallic (CuPt₃) cubic nanocatalysts have been investigated as new positive electrode materials for improving the VO₂⁺/VO²⁺ redox process occurring in the vanadium redox flow batteries (VRB). High-resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM) have been employed to characterize the electrodes. The presence of the CuPt₃ nanocubes on graphene conferred higher electrocatalytic activity due to the much higher electroactive area compared to that obtained with the Pt nanoparticles. The electrochemical surface area of the nano-(CuPt₃)-decorated graphene electrode was 105% higher compared to non-decorated graphene, being then a promising alternative for improving the VRB.     

Production,Characterization and Synthetic Application of a Purine Nucleoside Phosphorylase from Aeromonas hydrophila

Purine nucleoside phosphorylase (PNP) from Aeromonas hydrophila encoded by the deoD gene has been over‐expressed in Escherichia coli, purified, characterized about its substrate specificity and used for the preparative synthesis of some 6‐substituted purine‐9‐ribosides. Substrate specificity towards natural nucleosides showed that this PNP catalyzes the phosphorolysis of both 6‐oxo‐ and 6‐aminopurine (deoxy)ribonucleosides. A library of nucleoside analogues was synthesized and then submitted to enzymatic phosphorolysis as well. This assay revealed that 1‐, 2‐, 6‐ and 7‐modified nucleosides are accepted as substrates, whereas 8‐substituted nucleosides are not. A few transglycosylation reactions were carried out using 7‐methylguanosine iodide ( 4 ) as a D ‐ribose donor and 6‐substituted purines as acceptor. In particular, following this approach, 2‐amino‐6‐chloropurine‐9‐riboside ( 2c ), 6‐methoxypurine‐9‐riboside ( 2d ) and 2‐amino‐6‐(methylthio)purine‐9‐riboside ( 2g ) were synthesized in very high yield and purity.