Bio-based sustainable films from the Algerian Opuntia ficus-indica cladodes powder: Effect of plasticizer content

The present study investigated the fabrication and characterization of bio-based sustainable films composed of a terrestrial plant raw material, namely Opuntia ficus-indica (OFI) cladodes powder (CP) and a marine seaweed derivative, namely agar (A). The effect of glycerol concentration on the properties of the casted films was evaluated at four different contents, namely 30, 40, 50 and 60 wt%. The films present UV-blocking properties, as well as moderate mechanical performance, thermal stability, and water vapor transmission rate (WVTR). The results point to an increase in thickness, elongation at break, moisture content, water solubility, and WVTR with increasing glycerol content. On the contrary, Young's modulus, tensile strength, and water contact angle decreased as glycerol concentration increased. The best combination is obtained for the film with 30% glycerol, based on an intermediate compromise between physical, mechanical, thermal, and barrier properties. All these outcomes express the potentiality of the powder obtained from grinding the OFI cladodes as raw material to produce low-cost films for the development of sustainable packaging materials.     

Synthesis and characterization of eugenol-based silicone modified waterborne polyurethane with excellent properties

A eugenol-based silicone-containing monomer 4,4′-(1,1,3,3-tetramethyldisiloxane-1,3-dipropyl)bis-2-methoxyphenol(EUSi) was synthesized from eugenol and 1,1,3,3-tetramethyldisiloxane via the hydrosilylation reaction. And waterborne polyurethane (WPU) with excellent properties was obtained by using EUSi as a type of diol chain extender. The unique combination of rigidity and flexibility in the chemical structure of EUSi greatly facilitated the mechanical properties, thermal properties, and water resistance of WPU. With only a 3% dosage of EUSi, the maximum tensile strength was increased from 6.2 to 22.4 MPa, while the water absorption was decreased from 31.3% to a surprisingly 7.6%. Our work provides a new convenient strategy for the preparation of organosilicon-modified WPU with improved performance.     

Bi-layer gelatin active films with “Pitanga” leaf hydroethanolic extract and/or natamycin in the second layer

Research on biopolymers-based active films produced with natural antioxidants and/or antimicrobials has gained attention over the last few years; however, anti-mold activity has been less studied than those of anti-bacteria. The aim of this work was the development and characterization of bi-layer films based on gelatin with natamycin and/or “Pitanga” leaf hydroethanolic extract in the second thin layer in order to determine the effects of these bioactive compounds on bi-layered film properties. The films were characterized regarding their moisture content and solubility in water, optical properties, microstructure, mechanical and thermal properties, water contact angle, water vapor permeability, UV/visible light transmission, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and antioxidant and anti-mold activities. Active films presented activity against Penicillium spp and Aspergillus niger and demonstrated antioxidant activity, as measured by ABTS ^•+ and DPPH ^• methods. Neither additive used in the films' second layer significantly affected the films' moisture content, thermal properties or the molecular interactions of the polymer matrix, assessed by FTIR, although some mechanical properties were affected, and the water contact angle. In conclusion, bi-layer films have reduced the quantity of additives required to maintain the antioxidant and anti-mold activities, as compared to similar monolayer films of the same thickness.     

The role of the Tm3+ concentration on CaMoO4 properties processed by microwave hydrothermal under stirring condition

The compounds based on calcium molybdate (CaMoO₄) are the subject of extensive research due to their excellent optical properties and a broad range of potential technological applications. In this work, we report a systematic study of CaMoO₄:Tm³⁺ phosphors synthesized by coprecipitation and processed in a microwave-hydrothermal system at low temperature (100°C) and stirring. The effect of the Tm³⁺ doping content (0%–12%) is studied in full detail to understand their role in the CaMoO₄:Tm³⁺ morphological, structural, and luminescent properties. The X-ray diffraction, Raman, and Fourier Transform Infrared spectroscopic techniques revealed that all the prepared powders have a tetragonal crystal structure with a distinct density of cation vacancies and structural disorders. The band gap remains almost constant for doping levels lower than 8%, but it narrows strongly for powders doped with 12% Tm³⁺ ions. The designed phosphors have shown two emission bands in which intensity depends on the Tm³⁺ ions doping level. For doping levels lower than 2%, the photoluminescence profile displays a broad emission band peaking at 543 nm (green). For concentrations higher than 4%, the band centered at 543 nm decreases in intensity and the near-infrared emission band at around 800 nm, assigned to ³F₃, ³H₄ → ³H₆ transitions from Tm³⁺ ion, become more intense. The outcomes of this work reveal that appropriated Tm³⁺ ions doping levels can be applied to suppress the PL emission in the visible range and improve that in the near-infrared region in CaMoO₄-based materials.     

Extraction and characterization of hydroxyapatite-based materials from grey triggerfish skin and black scabbardfish bones

The conversion of food industry by-products to compounds with high added value is nowadays a significant topic, for social, environmental, and economic reasons. In this paper, calcium phosphate-based materials were obtained from black scabbardfish (Aphanopus carbo) bones and grey triggerfish (Balistes capriscus) skin, which are two of the most abundant fish by-products of Madeira Island. Different calcination temperatures between 400 and 1000°C were employed. Materials obtained from calcination of bones of black scabbard fish were composed by homogeneous mixtures of hydroxyapatite (Ca₁₀(PO4)₆(OH)₂, HAp) and β-tricalcium phosphate (β-Ca₃(PO₄)₂, β-TCP). Because of the high biocompatibility of HAp and the good resorbability of β-TCP, these natural biphasic materials could be very relevant in the field of biomaterials, as bone grafts. The ratio between HAp and β-TCP in the biphasic compound was dependent on the calcination temperature. Differently, the material obtained from skin of grey triggerfish contained HAp as the main phase, together with small amounts of other mineral phases, such as halite and rhenanite, which are known to enhance osteogenesis when used as bone substitutes. In both cases, the increase of calcination temperature led to an increase in the particles size with a consequent decrease in their specific surface area. These results demonstrate that from the fish by-products of the most consumed fishes in Madeira Island it is possible to obtain bioceramic materials with tunable composition and particle morphology, which could be promising materials for the biomedical field.     

Anticancer Activity of Two Novel Hydroxylated Biphenyl Compounds toward Malignant Melanoma Cells

Melanoma, the deadliest form of skin cancer, is still one of the most difficult cancers to treat despite recent advances in targeted and immune therapies. About 50% of advanced melanoma do not benefit of such therapies, and novel treatments are requested. Curcumin and its analogs have shown good anticancer properties and are being considered for use in combination with or sequence to recent therapies to improve patient outcomes. Our group previously published the synthesis and anticancer activity characterization of a novel curcumin-related compound against melanoma and neuroblastoma cells (D6). Here, two hydroxylated biphenyl compounds—namely, compounds 11 and 12—were selected among a small collection of previously screened C2-symmetric hydroxylated biphenyls structurally related to D6 and curcumin, showing the best antitumor potentiality against melanoma cells (IC₅₀ values of 1.7 ± 0.5 μM for 11 and 2.0 ± 0.7 μM for 12) and no toxicity of normal fibroblasts up to 32 µM. Their antiproliferative activity was deeply characterized on five melanoma cell lines by performing dose-response and clonal growth inhibition assays, which revealed long-lasting and irreversible effects for both compounds. Apoptosis induction was ascertained by the annexin V and TUNEL assays, whereas Western blotting showed caspase activation and PARP cleavage. A cell cycle analysis, following cell treatments with either compound 11 or 12, highlighted an arrest in the G2/M transition. Taking all this evidence together, 11 and 12 were shown to be good candidates as lead compounds to develop new anticancer drugs against malignant melanoma.     

Engineering of Janus-Like Dendrimers with Peptides Derived from Glycoproteins of Herpes Simplex Virus Type 1: Toward a Versatile and Novel Antiviral Platform

Novel antiviral nanotherapeutics, which may inactivate the virus and block it from entering host cells, represent an important challenge to face viral global health emergencies around the world. Using a combination of bioorthogonal copper-catalyzed 1,3-dipolar alkyne/azide cycloaddition (CuAAC) and photoinitiated thiol–ene coupling, monofunctional and bifunctional peptidodendrimer conjugates were obtained. The conjugates are biocompatible and demonstrate no toxicity to cells at biologically relevant concentrations. Furthermore, the orthogonal addition of multiple copies of two different antiviral peptides on the surface of a single dendrimer allowed the resulting bioconjugates to inhibit Herpes simplex virus type 1 at both the early and the late stages of the infection process. The presented work builds on further improving this attractive design to obtain a new class of therapeutics.     

Thermodynamic analysis of fatty acid esterification for fatty acid alkyl esters production

The development of renewable energy source alternatives has become a planet need because of the unavoidable fossil fuel scarcity and for that reason biodiesel production has attracted growing interest over the last decade. The reaction yield for obtaining fatty acid alkyl esters varies significantly according to the operating conditions such as temperature and the feed reactants ratio and thus investigation of the thermodynamics involved in such reactional systems may afford important knowledge on the effects of process variables on biodiesel production. The present work reports a thermodynamic analysis of fatty acid esterification reaction at low pressure. For this purpose, Gibbs free energy minimization was employed with UNIFAC and modified Wilson thermodynamic models through a nonlinear programming model implementation. The methodology employed is shown to reproduce the most relevant investigations involving experimental studies and thermodynamic analysis.     

A survey of the current photovoltaic equipment industry in Brazil

The use of renewable alternative sources of energy in the world has been growing in the last few decades due to concerns about dependence on fossil sources and to environmental reasons, related to climatic change and its effects on mankind. Tax and/or financial incentives have been instituted for the population, to have access to renewable source technologies, and for the local equipment industry, to develop more quickly. In Brazil, the PV (photovoltaic) equipment to convert solar into electricity is more often used in low income rural communities, located distant from the grid network, for rural electrification, water pumping and public illumination. However, since there is no currently specific regulatory incentive mechanism for this source in the country, the Brazilian PV equipment industry has not made great advances and the market is largely dominated by multinationals. Against this background, a survey of the current PV equipment industry in Brazil is extremely relevant, especially in the event of a national program development to promote the use of this technology, stimulate the domestic industry and reduce the dependence on imported equipment.     

Solar photocatalytic degradation of real textile effluents by associated titanium dioxide and hydrogen peroxide

The present work investigated the photodegradation of real textile effluents by advanced oxidative process (AOP) using TiO₂/H₂O₂/sunlight system. The procedures were carried out at ambient conditions in March 2005. The results were evaluated by COD reduction concomitant to the increase in inorganic ion concentration (mineralization) and the analysis of the effluent characteristic spectral wavelengths: 228, 254, and 284 nm (simple aromatic compounds), 310 nm (conjugated aromatic compounds), and 390, 450, and 530 (color). As this study is not restricted to the decolorization process, it allows a more reliable evaluation of effluent mineralization. The results indicate that solar radiation is as efficient as or even more efficient than artificial radiation was in previous studies and that it also allows a reduction in effluent treatment operational costs.