Shielding calculations for a 100 MeV 30 mA proton beam

The Study and Production of Exotic Species (SPES) project employs a 100 MeV, 30 mA proton beam that strikes a primary target. The resulting high-energy neutron flux impinges on a secondary target of depleted uranium to produce, through fission, beams of short-lived, neutron-rich nuclei. This paper deals with some of the preliminary shielding calculations for the bunker. Monte Carlo is employed with MCNPX and, because of the deep penetrations involved, the in-house variance reduction optimiser, the direct statistical approach. The calculations exhibited a number of typical features that are addressed and discussed.     

A 3D Magnetic Hyaluronic Acid Hydrogel for Magnetomechanical Neuromodulation of Primary Dorsal Root Ganglion Neurons

Neuromodulation tools are useful to decipher and modulate neural circuitries implicated in functions and diseases. Existing electrical and chemical tools cannot offer specific neural modulation while optogenetics has limitations for deep tissue interfaces, which might be overcome by miniaturized optoelectronic devices in the future. Here, a 3D magnetic hyaluronic hydrogel is described that offers noninvasive neuromodulation via magnetomechanical stimulation of primary dorsal root ganglion (DRG) neurons. The hydrogel shares similar biochemical and biophysical properties as the extracellular matrix of spinal cord, facilitating healthy growth of functional neurites and expression of excitatory and inhibitory ion channels. By testing with different neurotoxins, and micropillar substrate deflections with electrophysical recordings, it is found that acute magnetomechanical stimulation induces calcium influx in DRG neurons primarily via endogenous, mechanosensitive TRPV4 and PIEZO2 channels. Next, capitalizing on the receptor adaptation characteristic of DRG neurons, chronic magnetomechanical stimulation is performed and found that it reduces the expression of PIEZO2 channels, which can be useful for modulating pain where mechanosensitive channels are typically overexpressed. A general strategy is thus offered for neuroscientists and material scientists to fabricate 3D magnetic biomaterials tailored to different types of excitable cells for remote magnetomechanical modulation.     

Scaling Laws of Vortex Reconnections

The vortex reconnection rate f plays an important role in the dynamics of a tangle of quantised vortices in superfluid turbulence. The question which we address is how f depends on the vortex line density L. In the case of a homogeneous isotropic tangle of vortices we show that, besides the known regime which scales as f ～ L^5/2, another regime exists which scales as f ～ L². In the case of a polarised vortex confguration, we argue that the scaling law changes and show numerical evidence for it. Finally we construct an idealised model of turbulence decay based on vortex reconnections and discuss its implications. PACS numbers: 67.40.Vs, 67.57.Fg.     

Microwave-assisted photochemical reactor for the online oxidative decomposition and determination of p-hydroxymercurybenzoate and its thiolic complexes by cold vapor generation atomic fluorescence detection

We developed a photochemical method for the online oxidation of p-hydroxymercurybenzoate (PHMB), an organic mercury species widely used for mercaptan and thiolic compound labeling. The method is based on a fully integrated online UV/microwave (MW) photochemical reactor for the digestion of PHMB, followed by cold vapor generation atomic fluorescence spectrometry (CVG-AFS) detection. The MW/UV process led to the quantitative conversion of PHMB and thiol-PHMB complexes to Hg(II), with a yield between 91% and 98%, without using chemical oxidizing reagents and avoiding the use of toxic carcinogenic compounds. This reaction was followed by the reduction of Hg(II) to Hg(0), performed in a knitted reaction coil with NaBH(4) solution, and AFS detection in an Ar/H(2) miniaturized flame. The low MW power applied (18 W) allowed us to keep constant the temperature of the photochemical reactor (21 ± 1 °C), using a flowing water bath. This avoided peak widening due to diffusion processes generally occurring at high temperatures and in the additional cooling coil. This method has been applied to the determination of thiols in human plasma, blood, and wine.     

Fatigue behaviour of concrete bridge deck slabs reinforced with GFRP bars

GFRP bars are often used for the internal reinforcement of concrete bridge deck slabs as an alternative to traditional steel reinforcements with excellent results in terms of corrosion resistance. Several experiments on bridge decks were conducted to evaluate their structural behaviour but their fatigue performance still needs an adequate experimental investigation. This paper presents the results of an experimental campaign on four full scale concrete bridge deck specimens reinforced with GFRP bars that were designed, constructed and tested to resist cyclic moving loads. Two hydraulic jacks were used to simulate moving concentrated loads. After the cycles, the load was increased to the static failure. The slabs reinforced with GFRP bars showed a better fatigue performance compared to the requests of the European codes.     

Experimental study and modelling of Cr (VI) removal from wastewater using Lemna minor

The removal of Cr(VI) from wastewater by Lemna minor was studied both at laboratory and pilot scale. Laboratory tests were conducted under different conditions of initial Cr(VI) concentration (0.5 and 2.0 mg/l) and temperature (285 and 291 K). Batch experiments were carried out during 16 days in which the chromium concentrations, both in the biomass and in wastewater were measured. Data were used to characterize the biouptake capacity of the biomass; results showed that it increases with the temperature and when the initial Cr concentration decreases. The biouptake process could be fitted by an equation, with a correlation coefficient of 0.98. The removal process was assessed using the data of the variation of chromium concentration in the wastewater with respect to time; this allowed obtaining constant parameters which were applied in a mathematical model for the assessment of duckweed systems in a pilot scale plant.     

Assessment of intradialysis calcium mass balance by a single pool variable‐volume calcium kinetic model

Introduction: A reliable method of intradialysis calcium mass balance quantification is far from been established. We herein investigated the use of a single‐pool variable‐volume Calcium kinetic model to assess calcium mass balance in chronic and stable dialysis patients. Methods: Thirty‐four patients on thrice‐weekly HD were studied during 240 dialysis sessions. All patients were dialyzed with a nominal total calcium concentration of 1.50 mmol/L. The main assumption of the model is that the calcium distribution volume is equal to the extracellular volume during dialysis. This hypothesis is assumed valid if measured and predicted end dialysis plasma water ionized calcium concentrations are equal. A difference between predicted and measured end‐dialysis ionized plasma water calcium concentration is a deviation on our main hypothesis, meaning that a substantial amount of calcium is exchanged between the extracellular volume and a nonmodeled compartment. Findings: The difference between predicted and measured values was 0.02 mmol/L (range ?0.08:0.16 mmol/L). With a mean ionized dialysate calcium concentration of 1.25 mmol/L, calcium mass balance was on average negative (mean ± SD ?0.84 ± 1.33 mmol, range ?5.42:2.75). Predialysis ionized plasma water concentration and total ultrafiltrate were the most important predictors of calcium mass balance. A significant mobilization of calcium from the extracellular pool to a nonmodeled pool was calculated in a group of patients. Discussion: The proposed single pool variable‐volume Calcium kinetic model is adequate for prediction and quantification of intradialysis calcium mass balance, it can evaluate the eventual calcium transfer outside the extracellular pool in clinical practice.     

Oxidation,ignition, and combustion of Al·I2 composite powders

Materials combining high energy density of metals with the biocidal activity of halogens are of interest for applications aiming to inactivate harmful aerosolized microorganisms by combined thermal and chemical effects. This effort develops nanocomposite Al-halogen materials to replace pure Al as a fuel additive in energetic formulations. Cryogenic milling of elemental aluminum and iodine is used to prepare powder-like composite materials for laboratory tests. In such materials, iodine is stabilized in aluminum matrix and is released when the materials are heated and ignited. Al·I₂ composite powders with the iodine concentration from 10 to 30 wt.% were prepared. Iodine release by and oxidation of such materials were investigated using thermo-gravimetric analysis. Ignition temperatures of the prepared powders were determined at the heating rates of 1000–22,000 K/s using an electrically heated filament. Composite powders ignite at lower temperatures compared to pure Al powders. Combustion characteristics of the prepared materials were investigated using a constant volume explosion test for aerosolized powders and laser ignition test for individual particles. In both combustion experiments pure Al served as a reference. Higher combustion rate and greater total pressure were observed for the aerosolized clouds of composite powders with 15 and 20 wt.% of iodine. For individual particles, the burn times were slightly longer and flame temperatures were slightly lower compared to those of pure aluminum. Both overall iodine concentration and its stability in the composite powders affected their ignition and combustion characteristics.     

Study on silicon surface oxidation of post-implant resist cleaning

Minimum substrate loss is required for resist strip of high dose, ultra shallow junction implant for source/drain extensions. Silicon surface oxidation of downstream plasma resist strip results in silicon recess of the source/drain extension regions. This paper reports the study of silicon surface oxidation for different resist strip plasma chemistries and the effect of plasma strip process parameters such as power, pressure and temperature on silicon surface oxidation. A good agreement was found between optical ellipsometry, XPS (X-ray photoelectron spectroscopy) and TEM (transmission electron spectroscopy) for thickness measurement of very thin (<20 Å) oxide grown on silicon surface due to plasma exposure. Selectivity of crust breakthrough and resist removal over silicon oxidation was also discussed in this paper along with dopant loss.