Microbiological,physical and chemical characteristics of freshwater prawns (Macrobrachium rosenbergii) in modified‐atmosphere packaging

This study evaluated the influence of packaging atmosphere (air versus 50% N₂/50% CO₂) on microbiological (mesophiles, psychrotrophs), physical (gas measurement) and chemical (pH, total volatile basic nitrogen [TVB‐N], NH₃, H₂S and biogenic amines) parameters in freshwater prawns during storage at 0 ± 1 °C for 240 h. To select the most appropriate packaging, 21 batches of each treatment were analysed. Both the packaging permeability and the combination of gases affected the shelf life, but the modified‐atmosphere packaging (MAP) was more efficient than air packaging, increasing the shelf life by 40 h. The parameters of pH and TVB‐N showed no statistical difference between the two atmosphere conditions all along the storage period. The biogenic amine agmatine showed potential for use as a quality indicator due to the increased concentration during storage. In further studies, this amine can be applied as an indicator for public health issue.     

Dynamic monitoring of the shelf life of Cobia (Rachycentron canadum): a study on the applicability of a smart photochromic indicator

To ensure the marketing of fresh fish‐based products, it is necessary to develop fast methods that assess its freshness in real time. This study therefore evaluated the applicability of a photochromic time–temperature indicator (TTI) to monitor the time and temperature history during the period of validity of the whole fish of the cobia specimen stored in ice. The TTI response was both visibly interpreted as well as adaptable to measurement using suitable equipment. The results showed that the smart indicator activated during 6 s of ultraviolet light showed a similar rate of deterioration of the analysed product visual response, proving to be a dynamic shelf life indicator that can assure consumers the ultimate quality point of the entire cobia easily, cheaply and accurately.     

On the stability of the V5B6-phase

The currently assessed V–B phase diagram indicates a peritectoid formation at 1727 °C (V₃B₄+VBV₅B₆) for the V₅B₆ boride. The observation of this phase in several as-cast V–B alloys has lead us to a systematic evaluation of its stability, specially its possible formation from the liquid. In this work, V–B alloys (52–56 at.% B range) were produced through arc melting and heat-treated under high vacuum at 2000 °C for 2 h. The materials in both as-cast and heat-treated conditions were characterized through scanning electron microscopy (SEM) (backscattered electron (BSE) images) and X-ray diffraction (XRD). The features observed in the as-cast samples allowed us to conclude that this phase should be formed from the liquid through the L+V₃B₄V₅B₆ peritectic reaction. In spite of not reaching equilibrium condition during heat-treating, the results from the characterization of heat-treated samples have indicated the stability of the V₅B₆-phase at 2000 °C, in disagreement with the currently accepted V–B phase diagram.     

Analysis of the interfacial micromorphology of adhesive systems in cavities prepared with Er,Cr:YSGG, Er:YAG laser and bur

The purpose of this in vitro study was to evaluate the interaction pattern of adhesive systems on laser and bur cavities. Cavities were prepared according to the following groups (n=9): (G1) conventional diamond bur (No. 1013); (G2) Er:YAG laser (250 mJ, 4 Hz, 80.6 J/cm2); (G3) Er,Cr:YSGG laser (3.5 W, 20 Hz, 61.7 J/cm2). After cavity preparation, specimens were divided into three subgroups differing the adhesive systems used (n=3): (GA) AdheSE; (GB) Clearfil standard error (SE) Bond; (GC) Single Bond. After insertion of a micro-hybrid composite resin, the specimens were sectioned across the bonded surface dividing the teeth into two halves, which were prepared for SEM analysis. Cavities prepared with laser appeared to be more irregular than the bur cavities. Different patterns of gap formation and resin tags could be observed, showing the differences, advantages, and disadvantages of both types of cavities. Under the settings of the present study, resin tags were more pronounced in lased dentin than bur prepared dentin independently of the bonding systems used. On the other hand gap formation between dentin and resin in laser prepared cavities was observed suggesting collagen alteration.     

Surface treatment of glass fiber and carbon fiber posts: SEM characterization

Morphology, etching patterns, surface modification, and characterization of 2 different fiber posts: Gfp, Glass fiber post; and Cfp, carbon fiber were investigated by SEM analysis, after different surface treatments. Thirty fiber posts, being 15 Gfp and 15 Cfp were divided into a 5 surface treatments (n = 3): C-alcohol 70% (control); HF 4%-immersion in 4% hydrofluoric acid for 1min; H(3) PO(4) 37%-immersion in 37% phosphoric acid for 30s; H(2) O(2) 10%-immersion in 10% hydrogen peroxide for 20 min; H(2) O(2) 24%-immersion in 24% hydrogen peroxide for 10 min. Morphology, etching patterns, surface modification and surface characterization were acessed by SEM analysis. SEM evaluation revealed that the post surface morphology was modified following all treatment when compared with a control group, for both type of reinforced posts. HF seems to penetrate around the fibers of Gfp and promoted surface alterations. The Cfp surface seems to be inert to treatment with HF 4%. Dissolution of epoxy resin and exposure of the superficial fiber was observed in both post groups, regardless the type of reinforcing fiber, H(2) O(2) in both concentrations. Relative smooth surface area was produced by H(3) PO(4) 37% treatment, but with similar features to untreated group. Surface treatment of fiber post is a determinant factor on micromechanical entanglement to resin composite core. Post treatment with hydrogen peroxide resulted strength of carbon and glass/epoxy resin fiber posts to resin composite core.     

Effects of tip-sample forces and humidity on the imaging of DNA with a scanning force microscope

We have investigated the effects of tip-sample forces and relative humidity when using a scanning force microscope (SFM) to image DNA molecules adsorbed on fresh mica. As the force between the tip and the sample increases, the apparent height of the DNA molecules decreases. After being imaged with high forces, the DNA molecules recover partially in their apparent height, indicating that a plastic deformation of the DNA has been induced by the scanning tip. At low humidities, DNA molecules can be imaged with a force up to 150 nN during the scanning without obvious damages. At higher humidities, however, the DNA molecules can be dissected or swept away by the tip even at a tip-sample force of 30 nN. The net force between the tip and the molecules is the vector sum of several forces, the dominant components of which are the elastic force due to the cantilever bending and the capillary force resulting from the water meniscus formed between the tip and the sample surface. When the relative humidity of the imaging environment is increased, the capillary force becomes stronger.     

Interfaces in MoSi2-SiC In Situ composites synthesized by melt processing

Interfaces between the primary β-SiC and the surrounding MoSi₂ matrix in melt-synthesized in situ composites have been investigated, with emphasis on the chemistry and crystallographic relationships developed during solidification. Primary SiC growth occurs with {002} and {111} facets, both of which are found to template the subsequent nucleation and epitaxial growth of the MoSi₂ matrix. Eight independent orientation relationships (ORs) were identified, involving the following combinations of planes: $$\begin{gathered} \left\{ {002} \right\}_{Sic} \parallel \left( {001} \right)_{MoSi_2 } \left( {3 rotational variants} \right), or \{ 101)_{MoSi_2 } \hfill \\ \left\{ {111} \right\}_{Sic} \parallel (001)_{MoSi_2 } , or \{ 100)_{MoSi_2 } \left( {2 rotational variants} \right),or \{ 101)_{MoSi_2 } \hfill \\ \end{gathered} $$ The interfacial relationships were rationalized using coincident site lattice arguments as well as energetic simulations based on the Grey-Bohr algorithm. The latter analysis suggests that the multiplicity of relationships arises from local effects associated with the size and shape of the adsorbate layers preceding the formation of the MoSi₂ nuclei. An amorphous carbon layer, 2- to 5-nm thick, was detected at all interfaces and some of the matrix grain boundaries. This interphase is believed to evolve by solid-state precipitation of C during postsolidification cooling and is, in principle, metastable. The C interphase enables easy debonding and thus may have important implications for the mechanical performance of materials involving SiC/MoSi₂ constituents.