A simple Raman technique to measure the degree of cure in UV curable coatings

The curing behavior of four UV curable clearcoats was examined using spectra from a confocal Raman microscope. The disappearance of the C=C line near 1636 cm⁻¹ provides the signature for the curing of the samples, but quantification of the degree of cure by standard peak-fitting and baseline subtraction methods does not work well because of sample fluorescence, baseline shifts and overlapping peaks. A smoothed second-derivative processing approach overcomes all of these difficulties and provides a simple, fast and objective quantification procedure. Steep cure gradients through the thickness of the clearcoat, due to screening of the bottom of the clearcoat by both the UVA and photoinitiator, were observed. Cure gradients at the top of the clearcoat due to oxygen inhibition were also observed. The most complete cure throughout the film thickness was obtained with a mixture of standard and red-shifted photoinitiators.     

An improved accelerated weathering protocol to anticipate Florida exposure behavior of coatings

A new accelerated weathering protocol has been developed which closely replicates the performance of automotive and aerospace coating systems exposed in South Florida. IR spectroscopy was used to verify that the chemical composition changes that occurred during accelerated weathering in devices with a glass filter that produced a high fidelity reproduction of sunlight’s UV spectrum matched those that occurred during natural weathering. Gravimetric water absorption measurements were used to tune the volume of water absorption during accelerated weathering to match that which occurred during natural weathering in South Florida. The frequency of water exposure was then scaled to the appropriate UV dose. A variety of coating systems were used to verify the correlation between the physical failures observed in the accelerated weathering protocol and natural weathering in South Florida. The new accelerated weathering protocol correctly reproduced gloss loss, delamination, cracking, blistering, and good performance in a variety of diverse coating systems. For automotive basecoat/clearcoat paint systems, the new weathering protocol shows significant acceleration over both Florida and previous accelerated weathering tests. For monocoat aerospace systems, the new weathering protocol showed less acceleration than for automotive coatings, but was still an improvement over previous accelerated tests and was faster than Florida exposure.     

Long-term weathering behavior of UV-curable clearcoats: Depth profiling of photooxidation,UVA, and HALS distributions

The long-term weathering performance of two UV-curable clearcoat systems was studied using in-plane microtomy in combination with infrared spectroscopy, UV spectroscopy, and ESR spectroscopy. Oxygen transport characteristics were also studied using the half-time method. The photooxidation versus depth profile was highly dependant on the presence of hindered amine light stabilizers (HALS) for both coating systems. Ultraviolet light absorbers (UVA) had little effect on the photooxidation profile. A photooxidation gradient was formed in both clearcoats due to a reduction in oxygen solubility when compared to standard thermoset clearcoats. This gradient was only seen in formulations not containing HALS. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, on October 27–29, 2004, in Chicago, IL.     

Dreissenid mussels from the Great Lakes contain elevated thiaminase activity

We examined thiaminase activity in dreissenid mussels collected at different depths and seasons, and from various locations in Lakes Michigan, Ontario, and Huron. Here we present evidence that two dreissenid mussel species (Dreissena bugensis and D. polymorpha) contain thiaminase activity that is 5–100 fold greater than observed in Great Lakes fishes. Thiaminase activity in zebra mussels ranged from 10,600 to 47,900 pmol g^− 1·min^− 1 and activities in quagga mussels ranged from 19,500 to 223,800 pmol g^− 1·min^− 1. Activity in the mussels was greatest in spring, less in summer, and least in fall. Additionally, we observed greater thiaminase activity in dreissenid mussels collected at shallow depths compared to mussels collected at deeper depths. Dreissenids constitute a significant and previously unknown pool of thiaminase in the Great Lakes food web compared to other known sources of this thiamine (vitamin B₁)-degrading enzyme. Thiaminase in forage fish of the Great Lakes has been causally linked to thiamine deficiency in salmonines. We currently do not know whether linkages exist between thiaminase activities observed in dreissenids and the thiaminase activities in higher trophic levels of the Great Lakes food web. However, the extreme thiaminase activities observed in dreissenids from the Great Lakes may represent a serious unanticipated negative effect of these exotic species on Great Lakes ecosystems.     

Catalyst-Free Direct Vapor-Phase Growth of Hexagonal ZnO Nanowires on <Emphasis>α</Emphasis>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

The evolution of ZnO nanowires has been studied under supersaturation of Zn metal species with and without a ZnO thin-film buffer layer on α-Al₂O₃ deposited by the pulsed laser ablation technique. The nanowires had diameters in the range of 30 nm to 50 nm and lengths in the range of 5 μm to 10 μm with clear hexagonal shape and [000[`1]] [000\bar{1}] , [10[`1]1] [10\bar{1}1] , and [10[`1]0] [10\bar{1}0] facets. X-ray diffraction (XRD) measurements indicated crystalline properties for the ZnO nanostructures grown on pulsed laser deposition (PLD) ZnO nucleation layers. The optical properties were analyzed by photoluminescence (PL) and cathodoluminescence (CL) measurements. The ZnO nanowires were found to emit strong ultraviolet (UV) light at 386 nm and weak green emission as observed by PL measurements. The stoichiometry of Zn and O was found to be close to 1 by x-ray photoelectron spectroscopy (XPS) measurements. The process-dependent growth properties of ZnO nanostructures can be harnessed for future development of nanoelectronic components including optically pumped lasers, optical modulators, detectors, electron emitters, and gas sensors.     

An Objective Method to Prioritize Socio‐Environmental Water Management Tradeoffs Using Multi‐Criteria Decision Analysis

Rivers provide many social and environmental services that benefit humanity. A critical role of water mangers is to prioritize water allocation options that trade off socio‐economic and hydro‐ecological benefits in rivers. Methods for multi‐criteria decision analysis (MCDA) provide a structured and systematic manner for researchers to aid in this process. In this paper, we describe a new MCDA method that prioritizes large multi‐dimensional sets of tradeoffs to support well‐informed water management in rivers. The method was developed based on an environmental flows planning study in the Goulburn‐Broken River catchment, Victoria, Australia. A combined simulation and heuristic optimization procedure was previously integrated into a hydrological catchment network model. That process resulted in a large set of viable daily water allocation schedules that traded off long‐term irrigation and hydro‐ecological benefits at the catchment outlet. We provided new guidance procedures to identify priority tradeoffs that can be used in stakeholder deliberations and catchment decision‐making. Our MCDA method included combined multi‐dimensional ordination and cluster analysis to spread the water allocation alternatives onto a two‐dimensional plane to discover alternatives with similar criteria tradeoffs. A geometric distance‐based method was performed on the full set of alternatives and on the identified clusters to rank the alternatives in accordance with minimizing the distance of the alternatives to an ideal but non‐feasible reference point in multi‐dimensional space. This method complements the use of elicitation procedures when water manager or other stakeholder interaction is not an option or when objectivity is desired. Copyright © 2016 John Wiley & Sons, Ltd.     

Controlling Home and Office Appliances with Smart Phones

Most home and office appliances contain microprocessors. All these appliances have some user interface, but many users become frustrated with their appliances' difficult, complex functions. However, a new framework, the personal universal controller (PUC), lets users interact with appliances through a separate user interface device that they carry. Smart phones are good candidates for providing interfaces because they're common, their communication capabilities connect users to appliances, and they're already being used for a wide range of applications. The framework includes an abstract specification language for describing appliances, a two-way communication protocol, and automatic interface generation software that customizes user interfaces. This article overviews the PUC system and describes in detail the design and implementation of automatic interface generation for Microsoft's Smartphone platform.     

A 1-Megapixel, progressive-scan image sensor with antibloomingcontrol and lag-free operation

A 1024-pixel×1024-pixel interline charge-coupled device (IL CCD) image sensor has been developed. It incorporates antiblooming and electronic exposure control while eliminating lag and obtaining a high responsivity. The novel features of this device include a noninterlaced, or progressive-scan, architecture and dual-horizontal registers that can be used to clock out the image area by one or two lines at a time. These features make it well suited for applications demanding high-resolution-image capture from a single, high-speed scan. The progressive-scan architecture of this device covers the same resolution in an electronic-camera application as that of a 2-million-element, interlaced device     

Estimating frequency-response function using periodic signals and the f.f.t.

A technique for estimating a frequency-response function using a periodic pseudorandom binary sequence which is compatible with the fast-Fourier-transform algorithm is presented. A method of synchronising the p.r.b.s. and the sampling for the f.f.t. using a single clock source and two binary counters is described. A simple check on the synchronisations and the identification of an 8th-order lowpass Butterworth filter is provided.