A Distributed Energy-Aware Routing Protocol for Underwater Wireless Sensor Networks

The design of routing protocols for Underwater Wireless Sensor Networks (UWSNs) poses many challenges due to the intrinsic properties of underwater environments. In this paper we present DUCS (Distributed Underwater Clustering Scheme), a new GPS-free routing protocol that does not use flooding techniques, minimizes the proactive routing message exchange and uses data aggregation to eliminate redundant information. Besides, DUCS assumes random node mobility and compensates the high propagation delays of the underwater medium using a continually adjusted timing advance combined with guard time values to minimize data loss. The theoretical and simulation studies carried out demonstrate its effectiveness.     

Mixed Messages about Mixed Tenure: Do Reviews Tell the Real Story?

Mixed tenure is the predominant development and regeneration strategy and is a key component of UK housing and urban policy. It is purported to provide wide-ranging social, environmental and economic benefits to residents. While there is a large literature on mixed tenure, policy makers are likely to rely on reviews and summaries of the evidence rather than primary studies. But can they rely on such reviews? Using systematic review methods this paper critically appraises recent reviews for the evidence that mixed tenure policies and strategies have achieved any of these expected benefits. Of the six UK reviews of primary studies, most drew on less than half the available primary studies, none provided a critical appraisal of individual studies and made no comment on conflicting evidence between and within studies. While the reviews gave indications of the deficiencies of the evidence base, rather than focus on the implications of these deficiencies, four of the six reviews emphasised the positive effects of tenure mix.     

Comparison of the Determination of Eight Cholesterol Oxides in Dry�CCured Shoulder by GC�CFID, GC�CMS, and GC Tandem Mass Spectrometry

The analysis of eight cholesterol oxidation products: 7α–hydroxycholesterol, 7β–hydroxycholesterol, α–epoxycholesterol, β–epoxycholesterol, 20α–hydroxycholesterol, cholestanetriol, 25–hydroxycholesterol, and 7–ketocholesterol in dry–cured shoulder was carried out. The extraction of lipids was performed by using the Bligh and Dyer method (1959). Interferences were removed by solid-phase extraction (SPE) in two steps with silica and aminipropylsilica SPE columns. The separation of the eight cholesterol oxidation products was done by gas chromatography, and the detection was performed by flame ionization detection (FID) and mass spectrometry (MS). The results obtained from the use of both systems of detection were compared. The results showed that gas chromatography-mass spectrometry (GC–MS) was the most suitable technique to obtain reliable quantitative data, and significant differences (p < 0.05) between FID and MS determining 7α–hydroxycholesterol, 20α–hydroxycholesterol, and 25–hydroxycholesterol were observed. For the determination of cholesterol oxidation products, it was necessary to apply gas chromatography-tandem mass spectrometry to increase the sensitivity and to avoid interference from other compounds.     

Highly Efficient Deep‐Blue Electrophosphorescent Pt(II) Compounds with Non‐Distorted Flat Geometry: Tetradentate versus Macrocyclic Chelate Ligands

A new class of deep blue electrophosphorescent Pt(II) emitters have been designed and synthesized. This new class of deep blue Pt(II) emitters employ tetradentate and macrocyclic chelate chromophores to constrain the Pt(II) molecules in a non‐distorted flat geometry in both the ground state and the excited state. The new deep blue emitters do not produce excimer emission, with emission quantum efficiency as high as 95% in 10% doped PMMA (poly(methyl methacrylate) films, and excellent UV stability, compared to the corresponding bidentate Pt(II) emitters. The macrocyclic tetradentate chelate Pt(II) compounds are the first examples of fully sterically constrained deep blue Pt(II) emitters that do not display structural distortion and have a higher thermal stability and a higher emission quantum efficiency than the corresponding non‐macrocyclic tetradentate Pt(II) analogues. A computational study supports that the macrocylic Pt(II) compounds are structurally more stable than the tetradentate Pt(II) molecules. Bright and efficient deep blue electrophosphorescent devices using a macrocyclic Pt(II) emitter have been successfully fabricated with a maximum brightness of 10 680 cd m^?2, maximum external quantum efficiency of 15.4% (at 490 cd m^?2), and Commission Internationale de L'Eclairage (1931) coordinates (x + y ) of less than or near 0.30, respectively.     

Elastomeric Fibrous Hybrid Scaffold Supports In Vitro and In Vivo Tissue Formation

Biomimetic materials with biomechanical properties resembling those of native tissues while providing an environment for cell growth and tissue formation, are vital for tissue engineering (TE). Mechanical anisotropy is an important property of native cardiovascular tissues and directly influences tissue function. This study reports fabrication of anisotropic cell‐seeded constructs while retaining control over the construct's architecture and distribution of cells. Newly synthesized poly‐4‐hydroxybutyrate (P4HB) is fabricated with a dry spinning technique to create anelastomeric fibrous scaffold that allows control of fiber diameter, porosity, and rate ofdegradation. To allow cell and tissue ingrowth, hybrid scaffolds with mesenchymalstem cells (MSCs) encapsulated in a photocrosslinkable hydrogel were developed. Culturing the cellularized scaffolds in a cyclic stretch/flexure bioreactor resulted in tissue formation and confirmed the scaffold's performance under mechanical stimulation. In vivo experiments showed that the hybrid scaffold is capable of withstanding physiological pressures when implanted as a patch in the pulmonary artery. Aligned tissue formation occurred on the scaffold luminal surface without macroscopic thrombus formation. This combination of a novel, anisotropic fibrous scaffold and a tunable native‐like hydrogel for cellular encapsulation promoted formation of 3D tissue and provides a biologically functional composite scaffold for soft‐tissue engineering applications.     

Picosecond photodiffraction in semiconductor multiquantum wells and microcavities

We study the transient gratings photogenerated in the picosecond regime in three families of structures, namely : - structures of thickness in the order of one micron, including quantum wells (GaAs/GaAlAs, CdTe/ CdZnTe). A transmission modulation due to the electric field has been observed. We show that, in accordance with our calculations, this modulation is screened faster than 10 ps at a fluence of a few µJ/cm2. - A structure including GalnAs/GalnAsP MQWS in a cavity. This structure shows a top diffraction efficiency of 2.5 × 10-² at 1.55 µm for an energy of excitation in the order of 100 µJ/cm2. The diffraction efficiency exhibits several oscillations due to Fabry-Pårot effects. By introducing cavity effects in our model, we show that the diffraction efficiency is amplified by more than a factor 2 with respect to the no-cavity case. Calculations show that the diffraction efficiency may reach 6 × 10-² around 1.625 µm, for a front mirror reflectivity of 90 %. - Structures including bulk GaAs microcavities. The risetime is lower or in the order of 1 ps while the diffraction efficiency attains 1 %, with an average power of 4 mW (i.e. an energy of 2 µJ/cm²/pulse), compatible with a commutation of packets at 80 MHz.     

A Coating that Combines Lotus‐Effect and Contact‐Active Antimicrobial Properties on Silicone

The antimicrobial equipment of materials is of great importance in medicine but also in daily life. A challenge is the antimicrobial modification of hydrophobic surfaces without increasing their low surface energy. This is particularly important for silicone‐based materials. Because most antimicrobial surface modifications render the materials more hydrophilic, methods are needed to achieve antimicrobial activity without changing the high water‐contact‐angle. This is achieved in the present work, where SiO₂ nanoparticles are prepared and functionalized with 3‐(trimethoxysilyl)‐propyldimethyloctadecyl ammonium chloride (QAS) in a one‐pot synthesis. The modified nanoparticles are applied onto a silicone surface from suspension with no need of elaborate pretreatment. The resulting surface exhibits a Lotus‐Effect combined with contact‐active antimicrobial properties. The particle surfaces show self‐organizing micro‐ and nanostructures that afford a water‐contact angle of 144° and a hysteresis below 10°. The particles are self‐adhering on the silicone after solvent evaporation and resistant against immersion into and washing with water for at least 5 d. Thereby, the adhesion of the bacterial strain Staphylococcus aureus to these surfaces is reduced and the remaining bacterial cells are killed within 16 h. This is the first example of a Lotus‐Effect surface with intrinsic contact‐active antimicrobial properties.     

The effect of field drying on the non-structural carbohydrate composition in vetch hay

Common vetch (Vicia sativa L) was harvested and allowed to dry in the open air. The composition of fresh forage in non-structural carbohydrates varied markedly between years, the contents of sugars and starch in both leaves and stems being much higher in 1990-91 than 1991-92. Field drying produced a significant decrease in the amounts of these carbohydrates. The total losses of sugars and starch in hay, expressed as losses of dry matter, ranged from 28 to 15 g kg^-1, depending on the year.     

Peptidase and proteinase activity ofLactococcus lactis, Lactobacillus casei andLactobacillus plantarum

The proteolytic system of several non-commercial strains of lactococci and lactobacilli that were isolated directly from traditional-Spanish, semi-hard, goats' milk cheese was studied. The aminopeptidase, X-prolyldipeptidyl aminopeptidase, dipeptidase and proteinase activity of these new strains was measured for the cytoplasmic, cell-wall/membrane and spontaneously released fractions. The aminopeptidase activity was exclusively intracellular and higher forLactobacillus casei subsp.casei than forLactococcus lactis subsp.lactis. Lactobacillus plantarum showed higher dipeptidase activity thanL. casei. The highest level of proteinase activity was recorded for the cell-wallmembrane fraction ofLactococcus lactis subsp.lactis IFPL 359, and was higher on -casein than on _s-casein for all the strains studied. These results suggest some different contribution of these strains to the proteolysis of cheese during ripening and they seem to complement each other when used together in the starter culture.

---

Peptidase- und Proteinase-Aktivität vonLactococcus lactis, Lactobacillus casei undLactobacillus plantarum

Zusammenfassung Das proteolytische System von mehreren nicht kommerziellenLactococcus- undLactobacillus-Stämmen wurde direkt vom traditionellen spanischen halbfesten Ziegenmilchkäse isoliert und untersucht. Die Aktivität von Aminopeptidase, X-Prolyldipeptidylaminopeptidase, Dipeptidase and Proteinase dieser neuen Stämme wurde in cytoplasmatischen, Zellwand-Membran- und spontan freigesetzten Fraktionen gemessen. Die Aminopeptidase-Aktivität erfolgte ausschließlich intracellular und war höher fürLactobacillus casei subsp. casei als fürLactococcus lactis subsp.lactis. Lactobacillus plantarum zeigte höhere Dipeptidase Aktivität alsL. casei. Die höchsten Werte für die Proteinase-Aktivität wurden für die Zellwand-Membran-Fraktion vonLactococcus lactis subsp.lactis IFPL359 gemessen. Für alle untersuchten Stämme war die Aktivität höher bei -Casein als bei _s-Casein. Dieses Ergebnis weist auf den unterschiedlichen Einfluß dieser Stämme bei der Proteolyse von Käse während der Reifung hin. Die Stämme scheinen sich gegenseitig zu ergänzen, wenn sie gemeinsam in Starterkulturen verwendet werden.