Vitamins A and E content in infant milk-based powdered formulae after opening the packet

Vitamins A and E were determined by HPLC in 20 starting, milk-based powdered infant formulae from local markets. We traced the evolution of these compounds, once the packets had been opened, during 0, 30 and 70 days of storage at room temperature (≈25 °C; min. 23 °C, max. 25.5 °C). Immediately after opening the packets, vitamin A ranged from 0.55 to 0.94 mg RE/100 g (93.3–183 μg RE/100 kcal) and vitamin E from 6.58 to 27.8 mg α-TE/100 g (1.36–5.39 mg α-TE/100 kcal). All the samples had higher vitamins A and E contents than those declared on the label, vitamin A mean adequacy values: 134% ± 17, min. 98%, max. 162%, and vitamin E 185% ± 47, min. 101%, max. 286%, including values at 0, 30 and 70 days of storage.     

Indentation Damage and Residual Stress Field in Alumina-Y2O3-Stabilized Zirconia Composites

Fracture features, residual stresses, and zirconia transformation are studied in indentation strength specimens of alumina-Y₂O₃-stabilized zirconia (3% mol of Y₂O₃, 3YTZP) ceramics in order to analyze the extension of the indentation damage in the bulk of the specimens. Two compositions, 5 vol% 3YTZP (A5) and 40 vol% 3YTZP (A40), have been prepared by stacking tape-casted tapes and sintering. After indentation with loads ranging from 50 to 300 N, samples were fractured in four-point bending and the fracture surfaces were characterized by scanning electron microscopy. Raman and piezospectroscopic techniques were used to determine the monoclinic zirconia fraction and the residual stresses through the fracture surfaces. In the A5 composition, the indentation damage morphology was clearly half-penny, whereas the A40 composition presented Palmqvist crack formation. Zirconia transformation was only observed in the plastically deformed zones underneath the imprints whereas there were significant residual compressive stresses outside the plastic zones due to the indentation damage. The intensity of this residual compressive field was dependent on the level of zirconia transformation due to indentation damage because zirconia transformation induced tensile stress fields superimposed on the compressive stresses.     

The effect of additives on the treatment of oil-in-water emulsions by vacuum evaporation

A simple batch vacuum evaporation process for the treatment of several oil-in-water (O/W) emulsions is reported. The experiments were carried out with waste emulsions from an industrial copper rolling process and with model emulsions prepared in the laboratory. No detailed information on the formulation of the industrial waste O/W emulsions was available. Several model emulsions were formulated using the same base oil (an 85–15% (w/w) mixture of a synthetic poly-α-olefin and a trimethylol propane trioleate ester, respectively) and one of the three following surfactants: Brij-76 (polyethylene glycol octadecyl ether, non-ionic), CTAB (hexadecyltrimethyl ammonium bromide, cationic), and Oleth-10 (glycolic acid ethoxylate oleyl ether, anionic). Experimental results show a strong influence of operating conditions, such as pressure or bath temperature, on the evaporation performance. As a general trend, the higher the values of these parameters, the higher the pollutant content in the obtained aqueous effluent. The presence of surfactants increase the evaporation rate, especially at low operating vacuum pressures, the solubility of oil molecules in water and the evaporation temperature of model O/W emulsions. Furthermore, COD reductions higher than 99.5% for the treated waste O/W emulsions were achieved.     

Highly Efficient Deep‐Blue Electrophosphorescent Pt(II) Compounds with Non‐Distorted Flat Geometry: Tetradentate versus Macrocyclic Chelate Ligands

A new class of deep blue electrophosphorescent Pt(II) emitters have been designed and synthesized. This new class of deep blue Pt(II) emitters employ tetradentate and macrocyclic chelate chromophores to constrain the Pt(II) molecules in a non‐distorted flat geometry in both the ground state and the excited state. The new deep blue emitters do not produce excimer emission, with emission quantum efficiency as high as 95% in 10% doped PMMA (poly(methyl methacrylate) films, and excellent UV stability, compared to the corresponding bidentate Pt(II) emitters. The macrocyclic tetradentate chelate Pt(II) compounds are the first examples of fully sterically constrained deep blue Pt(II) emitters that do not display structural distortion and have a higher thermal stability and a higher emission quantum efficiency than the corresponding non‐macrocyclic tetradentate Pt(II) analogues. A computational study supports that the macrocylic Pt(II) compounds are structurally more stable than the tetradentate Pt(II) molecules. Bright and efficient deep blue electrophosphorescent devices using a macrocyclic Pt(II) emitter have been successfully fabricated with a maximum brightness of 10 680 cd m^?2, maximum external quantum efficiency of 15.4% (at 490 cd m^?2), and Commission Internationale de L'Eclairage (1931) coordinates (x + y ) of less than or near 0.30, respectively.     

Conjugated Porous Polymers Based on BODIPY and BOPHY Dyes in Hybrid Heterojunctions for Artificial Photosynthesis

Developing highly efficient photocatalysts for artificial photosynthesis is one of the grand challenges in solar energy conversion. Among advanced photoactive materials, conjugated porous polymers (CPPs) possess a powerful combination of high surface areas, intrinsic porosity, cross-linked nature, and fully π-conjugated electronic systems. Here, based on these fascinating properties, organic–inorganic hybrid heterostructures composed of CPPs and TiO₂ for the photocatalytic CO₂ reduction and H₂ evolution from water are developed. The study is focused on CPPs based on the boron dipyrromethene (BODIPY) and boron pyrrol hydrazine (BOPHY) families of compounds. It is shown that hybrid photocatalysts are active for the conversion of CO₂ mainly into CH₄ and CO, with CH₄ production 4 times over the benchmark TiO₂. Hydrogen evolution from water surpassed by 37.9-times that of TiO₂, reaching 200 mmol g_cat⁻¹ and photonic efficiency of 20.4% in the presence of Pt co-catalyst (1 wt% Pt). Advanced photophysical studies, based on time-resolved photoluminescence and transient absorption spectroscopy, reveal the creation of a type II heterojunction in the hybrids. The unique interfacial interaction between CPPs and TiO₂ results in longer carriers’ lifetimes and a higher driving force for electron transfer, opening the door to a new generation of photocatalysts for artificial photosynthesis.     

Monitoring particle adsorption by use of laser reflectometry near the critical angle

We investigate the use of laser reflectometry near the critical angle to monitor particle adsorption onto a flat glass surface. Experimental results show that positive particles are adsorbed onto the glass surface and that their adsorption kinetics depend strongly on the volume fraction occupied by the particles in suspension but not appreciably on the particle size. The reflectance near the critical angle is dominated by the particles on the surface, with the contribution of the particles in suspension being very low. We compare the reflectance change near the critical angle with the change in reflectance near the Brewster angle when particles are adsorbed onto the glass surface. We find that reflectometry near the critical angle is 3000 times more sensitive than it is near the Brewster angle. Some optical images are presented to validate our results.     

Stability of the antimicrobial activity of acetogenins from avocado seed,under common food processing conditions,against Clostridium sporogenes vegetative cell growth and endospore germination

Anticlostridial activity of acetogenins from avocado seed was further characterised, and their stability and effectiveness under food processing conditions, and in a model food system, studied for the first time. Isolated AcO‐avocadenyne (1) and AcO‐avocadene (2) showed anticlostridial potential, particularly the latter molecule. Enriched acetogenins extracts, obtained at laboratory scale (EAE) and semi‐commercially (Avosafe^®), presented similar MIC values (3.9–9.8 ppm) and a bacteriostatic effect. Extracts bioactivity showed resistance to heat (≤120 °C), high hydrostatic pressure (HHP; 300–600 MPa, 3–6 min, 25 °C) and salt (≤3% w/v). In addition, the extract was most stable at pH ≥ 7.0 and potency against endospores increased after HHP treatment and exposure to pH 9.5, suggesting a positive effect on solubility or structure of particular acetogenins. In a model food system processed by HHP, acetogenins were retained; however, initial quantities gradually declined by 63% and 32% at 25 and 4 °C, respectively, at the end of the storage period (42 days). Most stable molecules (persediene (4) > persenones > AcO‐avocadene (2)) possess a keto or trans‐enone group at C‐4 in the aliphatic chain, which could support hydrogen donation to surrounding carbon atoms and confer antioxidant activity. Active endospores were completely inhibited by 5000 ppm Avosafe^® in the model food system (37 °C, 72 h) and lower concentrations (500–1000 ppm) resulted in 1–2 log reduction of a 3 log inoculum target. Efficacy information generated in the present work is considered crucial to improve scientific knowledge on spore inhibition properties of avocado acetogenins.     

Standardizing formats of corporate source data

This paper describe an approach for improving the data quality of corporate sources when databases are used for bibliometric purposes. Research management relies on bibliographic databases and citation index systems as analytical tools, yet the raw resources for bibliometric studies are plagued by a lack of consistency in fied formatting for institution data. The present contribution puts forth a Natural Language Processing (NLP)-oriented method for the identification of the structures guiding corporate data and their mapping into a standardized format. The proposed unification process is based on the definition of address patterns and the ensuing application of Enhanced Finite-State Transducers (E-FST). Our procedure was tested on address formats downloaded from the INSPEC, MEDLINE and CAB Abstracts. The results demonstrate the helpfulness of the method as long as close control of errors is exercised as far as the formats to be unified. The computational efficacy of the model is noteworthy, due to the fact that it is firmly guided by the definition of data in the application domain.