A SIMPLE METHOD FOR STUDYING THE KINETICS OF GAS-SOLID REACTIONS IN A FLUIDIZED BED REACTOR

A methodology for studying the kinetics of gas-solid reactions in a fluidized bed reactor is presented. This procedure is based on the analysis of the response of the system (flue gases) when batches of solids of different weight are added to the reactor. The method has been applied to the study of limestone particle calcination. The calcination rate constants obtained are in good agreement with those found in the literature. The method offers the advantage of simplicity and avoids the use of model assumptions or empirical correlations.     

Homogeneous Catalyzed Ozone Decomposition in the Presence of Co(II).

The homogeneous decomposition of ozone in the presence of a Co(II) catalyst has been investigated in aqueous solution. Under the conditions investigated (Co(II) concentration: 0.0 – 2.0?ppm, pH: 1.6- 8.4, O₃ concentration: 5 10^?5 – 2.0 10⁴?M) the process can be assumed to follow pseudo first order kinetics with respect to ozone. Cobalt concentration dependency also obeys first order kinetics although it may be considered to reach a steady state concentration. pH exerts a positive influence on the decomposition rate from 1.6 to 7.1, the process leveling off at pH 8.4. An Arrhenius analysis of the temperature effect gave a moderate activation energy of the global reaction (E=10917?cal mol^?1). A more detailed radical mechanism than a simple pseudo first order reaction can be postulated for simulation purposes. By numerical optimization of some unknown kinetic constants the influence of several operating variables can be adequately predicted.     

Effect of temperature on the separation of some Δ9-cis-trans isomers of methyl esters of fatty acids by open tubular gas chromatography

The influence of temperature on the gas chromatographic separation ofcis-trans isomers of the methyl esters of some monounsaturated fatty acids was studied on capillary columns coated with Apiezon L, BDS and DEGS. As far as methyl oleate and methyl elaidate are concerned, the separation is better at lower temperatures on Apiezon L (180–210 C) and at higher temperatures on polyester phases (BDS, DEGS; 150–180 C). The influence of temperature on the separation ofcis-trans isomers on the three stationary phases under study is explained by the higher values of δECL/δt forcis isomers. The variation of the equivalent carbon chain length with temperature can be used for the identification ofcis-trans isomers in natural mixtures.     

Universal variable length coding for an integrated approach to image coding

We propose a new entropy coding scheme, denoted in this paper as the UVLC (universal variable length coding). It is universal in the sense that its efficiency is close to one for a large class of images. The UVLC, when it is applied to block orthogonal transforms, processes groups of blocks at the bit level, using universal codes designed for binary memoryless sources. It can be used for every video coding application, from high definition TV (HDTV) to high quality videotelephony (above 2 Mbit/s) for transform or subband coding. Last but not least, its implementation is very regular and can be realized in a single chip for the encoding oftv at theccir 601 format.     

A computational fluid dynamic analysis of gas and particle flow in flame spraying

The flame spraying process, which is a common industrial thermal spraying application, has been analyzed by means of three-dimensional computational fluid dynamics (CFD) simulations. The process used at the Volvo Aero Corporation for the coating of fan and compressor housings has been modeled. The process uses the Metco 6P torch (Metco, Westbury, NY), which ejects a mixture of acetylene and oxygen at high speed through a ring of 16 orifices to form the flame. A stream of argon gas flowing through an orifice in the center of the ring carries a powder of nickel-covered bentonite through the flame to the spray substrate. The torch is cooled by a flow of air through an outer ring of 9 orifices. The simulation emulated reality closely by including the individual inlets for fuel, cooling air, and injected particles. The gas combustion was simulated as a turbulent, multicomponent chemically reacting flow. The standard, two-equation k-ε turbulence model was used. The chemical reaction rates appeared as source terms in the species transport equations. They were computed from the contributions of the Arrhenius rate expressions and the Magnussen and Hjertager eddy dissipation model. The first simulations included several intermediate chemical substances whose predicted concentration agreed favorably with measurements. Later, more simplified simulations incorporated only the global chemical reaction involving the initial and the final products, with corrections to the thermal properties being made to account for the missing intermediaries. The gas velocity and temperature fields predicted by the later simulations compared satisfactorily to those predicted by the earlier, more elaborate, ones. Therefore, the final simulations, which incorporated injected particles, were conducted employing the simplified model with only the global reaction. An in-house finite difference code was developed to calculate particle properties. Allowance was made for elliptical shapes, phase changes, and internal heat transfer with regard to the composite material. The particle velocities and temperatures predicted by the final simulations compared fairly well with experimental results obtained with the optical DPV2000 system.     

Photoacoustic technique for simultaneous measurements of thermal effusivity and absorptivity of pigments in liquid solution

A photoacoustic (PA) methodology, in the transmission configuration, for simultaneous measurements of thermal effusivity and molar absorption coefficient (absorptivity) for pigments in liquid solution is introduced. The analytical treatment involves a self-normalization procedure for the PA signal, as a function of the modulation frequency, for a strong absorbing material in the thermally thin regime, when the light travels across the sample under study. Two fitted parameters are obtained from the analysis of the self-normalized PA amplitude and phase, one of them proportional to the sample's optical absorption coefficient and from which, taking it for a series of samples at different concentrations, the pigment's absorptivity in liquid solution can be measured, the other one yields the sample's thermal effusivity. Methylene blue's absorptivity in distilled water was measured with this methodology at 658 nm, finding good agreement with the corresponding one reported in the literature.     

Note: The intermodulation lockin analyzer

Nonlinear systems can be probed by driving them with two or more pure tones while measuring the intermodulation products of the drive tones in the response. We describe a digital lockin analyzer which is designed explicitly for this purpose. The analyzer is implemented on a field-programmable gate array, providing speed in analysis, real-time feedback, and stability in operation. The use of the analyzer is demonstrated for intermodulation atomic force microscopy. A generalization of the intermodulation spectral technique to arbitrary drive waveforms is discussed.     

Efficient wavelet-based ECG processing for single-lead FHR extraction

This paper describes a novel model for fetal heart rate (FHR) monitoring from single-lead mother?s abdomen ECG (AECG) measurements. This novel method is divided in two stages: the first step consists on a one-step wavelet-based preprocessing for simultaneous baseline and high-frequency noise suppression, while the second stage efficiently detects fetal QRS complexes allowing FHR monitoring. The presented structure has been simplified as much as possible, in order to reduce computational cost and thus enable possible custom hardware implementations. Moreover, the proposed scheme and its fixed-point modeling have been tested using real abdominal ECG signals, which allow the validation of the presented approach and provide high accuracy.